2. Newland
  3. EM3000
EM3000

Newland EM3000 User guide

  • Hello! I am an AI chatbot trained to assist you with the Newland EM3000 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the power requirement of Newland EM3000?
    What is the output current of the power adapter of Newland EM3000?
    How to connect Newland EM3000 to a PC?
    What is the purpose of the trigger button on Newland EM3000?
    What is the purpose of the reset button on Newland EM3000?
    What is the purpose of the LED indicator on Newland EM3000?
    What is the purpose of the buzzer on Newland EM3000?
SCANNING MADE SIMPLE
EVK3000V2
EVK board
user guide
Version Description Date
V
2.0.0 Support EM3000V3.4, EM3000V2, M3000V6 and EM1300. 2011-09-28
Revisions
Content
EVK3000V2 Hardware Specification
EVK3000V2 Outline Dimensions .............................................................................................
1
EVK3000V2 Parts Distribution .................................................................................................
2
EVK3000V2 Part Specification .................................................................................................
3
Definitions of J1 Pins (for connection of EM3000V3.4) ....................................................
6
Definitions of J3 Pins (for connection of EM3000V2/V6) .................................................
7
Definitions of J5 Pins (for connection of EM1300) ............................................................
8
EVK3000V2 USB Cable .....................................................................................................
9
EVK3000V2 RS232 Cable ...............................................................................................
10
EVK3000V2 Circuit Diagram .................................................................................................
12
EVK3000V2 Use Instructions
Components of EVK3000V2 Developing Package .................................................................
13
EVK3000V2 Working Sketch Map .........................................................................................
14
EVK3000V2 Block Diagram ...................................................................................................
14
EVK3000V2 Hardware Installation Process ...........................................................................
15
EVK3000V2 Software Installation Process ............................................................................
16
EVK3000V2 Test Instructions ................................................................................................
19
Page 1
EVK3000V2 Hardware Specification
EVK3000V2 Outline Dimensions
25mm
10mm
25mm
34.7m
10.7m
77.5mm
66.8mm
80mm
Φ=2mm
Φ=3mm
1.5mm
1.5mm
60mm
The Face of EVK3000Figure 1.
The Side of EVK3000Figure 2.
The Fix Hole Position of EVK3000Figure 3.
Page 2
EVK3000V2 Hardware Specification
EVK3000V2 Parts Distribution
Reset
EM3000V2 Engine
Buzzer
Trigger
USB Port Jack
RS232 Port Jack
Connecting Jack for EM1300
Connecting Jack
for EM3000 V3.4
Connecting Jack
for EM3000 V
2/V6
Page 3
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
Page 4
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
Page 5
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
PIN1
J3
J1
J5
PINs on EVK3000V2
Page 6
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
Definitions of J1 Pins (for connection of EM3000V3.4)
Pin Signal Function
Pin 1 N/C -
Pin2 VCC Power,
+3.3V
Pin 3 GND Power Ground
Pin 4 RXD Serial Port Data Receiving, T
TL
Pin 5 TXD Serial Port Data Tr
ansmission, TTL
Pin 6 N/C -
Pin 7 N/C -
Pin 8 N/C -
Pin 9 BUZ Beeper output. If no sufficient current for beeper,
extra driving circuit is required.
Pin 10 LED
LED indicator output. If no sufficient current for LED, extra driving circuit is
required.
Pin 11 RESET
Reset s
ignal. When the low level input lasts for 100 μs or longer, EM 3000
V3.4
will be reset.
Pin 12 TRIG
Tr
iger signal, When the low level input lasts for 20 ms or longer, the reading will
be triggered.
Page 7
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
Definitions of J3 Pins (for connection of EM3000V2/V6)
Pin Signal Function
PIN 1 TRIG
Trigger for reading. When the output of low level lasts for 20 ms or longer, the
reading will be triggered.
PIN 2 RESET
Reset signal input. When the output of low level lasts for 100 μs or longer, EM
3000 will be reset. If out of use, the pin should be suspended.
PIN 3 LED
LED indicator output. When LED indicator need be used, extra driving circuit is
required. If out of use, the pin shoud be suspended.
PIN 4 BUZ Beeper output. If no sufficient current for beeper,
extra driving circuit is required.
