Follett Maestro Plus MMC425W BS Installation Instructions Manual

Follett
Brand
Follett
Model
Maestro Plus MMC425W BS
Type
Installation Instructions Manual

This manual is also suitable for

01062579R02
Order parts online
www.follettice.com
Maestro Plus
™
Ice Machine with RIDE
™
Technology
Installation Instructions for Ice Storage Bin
MCD425A/W BS, MCE425A/W BS, MME425A/W BS, MCC425A/W BS, MMC425A/W BS
(See model number congurator on page 2 for details.)
self-contained
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
2
Maestro Plus Bin  •  RIDE Technology
A V SC 425MC
ConfigurationApplication
S RIDE
®
(RIDE remote ice
delivery equipment)
T Top-mount
425 up to
454 lbs
(206kg)
V Vision™
H Harmony™
B Ice storage
bin
J Drop-in
CondenserSeriesVoltageMachine
C 208-230/60/1 Self-contained
D 115/60/1 Self-contained
E 230/50/1 Self-contained
MC Maestro Plus
Chewblet
(425 Series)
MF Maestro
Plus™Flake
P Replacement
R Symphony
Pus RIDE Ice
Machine
A Air-cooled, self-contained
W Water-cooled,
self-contained
Chewblet
®
Ice Machine Model Number Configurations
CAUTION!
• Thisapplianceshouldbeconnectedbyaqualiedpersoninaccordancewithapplicationcodes.
• Ifthesupplycordisdamaged,itmustbereplacedbythemanufacturer,itsserviceagentorsimilarlyqualied
personsinordertoavoidahazard.
• Connecttopotablewatersupplyonly.
• Thisappliancecanbeusedbychildrenaged8yearsandaboveandpersonswithreducedphysical,sensory,
ormentalcapabilities,orlackofexperienceandknowledgeiftheyhavebeengivensupervisionorinstruction
concerninguseoftheapplianceinasafewayandunderstandthehazardsinvolved.Childrenshouldbe
supervisedtoensurethattheydonotplaywiththeappliance.
• Thisapplianceisintendedtobeusedforhouseholdandsimilarapplicationssuchasstaffkitchenareasin
shops,officesandotherworkingenvironments;farmhousesandbyclientsinhotels,motelsandotherresidential
typeenvironments;bedandbreakfasttypeenvironments;cateringandsimilarnon-retailapplications.
• WARNING!Toavoidahazardduetoinstabilityoftheappliance,itmustbexedinaccordancewiththe
instructions.
Bin  •  RIDE Technology  Maestro Plus
3
Contents
Unpack ........................................................................................................................................................................4
UnpackIceMachine..............................................................................................................................................4
Site Preparation .......................................................................................................................................................... 5
Installationsiterequirements.................................................................................................................................5
Bin Top Preparation ....................................................................................................................................................6
Mountthermostatbox............................................................................................................................................6
Installshuttleactuatorandbracket........................................................................................................................6
Routethermostat...................................................................................................................................................6
Mount Ice Machine .....................................................................................................................................................7
External Connections ................................................................................................................................................7
Air-cooledicemachinesonly.................................................................................................................................7
Water-cooledicemachinesonly............................................................................................................................7
Binthermostatcable..............................................................................................................................................8
Transport tube installation ........................................................................................................................................9
Generalrequirements............................................................................................................................................9
Procedure...............................................................................................................................................................9
RIDE model ice machine start up procedure ........................................................................................................ 10
Beforeturningonpower......................................................................................................................................10
Afterturningonpower.........................................................................................................................................10
4
Maestro Plus Bin  •  RIDE Technology
1. Unpack
Carefully unpack and inspect the contents of your Follett ice machine.
1.1 Unpack Ice Machine
Bin  •  RIDE Technology  Maestro Plus
5
2. Site Preparation
Provide drainage, potable water supply and electrical power to within 6 feet (2m) of
ice machine in accordance with local and national codes. Outdoor installation is not
recommended and will void warranty.
2.1 Installation site requirements
➍
➋
➌
➊
1/4"
1'
5-15
NEMA
115 V ±5%
230 V ±10%
220 V ±10%
115 V
Electrical ➊
WARNING!
§ Thisapplianceshouldbeconnectedbyaqualiedpersoninaccordancewithapplicationcodes.
§ Ifthesupplycordisdamaged,itmustbereplacedbythemanufacturer,itsserviceagentorsimilarlyqualied
personsinordertoavoidahazard.
MCD425(A/W)BS115/60/1(115V±10%)15Abreaker
(MCDrequiresa15Adedicatedcircuit)
MCE425(A/W)BS(230/50/1-5.5A(fullload)
(MCE425A/Wrequiresadedicatedcircuit,1.50mm
2
wire)
MCC425(A/W)BS(220/60/1-5.5A(fullload)
(MCE425A/Wrequiresadedicatedcircuit)
*Requiresa15Adedicatedcircuit.
Potable Water Supply ➋
10psito70psi(69kpato483kpa) 45Fto90F(7Cto32C)
Condenser water supply for water-cooled systems
➌
10psimin.;125psimax.(69kpamin.;862kpamax.)
20Fto90F(–7Cto32C)
0.5gallons(1.9liters)perminute
Drain
➍
Thedrainlinefromtheicemachinemusthaveatleast1/4in.perfoot(6,4mm/0,3m)pitch
6
Maestro Plus Bin  •  RIDE Technology
3. Bin Top Preparation
3.1 Mount thermostat box 3.2 Install shuttle actuator and bracket
DOUBLE-SIDED TAPE
SHUTTLE
ACTUATOR
THERMOSTAT
GROMMET
NUT
THERMOSTAT
BRACKET
➊
➌
➍
➎
➋
➋
§ Applydouble-sidedtapetobottomofthermostatbox
andmountboxonbin.
§ Installthermostatgrommet
➊
.
§ Removeprotectivetapeandapplygaskets
➋
to
shuttleactuatorandnut.
§ Placeshuttleactuatorinhole➌.
§ Installthermostatbracket➍andnut➎.Ensure
thatnutcapturesthethermostatbracket,then
handtighten.
3.3 Route thermostat
SHUTTLE
ACTUATOR
2"
APPROX
1"
3/4" RADIUS
(APPROX.)
1
2
§ Routethermostatthroughgrommetandintobin
➊
.
§ Securethermostatinbracket
➋
.
Bin  •  RIDE Technology  Maestro Plus
7
4. Mount Ice Machine
Mounting options: Wall bracket or Floor stand
6.80"
(17.27 cm)
A
C
D
B
A - 15.125" (38.4 cm),
B - 18.625" (47.3 cm)
C - 13.25" (33.6 cm)
D - 20.75" (52.7 cm)
Wall bracket Floor stand
18.125"
(46.0 cm)
20.125"
(51.1 cm)
26.25"
(66.7 cm)
5. External Connections
5.1 Air-cooled ice machines only 5.2 Water-cooled ice machines only
CONDENSER
OUTLET
Front View - Water Cooled
Front View - Air Cooled
➌
➋
➍
➊
➋
➊
CONDENSER
OUTLET
Front View - Water Cooled
Front View - Air Cooled
➌
➋
➍
➊
➋
➊
§ Installdrainline
➊
(3/4”MPT).
Therigiddrainlinefromtheicemachinemusthave
atleast1/4"perfoot(6,4mm/0,3m)pitch.
§ Installicemachinepotablewatersupply
➋
(
3/8"FPT)
.
Note: FollettrecommendsaFollettwaterlter
systembeinstalledintheicemachineinlet
waterline(standardcapacity#00130299,high
capacity#00978957,carbonlesshighcapacity
#01050442).
§ Installdrainline
➊
(3/4"MPT).
Therigiddrainlinefromtheicemachinemust
haveatleast1/4"perfoot(6,4mm/0,3m)pitch.
§ Installicemachinepotablewatersupply
➋
(
3/8"FPT)
.
Note: FollettrecommendsaFollettwaterlter
systembeinstalledintheicemachineinlet
waterline(standardcapacity#00130299,
highcapacity#00978957,carbonlesshigh
capacity#01050442).
§ Connectcoolingwatersupply
➌
andreturn
➍
(
3/8"FPT).
