Milesight MS-C3262-FPN User manual

Brand: Milesight

Model: MS-C3262-FPN

Category: Video servers/encoders

Type: User manual

User Manual

www.milesight.com

Version: V5.04

User Manual

www.milesight.com

About this Document

This Manual explains how to use and manage Milesight network cameras on your network.

Previous experience of networking will be of use when using the products. This manual applies to

the following camera models, except where otherwise indicated.

Please read this manual carefully before operation and retain it for future reference.

Megapixel

Type

1.3MP 2MP 3MP 5MP

Mini Dome Camera MS-C2181-P

MS-C2681-P MS-C3581-P MS-C3586-P MS-C3688-P

IR Mini Dome Camera MS-C2182-P

MS-C2682-P MS-C3582-P MS-C3587-P MS-C3689-P

Mini Bullet Camera MS-C2163-PN MS-C3263-PN

MS-C3363-PN

MS-C3367-PN

MS-C3567-PN -

Motorized Mini Bullet MS-C2163-FPN MS-C3263-FPN

MS-C3363-FPN

MS-C3367-FPN

MS-C3567-FPN

Mini Cube Camera MS-C2191-PW MS-C3291-PW MS-C3596-PW -

Vandal-proof Mini Dome MS-C2173-P MS-C3273-P

MS-C3373-P

MS-C3377-P

MS-C3577-P

IR Dome Camera MS-C2172-P MS-C3272-P

MS-C3372-P

MS-C3376-P

MS-C3576-P -

Varifocal IR Dome Camera MS-C2172-VP MS-C3272-VP

MS-C3372-VP

MS-C3576-VP

MS-C3376-VP --

Varifocal Bullet Camera MS-C2162-VP MS-C3262-VP

MS-C3362-VP

MS-C3566-VP

MS-C3366-VP -

Remote Focus Zoom Bullet Camera MS-C2162-FP MS-C3262-FP

MS-C3362-FP

MS-C3566-FP

MS-C3366-FP -

New Remote Focus Zoom Bullet

Camera

MS-C2162-F(I)P

MS-C3262-F(I)PN

MS-C3362-F(I)PN

MS-C3366-F(I)PN

MS-C3566-F(I)PN -

Box Camera MS-C2151-PM - MS-C3356-PM MS-C3658-PM

External Varifocal Bullet Camera MS-C2162-EP MS-C3262-EP

MS-C3363-EP

MS-C3366-EP

MS-C3566-EP -

User Manual

www.milesight.com

This manual may not be reproduced in any form or by any means to create any derivative such

as translation, transformation, or adaptation without the prior written permission of Milesight

Technology Co., Ltd(Hereinafter referred to as Milesight).

Milesight reserves the right to change this manual and the specifications without prior notice.

The latest specifications and user documentation for all Milesight products are available on our

official website www.milesight.com

WarningsSerious injury or death may be caused if any of these warnings are neglected.

CautionsInjury or equipment damage may be caused if any of these cautions are neglected.

WarningsPlease follow these safeguards to

prevent injury or death.

CautionsPlease follow these precautions to

prevent potential injury or material damage.

Warning

This installation must be conducted by a qualified service person and should strictly

comply with the electrical safety regulations of the local region

To avoid risk of fire and electric shock, do keep the product away from rain and moisture

Do not touch components such as heat sinks, power regulators, and processors, which

may be hot

Source with DC 12V or PoE

Please make sure the plug is firmly inserted into the power socket

When the product is installed on a wall or ceiling, the device should be firmly fixed

If the product does not work properly, please contact your dealer. Never attempt to

disassemble the camera yourself

Cautions

Make sure that the power supply voltage is correct before using the camera

Do not store or install the device in extremely hot or cold temperatures, dusty or damp

locations, and do not expose it to high electromagnetic radiation

Only use components and parts recommended by manufacturer

Do not drop the camera or subject it to physical shock

To prevent heat accumulation, do not block air circulation around the camera

Laser beams may damage image sensors. The surface of image sensors should not be

exposed to laser beam where a laser beam equipment is used

Use a blower to remove dust from the lens cover

User Manual

www.milesight.com

Use a soft, dry cloth to clean the surfaceof the camera. Stubborn stains can be removed

using a soft cloth dampened with a small quantity of detergent solution, then wipe dry

Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the

surface finishes

Save the package to ensure availability of shipping containers for future transportation

Environmental Protection

Please recycle this device in a responsible manner. Refer to local environmental regulations for

proper recycling. Do not dispose of devices in unsorted municipal waste.

