JasonL BSFC10FME Operating instructions

Type
Operating instructions

This manual is also suitable for

Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran System
Round Meeting Table
Sizes: 800mm & 1000mm
Page 1 of 3
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Leg x3
Adjustable Foot x3
Leg Cable Cover x3
Beams x3 (90mm or 220mm)
2 Way Connector x3
2 Way Connector Cap x3
Round Table Top x1
1
2
3
4
5
6
7
M8x20mm Dome Head x6
M8x20mm Cap Head x3
M5x20mm Self Tapping x6
8
9
10
COMPONENTS
SCREWS
Page 2 of 3
INSTALLATION GUIDE
San Fran System
Round Meeting Table
Sizes: 800mm & 1000mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
7
10
98
4
3
1
2
5
6
01
Slide the 2 way connectors over each leg, and securely lock into place using
M8x20mm cap head bolts.
Ensure the worksurface is centered over the frame. Fully tighten all
M5x20mm self tapping screws through each leg into the worksurface.
Page 3 of 3
INSTALLATION GUIDE
San Fran System
Round Meeting Table
Sizes: 800mm & 1000mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Securely connect legs to beams lenghts using the shorter M8x20mm dome
head bolts.
Conceal any power cable using the magnetic leg cable covers.
04
03
02
  • Page 1 1
  • Page 2 2
  • Page 3 3

JasonL BSFC10FME Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI