2. Danfoss
  3. ECL 2000 & ECL Comfort 200/300

Danfoss ECL 2000 & ECL Comfort 200/300 User guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss ECL 2000 & ECL Comfort 200/300 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Application Sheet
Lit. No.
VY7FK102
Date:
2000-02-04
ECL 2000/Comfort with OPC-Server
for local Network Communication & via Internet
ECL 2000
ECL Comfort 200/300
PC with LON interface
and Internet access
ECL OPC-Server
installed
LON Network
ECL Comfort 200/300ECL 2000
Visualisation SW with
OPC-Driver support
INTERNET
PC with
Internet access
The Danfoss OPC-Server is a software
package, which is easy to install and which
enables Danfoss LON devices to inter-
operate with SCADA systems / PC based
visualization software via a LON network.
Features:
The Danfoss OPC-Server is a high perform-
ance server supporting all remotely control-
lable functions of ECL 2000 and ECL Com-
fort.
The products of the ECL range use standard
SNVT variables for exchange of values, as
well as proprietary variables for extending
the capabilities of the products.
Configurations:
The Danfoss OPC-Server will enable all
ECL devices on a LON network to ex-
change values with any OPC-compatible
(OPC-client) SCADA system, thus enabling
integrated remote monitoring and control of
applications.
With the free topology architecture of the
LONWORKS
®
network and the variety of
applications available, it will always be pos-
sible to configure a system to meet your re-
quirements.
Application Sheet
Lit. No.
VY7FK102
Date:
2000-02-04
What do I need?
For visualisation of network Data:
• SCADA System, Main Station or PC (Laptop) (Optional: with Internet access)
• Interface between LON network and the PC
• Visualisation software
• Danfoss OPC-Server
Optional:
• Additional SCADA system, main station or PC (Laptop) with Internet access
/