Seagull Lighting 8438701-12 Installation guide

Seagull Lighting
Brand
Seagull Lighting
Model
8438701-12
Type
Installation guide
Installation Instructions for
Sevier 1 Light Outdoor Wall
990W83387_1-84387_1-SEV
8338701, 8338751, 8438701, 8438751
1.1
WALL
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for wet locations.
Incandescent version may be dimmed with a standard incandescent
dimmer. version may be dimmed with a dimmer. ConsultLED LED
lamp manufacturer for additional information.
This instruction shows a typical installation.
CAUTION RISK OF FIRE-
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.generationlighting.com
© 2020 Generation Lighting.All rights reserved.
The "Generation Lighting" graphic is a registered trademark of
Generation Lighting. Generation Lighting reserves the right to
change specifications for product improvements without notification.
SAVETHESE INSTRUCTIONS!
2
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align and place the fixture base onto the mounting plate studs and secure it with the two cap nuts.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
For Model 83387_1: Skip to step 9.Install the shade to the fixture and secure it in place with the fixture screws.
For Model 84387_1: Insert shade studs into the fixture and secure the shade in place with the cap nuts.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
6
7
Install the Fixture
8
9
1A
9
LAMP
SOCKET
SHADE
CAP NUT
(MODEL 84387_1 ONLY)
FIXTURE STUD
(MODEL 84387_1 ONLY)
8
3
4
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE STUD
MOUNTING
PLATE
JUNCTION BOX
FIXTURE BASE
CAP NUT
SHADE SCREW
(MODEL 83387_1 ONLY)
7
6
6
  • Page 1 1
  • Page 2 2

Seagull Lighting 8438701-12 Installation guide

Seagull Lighting
Brand
Seagull Lighting
Model
8438701-12
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents