Sanyo DRW-1000 Quick start guide

Brand: Sanyo

Model: DRW-1000

Type: Quick start guide

If you load a completely blank DVD-RW disc, Disc initialize menu will appear, to select a

desired Recording Mode to initialize the disc.

a Press SETUP.

The Setup menu appears.

b Use v / V to select the DISC option.

c While the DISC option is selected, press B to

move to the second level.

d Use v / V to select the DISC Initialize option.

e Press B to move to the third level.

Start icon is highlighted.

f Press ENTER.

Disc Initialize menu appears.

g Use b / B to select a desired DISC Initialize

Mode (VR Mode or Video Mode), then press

ENTER.

h Use b / B to select OK, and press ENTER.

It takes a few moments to initialize the disc.

i Press ENTER.

If you want your recorded discs to be compatible with other DVD players, you MUST

finalize them:

Press SETUP on the remote control.

Use the

buttons to select DISC option,

then press

Use the

buttons to select DISC Finalize

option, then press

Use the

buttons to select “Finalize”,

then press ENTER.

Use the

buttons to select “OK”, then

press ENTER.

Disc Finalization may take a few minutes to com-

plete.

f Press ENTER.

a Connect the “Antenna” or “Cable TV”

to the “ANT. IN” jack on the

VCR/DVD Recorder using a coaxial

RF cable.

b Connect the RF.OUT jack on the

VCR/DVD Recorder to the Antenna

Input jack on the TV using the RF

Cable supplied.

And/Or

Connect the “A/V OUT” jacks on the

VCR/DVD Recorder to the “VIDEO

IN” and “AUDIO IN” jacks on the TV

using the supplied video and audio

cables.

c Turn the TV on and select the video

input source connected to the

VCR/DVD Recorder.

RF Connection: Tune the TV to chan-

nel 3 or 4.

Audio/Video Connection: Tune the TV

to the video input.

a Connect the AV 1 IN jacks on the

rear panel or AV INPUT jacks on the

front panel to the Audio/Video out

jacks on your external component

using optional audio/video cables.

b Use a DV cable (not supplied) to

connect the DV in/out jack of your

DV camcorder/video deck to the front

panel DV IN jack of this VCR/DVD

Recorder.

Note: See the Instruction Manual for advanced connections.

STEP 4 Initialize & Finalize

STEP 1 Connection

QQuuiicckk ssttaarrtt gguuiiddee

DRW-1000

Connecting VCR/DVD Recorder

Connecting Optional Equipment

Video Mode

Select a mode.

Disc Initialize

VR Mode

Remain : 01 M 30 S

Disc Initialize

Initialization is completed.

Disc Initialize

Disc Finalize

Start

DISC Initialize

DISC Finalize

DISC Name

DISC Protect

Prev.

Select

DISC Initialize

DISC Finalize

DISC Name

DISC Protect

Unfinalize

Finalize

Prev.

Select

Do you want to finalize the disc?

Finalize

Cancel

Remain : 02 M 30 S

Finalize

Finalization complete.

Finalize

Printed in Korea

P/N:(8)3840R-Q003X-(1E1/04)

Follow these instructions to scan for channels if you are using an antenna or basic

cable TV connection.

a Press SETUP.

The Setup menu appears.

b Use

to select the GENERAL option.

c Press

to move to the second level.

d Use

to select the Auto Channel Set option.

e Press

to highlight Start, then press ENTER to begin

the channel search.

The tuner will automatically cycle through all available

channels in the area and place them in the tuner’s

memory.

NOTE : To add or erase channels from memory, see the

Instruction Manual for details.

Recordable Discs

DVD-RW Recording Formats

Record Modes

Follow these steps to make your first DVD Recording.

a Load a recordable DVD-R or DVD-RW into the

disc tray.

• If you are using a blank DVD-R disc, the disc

will initialize automatically in Video Mode.

• If you are using a blank DVD-RW disc, the

“Disc Initialize” menu appears, prompting you

to select a mode.

Use the b / B buttons to select VR Mode or

Video Mode, then press ENTER. Disc initial-

ization may take a few minutes to complete.

b Set the Recording Mode.

• Press REC MODE to set the Record Mode to

XP, SP, or LP.

• The amount of free space on the disc appears

on the on-screen display.

c Set the recording source.

• Use the CH/TRK v / V buttons to select the

channel you want to record.

• If you are recording from a camcorder or other

external device, press INPUT to select AV1

(rear audio/video input), AV2 (front

audio/video input), or DV (front DV IN input).

d Start recording.

• Press REC to start recording.

e Pause/Stop recording.

• Press PAUSE/STILL (X) to pause recording.

Press PAUSE/STILL (X) again or REC (z) to

continue the recording.

• When recording is complete, press STOP (x).

A message appears for a few moments while

the VCR/DVD Recorder stops recording and

adds the new title to the disc menu.

• Press DISC MENU/LIST to view the contents

of your recorded disc.

STEP 2 Channel Setup STEP 3 DVD Recording

Auto Channel Scan

Tuning Band

Auto Channel Set

CH. Add/Del

Clock

TV Aspect Ratio

Progressive Scan

Factory Setting

Prev.

Select

CATV

Tuning Band

Auto Channel Set

CH. Add/Del

Clock

TV Aspect Ratio

Progressive Scan

Factory Setting

11%

Stop

Prev.

Select

DVD Recording Terms

•Write Once

• Discs initialize in “Video Mode” only

• Discs must be finalized in order to play on other

DVD players

• Discs cannot be “unfinalized”

• Rewritable

• Discs initialize in “Video Mode” or “VR Mode”

• Discs must be finalized in order to play on most

DVD players

• Discs can be “unfinalized”

DVD-R DVD-RW

• Limited editing features

• Widely compatible with older DVD players as

well as DVD-RAM recorders

• Extensive editing features (e.g., add chapters,

or combine chapters, etc.)

• Compatible with newer DVD players only

•XP(High Quality) ~1 hour/disc

•SP(Standard Quality) ~2 hours/disc

•LP(Low Quality) ~4 hours/disc

* Actual record time will vary depending on program content.

Video Mode VR Mode

Quality Setting Record Time/Disc*

Step by Step DVD Recording

Sanyo DRW-1000 Quick start guide

Sanyo DRW-1000 Quick start guide

Sanyo DRW-1000 Quick start guide

Related papers

Other documents