Miglia DIVA 2.1 Owner's manual

Type
Owner's manual
Diva 2.1
User Guide
Guide d’installation
Revision 1.2
(c) 2006, Miglia Technology
Page 1
Preface
Thank you for choosing Diva 2.1 from Miglia Technology. Diva 2.1 is a set of speakers
designed for your Mac, PC or MP3 player.
System Requirements:
Computer with sound card and audio out connector
MP3 player
Package Contents:
1x Diva 2.1 woofer
2x speaker satellites
1x universal power supply
1x audio cable
1x Registration card
Préface
Merci d’avoir choisi Diva 2.1 de Miglia Technology. Diva 2.1 est un système de haut-
parleurs pour Mac, PC et tout baladeur MP3
Configuration requise
Ordinateur avec carte son et sortie audio
Baladeur MP3
Contenus de l’emballage
1x Caisson de basse Diva 2.1
2x haut-parleurs satellites
1x alimentation externe universelle
1x câble audio
1x carte d’enregistrement
Page 2
I. Connecting Diva 2.1
1. Connect the two satellites to the woofer unit.
Connectez les deux satellites au caisson de basse.
2. Connect the power supply to the woofer unit. Then connect the power supply
to a power outlet
Connectez l’alimentation au caisson de basse. Ensuite connectez
l’alimentation à une prise électrique
Page 3
3. Connect the audio cable to the audio input of Diva 2.1
Connectez le câble audio à l’entrée audio de Diva 2.1
4. Connect the audio cable to the headphone socket of your computer or iPod.
Connectez le câble audio à la sortie casque de votre ordinateur ou iPod.
5. The installation of Diva 2.1 is now complete
L’installation de Diva 2.1 est maintenant terminée.
Page 4
II. Using Diva 2.1
Utilisation de Diva 2.1
1. To power Diva 2.1 ON and OFF, hold down the “Volume +” and “Volume -” keys
simultaneously.
Pour allumer et éteindre Diva 2.1, veuillez maintenir les touches “Volume +” et
“Volume -” enfoncées simultanément.
2. The audio volume is controlled by the keys on the satellite.
Le volume audio est contrôlé par les touches sur le satellite.
ON/OFF
Page 5
III. Technical Support
Should you have any question regarding Diva 2.1, please do not hesitate to contact our
technical support services. To contact Miglia Technology Ltd's Technical Support, please
use the appropriate Technical Support Case form found under
http://www.miglia.com/Support
Before contacting technical support, please review the available FAQ’s (Frequently
Asked Questions) available in the technical support section of our website.
Miglia Technology Contact Details:
Miglia Technology USA
3501 Silverside Road
206 Naamans Building
Wilmington, DE
19810
USA
Technical Suport: E-mail: http://www.miglia.com/Support
Technical Support form are available on the page above
Tel: (866) 553 9425
Miglia Technology Europe
The Old Silk Mill
Brook Street
Tring
HP23 5EF
United Kingdom
Technical Support: E-mail: http://www.miglia.com/Support
Technical Support form are available on the page above
Tel: +44 (0) 906 753 0267
Calls are charged £0.75/min
Miglia Technology Asia
5F-B, No. 447 Sec. 3
Wen-Shin Road
Taichung
Taiwan
406
Technical Support: E-mail: http://www.miglia.com/Support
Technical Support form are available on the page above
Tel: +44 (0) 906 753 0267
Calls are charged £0.75/min
Page 6
IV. Warranty Agreement
Miglia Technology warrants your hardware product against any defect in material and
workmanship, under normal use, for the designated warranty period. The warranty
becomes effective from the date of purchase by the end user.
If the product is found to be defective within the warranty period, Miglia Technology
Ltd will, at its sole option, repair or replace the defective product.
Miglia Technology Ltd will not, under any circumstances, be liable for direct, special or
consequential damages such as, but not limited to, damage or loss of property or
equipment, loss of profits or revenues, cost of replacement goods, or expense or incon-
venience caused by service interruptions.
This warranty is void if:
The product was operated or stored in abnormal use or maintenance conditions.
The product was repaired, modified or altered or undergone attempted repair by
non-authorised personel, unless Miglia Technology Ltd has authorised such repair,
modification or alteration.
The product was damaged, abused or misused
The product was installed without following the supplied installation instructions.
The serial number of the product is defaced, modified or missing.
The “Warranty Void” seal on the casing has been modified, removed or broken.
The decision of Miglia Technology shall be final and binding with regards to the condi-
tion of product return and eligibility of repair or replacement.
How to obtain warranty service:
To obtain warranty service, within 30 days of the date of purchase, please contact the
retailer from whom you made your purchase. To obtain warranty service, after 30 days
of the date of purchase contact Miglia Technology Ltd’s Technical Support Service. A
proof of purchase will be required to confirm that the product is still under warranty.
Should Miglia Technology Ltd’s Technical Support diagnose a fault on your product, a
Return to Manufacturer Authorisation (RMA) number will be issued to you.
All products returned to Miglia Technology Ltd must be securely packaged in their
original box and shipped at the customer’s cost inclusive of any requested documenta-
tion. Return shipment of repaired or replaced product will be covered by Miglia
Technology Ltd.
Any product returned without an RMA number issued by Miglia Technology Ltd’s
Technical Support Service will be refused.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Miglia DIVA 2.1 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages