Moneual 972 User manual

Brand: Moneual

Model: 972

Type: User manual

Moneual 972

User Guide

Please read the following safety information carefully before starting the system.

AC Power Safety Warning

The power supply is pre-set for the country/region in which you purchase the system. If you

move to another country/region, please make sure you check its voltage requirements before

plugging the system into an AC power outlet.

We recommend you use a power surge device. Do not use an extension cord.

For your safety, the power cord provided with your system has a ground plug. Always use the

power cord with a properly grounded wall outlet to avoid the risk of electrical shock.

Checking the Voltage Selection

CAUTION

Setting the voltage selection switch on the wrong voltage may damage the system.

Make sure this switch is set correctly for your location before turning the system on.

A power supply is integrated into the system to provide power to the system. The power

selection switch on the system rear panel can be used to set the power supply to operate at

115V or 230V. Slide the voltage selection switch to the correct voltage position:

• North America typically uses 115V.

• Europe typically uses 230V.

To verify that the system has the correct setting for your environment, check the voltage

selection.

BEFORE YOU BEGIN

Moneual 972 User Guide 32

115V

230V

115V

BEFORE YOU BEGIN

AC Power Safety Warning

Checking the Voltage Selection

ELECTRICAL SAFETY

Operation Safety

Conventions Used in this Manual

BOX CONTENTS

GETTING FAMILIAR WITH THE SYSTEM

Front Panel

Back Panel

SETTING UP THE SYSTEM

Checklist to Set up the System

1. Select the Correct Voltage Selection for Your Area

AC Power Safety warning

Checking the Voltage Selection

2. Set the System in a Well Ventilated Area

3. Connect Video Output

4. Connect Wireless Keyboard

5. Connect Audio

Option 1: 5.1 Analog Audio Connection

Option 2: 7.1 Analog Audio Connection

Option 3: 2-Channel Audio Connection

6. Connect to Internet

7. Connect Power

8. Verify Audio Settings with Realtek HD Audio Manger

9. Connect TV Input

10. Data Loss Disclaimer

11. Limited Warranties

TABLE OF CONTENTS

CAUTION

Proper ventilation is required to keep the system from overheating. Do not block

system vents or place devices directly on top of the system. If placed in a cabinet,

make sure that there is enough ventilation space behind and in front of the system.

Place the system at the bottom of the cabinet.

To prevent electrical shock, disconnect the power cord from the electrical outlet before

relocating the system.

If the power supply is broken, please consult a qualified service technician or your retailer

to avoid electrical shock hazards.

Operation Safety

Make sure that all chords are intact and correctly connected before using this product. Any

detected damage should be reported to your dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,

sockets, and circuitry.

Avoid dust, humidity, and temperature extremes. Do not place the product in any area

where it may become wet. Place the product on a stable surface.

Contact a qualified service technician or your retailer for any technical problems with the

product.

Slots and openings are provided for ventilation; to ensure reliable operation of the product

and to protect it from overheating. These openings must not be blocked or covered. This

product should never be placed near or over a radiator or heat register.

Conventions Used in this Manual

The Caution box indicates information to prevent damage to

components during the attempt to complete a task.

NOTE The Note sign indicates important information.

* Other names and brands may be claimed as the property of others.

ELECTRICAL SAFETY

Moneual 972 User Guide 54

CAUTION

ᐳᐲᐭ ᐮᐯᐰᐱ ᐴ

Front Panel

GETTING FAMILIAR WITH THE SYSTEM

Name

Item Description Purpose

1 Power Button Turn on / off the system

2 Disc open / close To open or close

3 Display window To display MCE status

4 IEEE 1394 To connect IEEE 1394 devices

5 USB To connect USB devices

6 MIC To connect MIC

7 Headset To connect headset

8 Multimedia card reader To read/write multimedia card

Item

BOX CONTENTS

Moneual 972 System

Wireless keyboard

Remote control with batteries

Driver CD

OS CD

Power Cord

Motherboard Manual

User Guide

Motherboard

Manual

User Guide

AAA

Moneual 972 User Guide 76

Back Panel

Moneual 972 User Guide 98

ᐭᐴ

Item Description Purpose

1 Power Switch To turn on Power Supply

2 AC power connector Power Connector

3 Keyboard To connect a PS/2 keyboard

4 Coaxial S/PDIF To connect an external audio device

5 LAN To connect Local Area Network

6 IEEE 1394 To connect a IEEE 1394 device

7 Cen./Sub. To connect the center and subwoofer in the

5.1-channel or regular 2-channel audio system

8 Line In To connect the line out from external audio sources

9 VGA To connect monitor input

10 Voltage selector Voltage selection switch

11 USB To connect a USB device such as scanner,

digital speaker, mouse, keyboard,

hub, digital camera, joystick etc.

12 Optical S/PDIF To connect an external audio device

13 External SATA port To connect an external SATA hard disk drive

14 S.L./S.R. To connect the side left and side right in the

7.1-channel

15 Mic in To connect to the plug from external microphone

16 R.L./R.R. To connect the rear left and rear right in the

5.1-channel

17 Line Out To connect the front left and front right channel in the

5.1-channel or regular 2-channel audio system

ᐮᐱᐯᐲ

ᐺᐸ

ᐰᐳ

ᐶᐹ

ᐵ

ᐻᐷᐷ ᐷ

Checklist to Set up the System

Use the following checklist as a guide for setting up your system:

[ ] Step 1: Select the correct voltage selection for your area

[ ] Step 2: Place the system in a well ventilated area

[ ] Step 3: Connect video output

[ ] Step 4: Connect wireless keyboard

[ ] Step 5: Connect audio

[ ] Step 6: Connect to Internet

[ ] Step 7: Power on the system

[ ] Step 8: Confirm audio setting

[ ] Step 9: Connect TV Input

1 Select the Correct Voltage Selection for Your Area

AC Power Safety warning

The power supply is pre-set for the country/region in which you purchased the system, If you

move to another country/region, please make sure you check its voltage requirements before

plugging the system into an AC power outlet.

We recommend you use a power surge protector. Do not use an extension cord.

For your safety, the power cord provided with your system has a grounded plug. Always use

the power cord with a properly grounded wall outlet to avoid the risk of electrical shock.

Checking the Voltage Selection

CAUTION

Setting the voltage selection switch on the wrong voltage may damage the system.

Make sure this switch is set correctly for your location before turning the system on.

See Checking the Voltage section for details on how to set the voltage selection to the proper

setting for your area.

2 Place The System in a Well Ventilated Area

The system must be placed about 12in/30cm away from a wall. Do not block system vents

and do not place a device directly on top of the system. If placed in a cabinet, make sure

there is a 3in/8cm ventilation space behind and in front of the system. Place the system at

the bottom of the cabinet.

SETTING UP THE SYSTEM

3 Connect Video Output

The system needs to be connected to a video display device. You can connect either a HDTV

or a PC monitor.

VGA Connection

VGA cable

(not included)

HDMI cable

(not included)

DVI to HDMI adapter

(included)

High-resolution display TV PC Monitor

Moneual 972 User Guide 11

4 Connect Wireless Keyboard

Plug the USB receiver of the wireless keyboard into the USB port at the front or rear panel

of the system. A USB extension cable can be used to connect the USB receiver.

1. Insert the keyboard batteries.

2. Press the connect button on the USB receiver.

3. Press the on/off button on the front side of keyboard.

4. Press the "Connect" key located under the keyboard.

If the keyboard does not work suddenly, press the trackball of the keyboard or reset by

pressing the “Connect” key.

Option 2: 7.1 Analog Audio Connection

Option 3: 2-Channel Audio Connection

5 Connect Audio

This section shows you how to connect the audio system in your home to the HTPC system.