User Manual

www.milesight.com

Table of Contents

Chapter I Product Description.............................................................................................................. 1

1.1 Product Overview.................................................................................................................... 1

1.2 Key Features............................................................................................................................ 1

1.3 Hardware Overview.................................................................................................................2

1.4 Hardware Installation.............................................................................................................. 5

1.5 System Requirements..............................................................................................................8

Chapter II Network Connection............................................................................................................9

2.1 Setting the camera over the LAN............................................................................................ 9

2.1.1 Connect the camera to the PC directly......................................................................... 9

2.1.2 Connect via a Switch or a Router.................................................................................. 9

2.2 Setting the camera over the WAN.........................................................................................10

2.2.1 Static IP Connection.................................................................................................... 10

2.2.2 Dynamic IP Connection............................................................................................... 10

Chapter III Accessing the Network Camera........................................................................................ 12

3.1 Assigning An IP Address.........................................................................................................12

3.1.1 Assigning An IP Address Using IPCTools...................................................................... 12

3.1.2 Assign An IP Address Manually................................................................................... 16

3.2 Accessing from the Web Browser......................................................................................... 19

3.2.1 Access over IE Browser................................................................................................19

3.3 Accessing from Milesight VMS (Video Management Software)........................................... 21

Chapter IV System Operation Guide...................................................................................................23

4.1 Live Video.............................................................................................................................. 23

4.2 Playback.................................................................................................................................25

4.3 Basic Settings.........................................................................................................................27

4.3.1 Video............................................................................................................................27

4.3.2 Image...........................................................................................................................29

4.3.3 Audio........................................................................................................................... 31

4.3.4 Network.......................................................................................................................32

4.3.5 Wi-Fi*.......................................................................................................................... 34

4.3.6 Date &Time..................................................................................................................36

4.4 Advanced Settings................................................................................................................. 37

4.4.1 SIP................................................................................................................................ 37

4.4.2 UPNP............................................................................................................................39

4.4.3 DDNS............................................................................................................................40

4.4.4 PPPoE...........................................................................................................................40

4.4.5 VLAN............................................................................................................................ 41

4.4.6 SMTP............................................................................................................................42

4.4.7 FTP............................................................................................................................... 42

4.4.8 Alarm........................................................................................................................... 43

4.4.9 Snapshot......................................................................................................................45

User Manual

www.milesight.com

4.4.10 Privacy Masking.........................................................................................................45

4.4.11 ROI............................................................................................................................. 46

4.4.12 Record Schedule........................................................................................................46

4.4.13 Storage.......................................................................................................................47

4.4.14 PTZ............................................................................................................................. 49

4.4.15 User........................................................................................................................... 49

4.4.16 Access List..................................................................................................................51

4.4.17 Logs............................................................................................................................52

4.5 System................................................................................................................................... 52

4.6 Maintenance..........................................................................................................................53

Chapter V Services................................................................................................................................0

User Manual

www.milesight.com 1

Chapter I Product Description

1.1 Product Overview

Milesight provides a consistent range of cost-effective and reliable network cameras to fully

meet your requirements. Based on embedded LINUX operating system, Milesight network

cameras could be easily accessed and managed either locally or remotely with great reliability.

With the TI DaVinci processor and built-in high-performance DSP video processing modules, the

cameras pride on low power consumption and high stability. They support state-of-the-art H.264

video compression algorithm and industry-leading HD dual-stream technology to achieve the

highest level of video image quality under the limited network resources. It is fully functional,

supporting for flexible and comprehensive alarm linkage mechanism, day and night auto switch,

smart PTZ control and privacy masking, etc.

