Note: For advanced connections, please see pages 15-19 of the User’s Guide
...OR...
2
Connect
1 Connect the unit to your TV and antenna/cable as shown.
2 Turn on the DVD Recorder+VCR.
3 Turn on your TV and set it to channel 3.
1 Press SETUP.
2 Select “Tuning Band”, and choose:
• “
TV” if you are using a standard antenna to receive channels.
• “CATV” if you are using basic cable to receive channels.
3 Select “Start”:
• The unit scans for all available channels and stores them in memory. This may take several
minutes. When scanning is complete, the DVD Recorder+VCR tunes to the lowest channel found.
1 Press SETUP.
2 Select “Clock Set” > “Manual”.
3 Use the / buttons to move and the
/ buttons to set the Date, Year, & Time.
4 When you are finished, press ENTER.
5 Press SETUP to exit.
DVD Recorder + VCR
Remote ControlAudio/Video Cables
RF (Coax) Cable
Registration Card & User’s Guide
Blank Disc2 AAA Batteries
1 Connect the unit to your TV and cable box/satellite receiver as
shown.
2 Turn on your TV and set it to channel 3.
3 Turn on the DVD Recorder+VCR and set it to channel 3.
4 Turn on your Cable Box/Satellite Receiver.
About Antenna/Basic Cable Setup
You don’t need to set the clock (because it’s done automatically whenever
you turn off the unit), however you do need to search for channels:
S-VIDEO OUT
DIGITAL
AUDIO OUT
OPTICAL
DVD + VCR OUT
R
L
R
L
R
L
VIDEO
Pr
Pb
Y
COMPONENT/
PROGRESSIVE
VIDEO OUT
AV
OUT
AUDIO
OUT
AV 1
IN
VIDEO
DIGITAL
AUDIO OUT
COAXIAL
IN
(FROM
ANT.)
OUT
(TO TV)
RF
Antenna/Cable
Wall Outlet
About Cable Box/Satellite Receiver Setup
You don’t need to search for channels (because you select channels on
your cable box or satellite receiver), but you do need to set the clock:
S-VIDEO OUT
DIGITAL
AUDIO OUT
OPTICAL
DVD + VCR OUT
R
L
R
L
R
L
VIDEO
Pr
Pb
Y
COMPONENT/
PROGRESSIVE
VIDEO OUT
AV
OUT
AUDIO
OUT
AV 1
IN
VIDEO
DIGITAL
AUDIO OUT
COAXIAL
IN
(FROM
ANT.)
OUT
(TO TV)
RF
Cable Box/
Satellite Receiver
Antenna/Cable
Wall Outlet
IN OUT
AUDIO
S-VIDEOVIDEO
L
R
OUTPUT
RF
Do you have an
Antenna or
Basic Cable?
Do you have a
Cable Box or
Satellite Receiver?
Follow the instructions
on this panel.
Follow the instructions
on this panel.
Use this cable in step 2
Quick Start
Welcome to the VR3845 Quick Start Guide—the
fastest way to get started using your DVD
Recorder+VCR. Just follow these easy steps,
from unpacking and setting up to making your
first recording.
If for some reason you need additional help,
please make sure you have followed every step
in this Quick Start and have referred to the
User’s Guide before calling customer service.
VR3845
DVD Recorder + VCR
Unpack
1
Prev Move Select
AM
Time
12
Year
2005
00
Date
01 01
/
:
Manual
Auto
Tuning Band
CH. Add/Del
Clock Set
Display Mode
TV Aspect
Progressive Scan
PBC
Factory Set
Power Save Mode
Tuning Band
CH. Add/Del
Clock Set
Display Mode
TV Aspect
Progressive Scan
PBC
Factory Set
TV
CATV
Power Save Mode
START
Prev
Tuning Band
CH. Add/Del
Clock Set
Display Mode
TV Aspect
Progressive Scan
PBC
Factory Set
TV
CATV
Power Save Mode
11%Searching
Stop
Tuning Band
CH. Add/Del
Clock Set
Display Mode
TV Aspect
Progressive Scan
PBC
Factory Set
Power Save Mode
Prev
Copy a VHS Tape to DVD
1 Load your source tape in the VCR deck.
2 Load a blank recordable disc in the disc tray.
3 Press the VCR button to switch to VCR mode.
4 Press COPY to display the “Copy to DVD” menu.
5 Select “Copy” and press ENTER.
• The DVD Recorder will start copying the VHS tape to
the DVD-R disc.
