i i
1. Remove cardboard carton.
2. Removeall partsneededfor
assembly and set aside.
Centerstand
3. Placeunitoncenterstandfor
easyassembly.
RevC
051409
Matfor inside
compartment
Cargo compartment/
and hardware
Handlebarlevercovers
and hardware
Frontnosepiece
Pedals,crank
and plasticcover
Frontwheelfender
2
Rearaxle and chain covers
and hardware
Mirrors
Manufacturer Certificate Owners Manual
of Origin
!
ToolKit
Batterycharger
Nut
4. Insertleft and right mirrorintoholeon handlebar
andturn clockwise,securebytighteningnut.
Phillipsheadbolts
Bracket
Washers
and nuts
5. Placecargocompartmenton rearrackof
unit.Attachusingtwophillipsheadbolts.
6. Securecargocompartmentwith bracket,
washersand nutsprovidedinhardwarebag.
4
7.Fillbothfront andreartireswithair.Tire
pressureshouldbeseto36psi(250kpa).
8.Attachfront wheelfender to front forks with
four phillipsheadscrews,two for eachside.
9.Alignfront nosepieceunderfront panelandsnap
into place.Securewithtwo phillipsheadscrews.
10.Attach each cover to frame usingtwo
washersandtwo phillipsheadscrews.
Crank
Crank sha_
11.Removeand savenut
from pedalcrankshaft.
12.Attach leftand right cranksto crankshaft.
NOTE:Each crankwill be labeledLor Rfor left orright.
Securecrankto shaftwith nutpreviouslyremoved.
Pedal Nut Crank Cap
13.Attach left and right pedals to cranks.
NOTE:Each pedal will be labeledLor Rfor leftor right.
Securepedalto crankbytighteningnuton pedal.
14.Placecapcover
over nutoncrank.
Tab
Mudflap
15.Placeopeningof mudflap overtab
of mudflap attachment.Securefrom
behindwith twophillipsheadscrews.
phillipheadscrews
16.Attach each handlebar lever cover
using 2 phillips headscrews provided.
Outlet
Charger
Master switch located
under seat
17.Charge battery before use.Turn master switch
"ON". Plugchargerintooutletbelowseat cushion.
Referto ownersmanualfor chargingtimes.
/