In practical applications, Milesight network camera could either work independently in the local,

or be networked to form a powerful safety monitoring system. It is widely used in fields such as

finance, education, industrial, civil defense, health care for security’s sake.

1.2 Key Features

Based on LINUX OS with high reliability

H.264/MPEG-4/MJPEG video compression capability

G.711/AAC audio compression capability

Support ONVIF, PSIA protocol

Dual-stream

Power over Ethernet

Audio input/output, alarm input/output(built-in for box cameras, optional for bullet and

dome cameras)

IR cut filter with auto switch, true day/night

Built-in WEB server, support IE/Firefox/Chrome/Safari browser

Real-time video electronic amplification

Three-privilege levels of users for flexible management

SD/SDHC card local storage support, expand the edge storage(applicable for box and

Dome cameras)

Local PAL/NTSC signal output

Standard RS-485 interface, multiple PTZ control protocol

Motion detection, privacy masking, network fault detection and image snapping

UPNP protocol for the easy management of IPC

True Wide Dynamic Range (Optional feature according to the model selected)

User Manual

www.milesight.com 2

1.3 Hardware Overview

1. Box Camera

*Error LED

Power LED

*Reset Button

Ethernet Port

BNC Video Out

Power Connector (DC12V)

Alarm Output

RS-485 PTZ control

Alarm Input

Antenna for WIFI (Optional)

Audio Input

SD/SDHC Card Slot

Audio Output

Figure1-1

*Note:

1) Error LED: Error LED is on when the device starts up or runs error.

2) Reset Button: Press ‘Reset’ button for 5 seconds, the device will be restored to factory default.

3) The network camera provides a general I/O terminal block which is used to connect external

input/output devices. Please refer to the following instruction for the connection method.

User Manual

www.milesight.com 3

Figure1-2

2. Bullet Camera

Figure 1-3

*Note:

1) The network camera provides a general I/O terminal block which is used to connect external

input/output devices. Please refer to the following instruction for the connection method.

Power Connector (DC 12V)

Alarm Input/ Output

RS-485 PTZ control

Ethernet Port

Lens

Video Output

Light Sensor

IR LED

Audio Output

Lens

Audio Input

User Manual

www.milesight.com 4

Figure 1-4

3. Dome Camera

Video Output

Power Connector (DC 12V)

Audio Output

Audio Input

RS-485 PTZ control

Alarm Input/ Output

Ethernet Port

Figure 1-5

*Note:

1) The network camera provides a general I/O terminal block which is used to connect external

User Manual

www.milesight.com 5

input/output devices. Please refer to the following instruction for the connection method.

Figure 1-6

1.4 Hardware Installation

1. Connect the camera to the network and power using one of the methods listed below:

1) Basic connection (without PoE):

Step 1: connect the DC 12V end of the power adapter to the power port of the camera and

connect the other end to a wall outlet;

Step 2: connect the camera to a switch using an Ethernet cable.

Figure 1-7 Box Camera

User Manual

www.milesight.com 6

Figure 1-8 Bullet Camera

Figure1-9 Dome Camera

2) Power over Ethernet (PoE) connection. PoE will be automatically detected when the Ethernet

cable is connected. The camera can either be connected to a PoE-enabled switch or a non-PoE

switch.

A. Connect the camera to a PoE switch using a single Ethernet cable.

User Manual

www.milesight.com 7

Figure 1-10 Box Camera

Figure 1-11 Bullet Camera

Figure 1-12 Dome Camera

B. Connect the camera to a non-PoE switch using the PoE injector

Step 1: Connect the camera to a PoE injector using an Ethernet cable.

Step 2: Connect the PoE injector to the non-PoE switch using an Ethernet cable.

Step 3: Connect the PoE injector to a power outlet.

User Manual

www.milesight.com 8

Figure 1-13 Box Camera

Figure 1-14 Bullet Camera

Figure 1-15 Dome Camera



The power LED will light steady red when the camera is connected to a power source

2. Optionally connect external input/output devices, such as alarm devices.

3. Optionally connect an active speaker or external microphone.

4. Optionally connect the camera to a monitor using a BNC cable.

1.5 System Requirements

Operating Syestem:Windows XP/7/Vista/Server 2000/Server 2008

CPU: 1.66GHz or higher

RAM:1G or higher

Graphic memory:128MB or more

Internet protocol: TCP/IP (IPv4)

Web Browsers:Interner Explorer 8.0 and above version,Mozilla Firefox ,Google Chrome and

Safari.