PIN 5 GND -
PIN 6 NC -
PIN 7 NC -
PIN 8 TX TTL, cannot be connected with the serial port data from computers directly.
PIN 9 RX TTL, cannot be connected with the serial port data from computers directly.
PIN 10 GND -
PIN 11 VCC
Power, +3.3V. If the power drops below 3.1V suddenly, EM3000
V2/V6
will be
reset automatically.
PIN 12 VCC
Power, +3.3V. If the power drops below 3.1V suddenly, EM3000
V2/V6
will be
reset automatically.
Page 8
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
Definitions of J5 Pins (for connection of EM1300)
Pin Signal Function
Pin 1 Flash_DOWN
Program Download. Under low level, the system will come into dowload
mode; under high level, the system will come into running mode. If no need
for this function, the pin should be suspended.
Pin 2 VCC Power,
+3.3V
Pin 3 GND Power Ground
Pin 4 RXD Serial Port Data Receiving, T
TL
Pin 5 TXD Serial Port Data Tr
ansmission, TTL
Pin 6 CTS Reserved
Pin 7 RT
S Reserved
Pin 8 N/C -
Pin 9 BEEP
Beeper o
utput. If no sufficient current for beeper, extra driving circuit is re-
quired.
Pin 10 DLED
LED indicator output. When LED indicator need be used, extra driving
circuit is required. If out of use, the pin shoud be suspended.
Pin 11 N/C -
Pin 12 TRIG
Tr
igger. When the voltage of this pin is under low level, the engine will start
to read and decode barcodes.
Page 9
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
EVK3000V2 USB Cable
USB Port (B Type) USB Port (A Type)
USB Port (A Ty
pe)
»
1
2
3
4
NUM TYPE DESC
1 VBUS +5V
DC
2 D-
3 D+
4 GND GND
USB Port (B Type)
»
1 2
34
Page 10
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
1
2
3
4
5
6
7
8
VEXT
1
6
2
7
3
8
4
9
5
GND
JP1
RJ45
J2
DB9
EVK3000V2 RS232 Cable
RJ45 Port
»
8
1
PIN TYPE DESC
1 VDD +5.6V
DC
2 VDD +5.6V
DC
3 Input RXD(RS232)
4 Ouput TXD(RS232)
5 NC
6 NC
7 GND GND
8 NC NULL
DB9 Port
»
1
6
2
7
3
8
4
9
5
J2
DB9
GND
VDD
RXD
TXD
PIN TYPE DESC
1 NC
2 Input RXD(RS232)
3 Output TXD(RS232)
4 NC
5 GND GND
6 NC
7 NC
8 NC
9 VDD +5.6V
DC
Page 11
EVK3000V2 Hardware Specification
EVK3000V2 Part Specification
Power Adapter
»
AC220V
DC 5.6V
Parameters of Power Adapter (Rated Input and Output)
Input Voltage AC220V，50／60Hz
Output Current 0.35 A
Output Vo
ltage 5.6V
Page 12
EVK3000V2 Hardware Specification
EVK3000V2 Circuit Diagram
1 2 3
4 65
A
B
C
D
6
54321
D
C
B
A
V2
EVK
1/140/90/8002
GND
L1
BGL3216A190H
1
2
3
4
5
6
7
8
J2
RJ45-8
VIN
PGND
-RXD0L
-TXD0L
C10
300p
C9
300p
+
C5
100nF
+
C6
100nF
C1
100nF
GND
-TXD1
-RXD1
VCC
16
C1+
1
C1-
3
C2+
4
C2-
5
T1IN
11
R1OUT
12
GND
15
R1IN
13
T1OUT
14
V+
2
V-
6
R2IN
8
R2OUT
9
T2OUT
7
T2IN
10
U1
SP3232ECA
C3
100nF
C2
100nF
GND
GND
L2
0.47u
L3
0.47u
GND
-RXD0L
-TXD0L
1
T3
-TXD
1
T10-RXD
TXD
RXD
VCC_3.3V
D3
1N5819HW
TRIG
LED
GND
VCC_3.3V
D1
LED
R1
680R
GND
K1
GND
GND
K2
R2
10R
Q1
2SC1623
R6
100K
R5
4.7K
VCC_3.3V
1
T11
/RESET
1
2
3
4
5
6
7
8
9
10
11
12
J6
12PIN
PWRDWN
RTS
CTS
TXD
RXD
TRIG