6 To stop copying, press the STOP button.
• If the the VHS tape ends, copying will stop
automatically.
To archive a VHS tape to DVD:
Other Cool Features
(800) 736-7679
If you would like personal
assistance making your first
recording, call us and we'll walk
you through it. Free.
3
Record TV
Make Your First
DVD Recording
Finalize Your Disc So it Plays
on Other DVD Players
If you want your recorded discs to be compatible with
other DVD players, you will need to “finalize” them:
1 Press SETUP.
2 Select “DISC” > “Finalize”.
3 Select “Finalize”, then press ENTER.
4 Select “Yes” to confirm, then press ENTER.
• Disc finalization may take a few minutes to complete.
• The disc will now play on most DVD players.
• You can erase and reuse a DVD-RW by selecting “Unfinalize”
(or selecting “Initialize” to erase a DVD+RW). However,
once you finalize a DVD-R or DVD+R you cannot record
anything else on the disc.
Initialize
Finalize
Disc Label
Disc Protect
Unfinalize
Finalize
AutoPlay
YourDVD
Prev
Follow these steps to make your first DVD recording using the supplied disc:
1 Open the disc tray and load the supplied DVD-RW disc.
2 Choose whether to initialize the DVD-RW in “VR mode” or “Video mode”:
• Choose “VR mode” for maximum editing options, or “Video mode” for
maximum compatibility with other DVD players.
• Blank DVD-R, DVD+R, and DVD+RW discs are initialized in “Video
mode”.
3 When initialization is complete, press CH/ to select the channel you
wish to record.
• If using a cable box or satellite receiver, set the DVD recorder to
Channel 3 and select the desired channel on your box/receiver.
4 Press REC to start recording.
5 When recording is complete, press STOP.
• The DVD Recorder stops recording and adds the new title to the disc
menu.
6 To watch your recorded show, press DISC MENU, select the thumbnail of
the desired title, and press PLAY
.
4
Finalize Disc
©2005 GoVideo. All rights reserved. Printed in Korea. “Dolby”, “Pro Logic”, and the double D symbol are trademarks of Dolby Laboratories.
All other brand and product names are trademarks or registered trademarks of their respective companies.
Record from Camcorder
1 Connect your camcorder to the front panel A/V jacks as
shown.
• Choose RCA cables or DV cable, whichever your camera
supports.
2 Press INPUT repeatedly to select “AV2” (for the front
Audio/Video or S-Video Input) or DV (for the DV Input).
3 Cue the camcorder to the start of the scene you wish to
record.
4 Load a recordable disc.
5 Press REC to start recording.
• Recording continues until you press STOP
or the disc is
full.
6 Press STOP to stop recording.
To record your home movies direct to DVD:
DVD Recorder+VCR
DV Digital Camcorder
VHS/Hi8 Camcorder
DV
IN/OUT
Copy
Free Space
Rec. Mode
Copy to DVD
01H54M
SP
Stop
customerservice@govideo.com
800.736.7679
www.govideo.com
Do you want finalization?
Proceed?
Yes No
-
1
-
2
GoVideo VR3845 Quick Start
- Type
- Quick Start
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Go-Video VR4940 User manual
-
Go-Video VR4940 User manual
-
LG XBR342 User manual
-
Zenith XBR413 - DVD Player/Recorder And VCR Combo Owner's manual
-
-
Sanyo DRW-1000 Quick start guide
-
LG Electronics XBR446 User manual
-
Go-Video VR3840 User manual
-
Go-Video VR3845 User manual
-