User Manual

www.milesight.com 9

Chapter II Network Connection

There are several methods to connect the camera to the network.

2.1 Setting the camera over the LAN

Connecting the camera to a switch or a router is the most common connection method. The

camera must be assigned an IP address that is compatible with its LAN.

2.1.1 Connect the camera to the PC directly

In this method, only the computer connected to the camera will be able to view the camera. The

camera must be assigned a compatible IP address to the computer. Details are shown as below

figure.

Figure 2-1 Connect the camera to the PC directly

2.1.2 Connect via a Switch or a Router

Refer to the following figure to set network camera over the LAN via the switch or router.

Figure 2-2 Connect via a Switch or a Router

User Manual

www.milesight.com 10

2.2 Setting the camera over the WAN

The camera could be connected to the WAN directly. You need to set the static or dynamic WAN IP

address assigned by the ISP (Internet Service Provider).

2.2.1 Static IP Connection

Connecting the network camera with static IP directly

You can also save the static IP in the camera and directly connect it to the internet without using a

router. Details are as follow.

Figure2-3 Connecting the network camera with static IP directly

Connecting the network camera via a router

Steps:

1. Connect the network camera to the router.

2. Assign a LAN IP address, the subnet mask and the gateway.

3. Save the static IP in the router.

4. Set port mapping, E.g., 80, 8000 and 554 ports. The steps for port mapping vary depending on different

routers. Please call the router manufacturer for assistance with port mapping.

5. Visit the network camera through a web browser or Milesight VMS over the internet.

Figure 2-4 Connecting the network camera via a router using static IP

2.2.2 Dynamic IP Connection

Connecting the network camera via a router

User Manual

www.milesight.com 11

Steps:

1. Connect the network camera to the router.

2. In the camera, assign a LAN IP address, the subnet mask and the gateway.

3. In the router, set port mapping. E.g. 80, 8000 and 554 ports. The steps for port mapping vary

depending on different routers. Please call the router manufacturer for assistance with port

mapping.

4. Apply a domain name from a domain name provider.

5. Configure the DDNS settings in the setting interface of the router.

6. Visit the camera via the domain name.

Figure 2-5 Connecting the network camera via a router using dynamic IP

User Manual

www.milesight.com 12

Chapter III Accessing the Network Camera

3.1 Assigning An IP Address

The camera must be assigned an IP address to be accessible. The default IP address of Milesight

network camera is 192.168.5.190. The default user name is admin, and password is ms1234.

You can either change the IP address of the camera via IPCTools or manually. Please connect the

camera in the same LAN of your computer.

3.1.1 Assigning An IP Address Using IPCTools

IPCTools is a software tool which can automatically detect multiple online Milesight network

cameras connected in the LAN, set IP addresses, and manage firmware upgrades. It’s

recommended when assigning IP addresses for multiple cameras.

Step 1: Install IPCTools (The software could be downloaded from CD.)

Step 2: Start IPCTools, and the device information including IP address, MAC address, Port number,

Netmask, and Gateway of all Milesight network cameras will be displayed. Details are

shown as Figure 3-1.

Figure 3-1

Step 3: Select a camera or multiple cameras according to the MAC address.

User Manual

www.milesight.com 13

Figure 3-2 Select single camera

Figure 3-3 Select multiple cameras

Step 4: Type the User Name and Password (if they are not default value.)

User Manual

www.milesight.com 14

Figure 3-4

Step 5: Change the IP address or other network values, and then click “Modify” button.

Figure 3-5

Step 6: Change the IP address successfully.

Page is loading ...

Milesight MS-C3262-FPN User manual

Brand: Milesight

Model: MS-C3262-FPN

Category: Video servers/encoders

Type: User manual

Download PDF

report

Milesight MS-C3262-FPN User manual

Milesight MS-C3262-FPN User manual

Related papers

Other documents