KWorld DVB-T 210 Installation guide

Brand: KWorld

Model: DVB-T 210

Type: Installation guide

DVB-T 210 Installation Manual

Contents

V1.0

Chapter 1: DVB-T 210 TV Card Hardware Installation....................................................................................2

1.1 Package Contents.................................................................................................................................2

1.2 System Requirements...........................................................................................................................2

1.3 Hardware Installation...........................................................................................................................2

Chapter 2 : DVB-T 210 Utilities And Drivers Setup.........................................................................................3

Chapter 3 : HyperMedia Software Installation..................................................................................................5

Chapter 4 : HyperMedia Software Functions ....................................................................................................7

Chapter 5 : Remote Control Key Definition......................................................................................................8

Chapter 6 : FAQ.................................................................................................................................................9

1. How to check to see if DVB-T 210 Utilities have been installed? ....................................................9

2. How to check if the drivers have been installed successfully or not?................................................9

Chapter 1: DVB-T 210 TV Card Hardware Installation

1.1 Package Contents

Unpack your DVB-T 210 package and make sure that all items are included. The following items should be

included in your package:

 DVB-T 210 PCI TV Card

 Multi-cable for AV/S-Video and Audio-Out

 Remote control and sensor

 DVB-T antenna

 FM Antenna

 HyperMedia user manual

 Installation manual

 Installation CD

1.2 System Requirements

 PC with Pentium-IV 1.6GHz or above

 256MB RAM of system memory or above

 PCI 2.2 compliant slot

 Graphics card (Must support DirectX 9.0)

 Sound card (AC97 compatible sound card)

 1GB free HD space

 CD-ROM drive (For software installation)

 Microsoft Windows® XP

1.3 Hardware Installation

Please follow the steps shown below to install the card into your computer:

1. Turn off all your computer

power and any peripherals.

2. Select an available PCI slot

and remove the slot cover,

screw, etc.

3. Push the PCI TV card

firmly into the slot until it

snaps in place and secure

the card by the screw you

removed from step 2.

4. Place the case lid back on

and power on.

Chapter 2 : DVB-T 210 Utilities And Drivers Setup

DVB-T 210 package comes with complete Windows software utilities. These utilities and drivers can be

found on the CD included in the package. During installation, it is highly recommended to disable any

sub-programs. These include applications such as antivirus software and system monitoring applications.

1. Once you finish the hardware installation, restart your

system. “Windows Found New Hardware Wizard” will

pop up. Please click “Cancel” and run the utilities setup

included in the CD.

2. Insert the installation CD into the CD ROM drive. The

auto run page will appear as the one on the left, please

select “Driver Install”.

3. The driver utilities will help you to install all the drivers.

Click “Next” to continue.

4. Then the utilities will help you install the TV card

driver automatically. Click “Next” to install the DVB-T

210 drivers.

5. Click “Start” to start installing DVB-T 210

drivers. Please wait while installation is in

process.

6. Choose “Yes, I want to restart my computer now” and

click “Finish” to restart your computer and activate the

driver.

Note: You can restart your computer after installing

HyperMedia software application

Chapter 3 : HyperMedia Software Installation

After the drivers are installed, the next step you need to do is to install “HyperMedia”. Please follow the

steps below to install it.

1. Insert the installation CD into the CD-ROM drive. The

auto run page appears as the one on the left. Click on

“HyperMedia” to start installation.

2. The InstallShield Wizard will guide you through

installation the HyperMedia application. Click “Next” to

continue.

3. Please choose the destination folder where you want to

install the files. You can click “Browse” to change the

destination folder.

4. Setup will add program icons to the Program Folder’s list.

You may type a new folder name, or select one from the

existing folders list. Click “Next” to start installing. Please

wait while installation is in process.

5. When the message as the one on the left pops up, click

“Finish” to end the installation.

Chapter 4 : HyperMedia Software Functions

When using HyperMedia, There are five different functions to choose from. Picture below is an example of

how the interface looks like and a short description of each function.

：Convert Film

：Edit Film

：Burn DVD

：Analog TVR

：Digital TVR

Note: For more detailed descriptions, please refer to HyperMedia user manual. Note that

this product could only watch either analog or digital TV rather than both at the same

time

Chapter 5 : Remote Control Key Definition

Open digital TV panel while watching analog TV

and vice versa

Preview channels in blocks of 9 or 16

Take snapshots for images that wanted to be taken

Shut down PC

Mute

Switch between Stereo and Mono sound

Switch between different AV input.

Eg. S-Video, Composite, Antenna, etc

Zoom function

Minimize the screen

Changing from digital TV to analog TV and vice

versa while both digital and analog TV are opened.

TimeShift function

Stops TimeShift function

Start recording

Channel Scan

Opens OSD function

Sleep Timer function

IEPG (Only works if your area supports IEPG)

This button does not have any function.

Chapter 6 : FAQ

1. How to check to see if DVB-T 210 Utilities have been installed?

Ans : To check the DVB-T 210 Utilities, follow the pictorial guide below and see if your “Start” menu have

the same file directories like the one below.

Fig.1

2. How to check if the drivers have been installed successfully or not?

Ans: Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties”

window, click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and

game controllers” to open the device list.

KWorld DVB-T 210 Installation guide

KWorld DVB-T 210 Installation guide

KWorld DVB-T 210 Installation guide

Related papers

Other documents