For audio setup, choose one of the options listed below:

•

Option 1: 5.1 Analog Audio Connection

•

Option 2: 7.1 Analog Audio Connection

•

Option 3: 2-Channel Audio Connection

NOTE After setting up the system, use the audio setting application to optimize your

audio settings.

Option 1: 5.1 Analog Audio Connection

Left/right audio cable

(Additional cables not included)

Speakers

7.1 Surround sound receiver

AUDIO INPUTS

FRONT

SUB

CENTER

SURROUND

BACK

Speakers

Left/right audio cable

AUDIO INPUT

AUDIO INPUTS

FRONT

SUB

CENTER

SURROUND

BACK

7.1 Channel

Left/right audio cable

(Additional cables not included)

Moneual 972 User Guide 13

2 Channel

5.1 Channel

Speakers

5.1 Surround sound receiver

URROUN

Slide the voltage selection switch to the correct voltage position.

Do the following to turn on the connected devices:

1. Use the power cord to connect the system to a grounded AC outlet. It is recommended

that you use a power surge protector.

2. Press the Power On button on the front of the system.

3. Press the Power On button on the PC monitor.

4. Press the Power On button on the audio system.

6 Connect to Internet

Ethernet LAN cable

7 Connect Power

CAUTION

Setting the voltage selection switch on the wrong voltage may damage the system.

Make sure this switch is set correctly for your location before turning the system on.

North America typically uses 115V. Europe typically uses 230V.

High-speed Internet modem or home network router

RJ-45 Ethernet cable

(not included)

LAN/USB2.0

Moneual 972 User Guide 15

Power cord

Surge protector

(recommended)

115V

230V

115V

8 Verify Audio Settings with Realtek HD Audio Manager

Realtek HD Audio Manager is a conversion and refinement tool that affects all audio in the

system regardless of application.

To configure Realtek HD Audio Manager Settings:

1. Go to ‘Control Panel ► Hardware and Sound ►’

2. Select ‘Sound’

ᐭ

3. For HDMI audio setting, select ‘Digital Output Device(HDMI)’ then click ‘Set Default’

ᐯ

Moneual 972 User Guide 17

ᐮ

Coaxial cable (Cable TV Provider)

CableCARD

(not included)

Coaxial cable

(Antenna)

9 Connect TV Input

This section shows you how to connect TV input to the HTPC system.

NOTE

Please contact your Cable TV provider regarding CableCARD.

10 Data Loss Disclaimer

Before sending the system out for service, be sure to backup all data and remove all

third party software.

With respect to all service provided, it is your responsibility to backup the contents of your

system, including any data you have stored or software you have installed. It is likely that the

contents of your PC will be lost in the course of service and we will not be responsible for any

damage to or loss of any programs, data or other information stored on any part of any

product serviced hereunder.

IF DURING THE REPAIR OF THE PRODUCT THE CONTENTS OF THE PC ARE ALTERED,

DELETED, OR IN ANY WAY MODIFIED, WE WILL NOT BE HELD RESPONSIBLE. YOUR PRODUCT

WILL BE RETURNED TO YOU CONFIGURED AS ORIGINALLY PURCHASED (SUBJECT TO AVAIL-

ABILITY OF SOFTWARE).

Be sure to remove all third party hardware, software, features, parts, options, alterations, and

attachments not warranted by us prior to sending the product to us for service. We are not

liable for any loss or damage to these items.

11 Limited Warranties

Moneual Lab-branded hardware products purchased in the U.S. come with a 1-year limited

warranty. This limited warranty covers defects in materials and workmanship in hardware

products.

The span of one year for this limited warranty starts on the date of purchase. A receipt

indicating the date of purchase will be required to receive warranty services during this time.

Moneual Lab may change the availability of limited warranties at its discretion, but changes

will not be retroactive.

Contact

Customer Service [email protected]

1-877-450-0105

Moneual 972 User Guide

Moneual 972 User manual

Moneual 972 User manual

Related papers

Other documents