BUZ
LED
/RESET
GND
CE
1
GND
2
NC
3
VDD
4
VOUT
5
U3
R1170H331B
+
C12
10u/10V/TANTA
GND
+
C13
10u/10V/TANTA
C4
100nF
VIN
1
T2
1
T1
R17
10K
VCC_3.3V
TXD
RXD
C8
100nF
R8
4.7K
GND
GND
D-
D+
R14
10K
+
C11
3.3uF/TANTA
GND
VCC_3.3V
REGIN
7
VDD
6
GND
3
VBUS
8
D-
5
D+
4
RST
9
SUSPEND
12
SUSPEND
11
RI
2
DCD
1
DTR
28
DSR
27
TXD
26
RXD
25
RTS
24
CTS
23
NC
10
NC
13
NC
14
NC
15
NC
16
NC
17
NC
18
NC
19
NC
20
NC
21
NC
22
U2 CP2102
+
C7
10u/10V/TANTA
VIN
1 2
147
U4A
7407
34
U4B
7407
5 6
U4C
7407
R19
10K
R18
10K
VCC_3.3V
VIN
GND VCC_3.3V
1
2
3
4
J3
USB_CON
D-
D+
PGND
VIN
R9
0R
R10
0R
B1
AS903Q
1
23
Q2
718
Q3
2SC1623
D2
1N4148
R7
100K
R15
1K
VIN
GND
R3
10R
R4
10R
C14
10nF
BUZ
EM3000V3.4,EM3000V2,EM3000V6
&EM1300
Document No.
Wr
itten By:
Revised By:
Applicable
Model:
Document
Name:
Date:
H a r d wa r e
Version:
Page:
Page 13
EVK3000V2 Use Instructions
Components of EVK3000V2 Developing Package
No. Component Type Quantity Remark
1 Reading Engine As Ordered
2 EVK3000V2 EM3000V2_EVK1.0 1 Standard
3 Flexible Cable 1 Standard
4 USB Cable USB 1.0 1 Standard
5 Screw 2 Standard
6 RS232 Cable 1 Optional
7 Power A
dapter Output DC 5.6V 1 Optional
Page 14
EVK3000V2 Use Instructions
EVK3000V2 Working Sketch Map
EVK3000V2 Board
EVK3000V2 Block Diagram
SPS3232
Series
Port
EVK3000V2 Board
Engine
USB
Port
CP2102
RS232
RXD_TTL
USB
TXD_TTL
Page 15
EVK3000V2 Use Instructions
EVK3000V2 Hardware Installation Process
1. Fix the engine on EVK3000V2
2. Connect the engine and EVK3000V2 with flexible cable
3. Connect EVK3000V2 to PC
If USB connection is adopted, please follow the below steps:
Install the USB driver through the ancillary CD
»
Connect EVK3000V2 to the USB port on the PC via USB cable
»
When EVK3000V2 is electrified, the red indicator on EVK3000V2 will be lighted and an
»
indicating sound like "Didi" will be heard, which means EVK3000V2 is in working state.
Press the trigger and start to read barcodes.
»
If RS232 connection is adopted, please follow the below steps:
Connect EVK3000V2 to the serial port on the PC
»
Connect RS232 cable and the power adapter
»
Insert the power adapter into the AC outlet
»
When EVK3000V2 is electrified, the red indicator on EVK3000V2 will be lighted and an
»
indicating sound like "Didi" will be heard, which means EVK3000V2 is in working state.
Press the trigger and start to read barcodes
»
Page 16
EVK3000V2 Use Instructions
EVK3000V2 Software Installation Process
1. Install the USB driver
2. Install and operate Quickset
3. Connect the device
When the RS232 connection is choosed:
Click PC COMM Setup(C)…, pop-up COM SETUP dialog box, select COM;
»
Set the parameter, COM=COM3 Baud Rate= 9600 click OK button;
»
Click Auto Detect button，the status bar will show the information of finding device.
»
Page 17
EVK3000V2 Use Instructions
EVK3000V2 Software Installation Process
Page is loading ...
Page is loading ...
Page is loading ...
/