Armed with advanced yet compact data collection, miniaturization
and digital signal processing technologies, our Field Service
Engineers have the most comprehensive on-machine analysis
capabilities in the industry.
We can perform a full range of comparative and trend analyses and
diagnostics at your site to improve the performance, mechanical
condition and reliability of your high-speed reciprocating
compressors.
A step towards predictive maintenance
• Periodic monitoring of the machinery’s actual operating
conditions is mandatory for predictive maintenance
• On-board machinery supervisory systems currently
installed in most plants cannot provide complete knowledge
of compressor behavior
• Portable diagnostics are much less intrusive than on-board
systems – in fact, the number of on-board sensors can be
reduced with our portable systems
Real-time on-machine capabilities
• Pressure vs. crank angle
• Vibration vs. crank angle
• Ultrasonic vs. crank angle
• Pressure vs. volume
• Log pressure vs. log volume
• Historical data recall
• Graphical overlay plots
• Theoretical overlay plots
• Compressor performance reports and calculations
• Vibration vs. time
• FFT of vibration / FFT averaging
• Time synchronous averaging
• Optional 4-channel transient analysis
Portable diagnostics
The fastest way to assess your HSR
compressor performance and enable
higher production efficiency
Our portable diagnostics service, available for
current and legacy product lines, utilizes the
latest technologies and draws on over 30 years
of in-field operating experience in our installed
fleet of 15,000+ units
GE Oil & Gas
Timebase/FFT plot
Compressor rod-load plot
Our fully certified Field Service Engineers and fleet of
service vehicles are available for fast response to all
your maintenance, repair and diagnostics needs
Compressor analysis
• Mechanical looseness
• Piston and nut
• Crosshead
• Pin and bushing
• Leaking valves and rings
• Cylinder and piping pulsations
• Passage flow restrictions
• Defective unloaders
• Excessive rod loading
• Inadequate rod reversal
• Defective rider bands and liner wear
• Excessive valve losses and deficiencies
• Clearance discrepancies
• Horsepower and capacity variances
There is no substitute for OEM expertise
In-field monitoring by a GE Oil & Gas specialist enables immediate
action to increase the efficiency and operating performance of
your high-speed reciprocating compressor. No matter where in the
world your plant is located, our Field Service Engineers are able to
mobilize quickly to analyze your compressor and get it back to peak
efficiency and reliability.
© 2013 General Electric Company. All rights reserved.
GE_HSR_PD_FS_040513
4424 West Sam Houston Parkway North, Houston, TX 77041
+1 713 683 2400
geoilandgas.com/hsr
GE imagination at work
Timebase/FFT plot
Compressor rod-load plot
Our fully certified Field Service Engineers and fleet of
service vehicles are available for fast response to all
your maintenance, repair and diagnostics needs
Compressor analysis
• Mechanical looseness
• Piston and nut
• Crosshead
• Pin and bushing
• Leaking valves and rings
• Cylinder and piping pulsations
• Passage flow restrictions
• Defective unloaders
• Excessive rod loading
• Inadequate rod reversal
• Defective rider bands and liner wear
• Excessive valve losses and deficiencies
• Clearance discrepancies
• Horsepower and capacity variances
There is no substitute for OEM expertise
In-field monitoring by a GE Oil & Gas specialist enables immediate
action to increase the efficiency and operating performance of
your high-speed reciprocating compressor. No matter where in the
world your plant is located, our Field Service Engineers are able to
mobilize quickly to analyze your compressor and get it back to peak
efficiency and reliability.
© 2013 General Electric Company. All rights reserved.
GE_HSR_PD_FS_040513
4424 West Sam Houston Parkway North, Houston, TX 77041
+1 713 683 2400
geoilandgas.com/hsr
GE imagination at work
/