8
Maestro Plus Bin  •  RIDE Technology
5.3 Bin thermostat cable
➋
➊
ICE MACHINE
THERMOSTAT BOX ON BIN
Note: Do not apply
power to ice
machine bin signal
connection! Ice
machine can only
see contact closure.
§ Connect2-pinbinthermostatcableatthermostatboxonbinandatfrontoficemachine.
Bin  •  RIDE Technology  Maestro Plus
9
6. Transport tube installation
Incorrecticetransporttubeinstallationcanresultinweticeanddispensingproblems.Followguidelinesbelow
toensurecorrectinstallation.Callfactoryforassistanceifyouareunabletomeettheserequirements.
6.1 General requirements
§ Maximumlengthoftuberun–20ft(6m).Factoryapprovalrequiredforlongerruns.
§ Runtubewithoutdips.
§ Onecontinuouslengthoftube;nosplices.
§ Minimumradiusofbendsintube–6"(15.3cm)insideradius.
§ Maximumnumberofbends–6.
§ Insulationonentirerunoficetube.
6.2 Procedure
1. Installsuppliedinsulationonentirelengthoftube.
2. Atshuttleactuator,pullinsulationbackfromtransporttubeandslipsuppliedhoseclampoverendof
transporttube.
3. Heatendoftransporttubeincupof160F(71C)hotwatertosoften➊andspreadwithpliers➋
beforemakingconnectiontoeaseassembly.
4. Pushtransporttubeontoshuttleactuatornozzle
➌
.
5. Positionclampbehindliponshuttleactuatornozzleandtightenclamp.
6. Runinsulatedtubewithoutdipsbetweenshuttleactuatoronbinandicemachineandsecureinplace.
7. Removeicemachinetoppanel.
8. Selectside,rearortopknockoutinicemachinecabinetfortubeentranceandinstallbushing.
9. Slideendoftransporttubeandinsulationthroughbushinginicemachineandruntonozzle.
10. Cuttubetothatlength.
11. Pullinsulationbackandslipsuppliedhoseclampoverendoftransporttube.
12. Heatendoftransporttubeincupof160F(71C)hotwatertosoften
➊andspreadwithpliers➋
beforemakingconnectiontoeaseassembly.
13. Pushtransporttubeontonozzle
➍
.
14. Positionclampbehindliponnozzleandtightenclamp.
install insulation on full run of tube
Evaporator
install clamp behind lip
on nozzle
bushing
➌
➍
Heat end of transport tube in cup of 160 F
(71 C) hot water to soften (1) and spread with
pliers before making connection (2).
➋
➊
SHUTTLE
ACTUATOR
10
Maestro Plus Bin  •  RIDE Technology
7. RIDE model ice machine start up procedure
Thestart-upprocedurebelowisintendedtoensurethaticemachineisoperatingproperlyafterinstallationhas
beenmade.Checkeachitemlistedandcallfactoryimmediatelyforassistanceifyouexperienceproblemswith
unit.
NOTICE!
§ IcemachineMUSTbesanitizedpriortooperation!
§ ConsultOperationandServiceManualprovidedwithicemachineforsanitizinginstructions.
7.1 Before turning on power
1. Turnonwatertoicemachine.
2. Checkthathoseclampsecurelyholdsicetransporttubeonnozzle.
7.2 After turning on power
1. Turnonpowertoicemachineandconrmthatgearmotor,fanmotorandcompressorstartimmediately.
2. Checkthaticebeginstoenterbinareawithinapproximately10minutes.
3. Puticeagainstbinlevelthermostatindispenserbinandcheckthatcompressorandgearmotorshut
downimmediatelyafterthermostatopens.Fanwillcontinuetorunforanadditional10minutes.
4. Checkthaticemachinecomesbackoninapproximately20minutes(binsignalmustbepresent).
Bin  •  RIDE Technology  Maestro Plus
11
01062579R02
© Follett LLC 3/17
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Maestro Plus and Harmony are trademarks of Follett LLC.
Follett, Chewblet and RIDE are registered trademarks of Follett LLC, registered in the US.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Follett Maestro Plus MMC425W BS Installation Instructions Manual

Follett
Brand
Follett
Model
Maestro Plus MMC425W BS
Type
Installation Instructions Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents