
InstallingtheKit
1.Alignthebracketwiththeedgesoftheframe
asshown.
g342677
Figure4
1.Drillhere.
2.Usingthebracketasatemplate,drill2holes
intotheframe.
WARNING
Usingadrillwithoutpropereye
protectionmayallowdebristoenterthe
eye,causinginjury.
Weareyeprotectionwheneveryouuse
adrill.
3.Ontheinsideoftheframe,aligntheholesof
thebrackettothedrilledholesandsecurethe
brackettothevalve.
g342678
Figure5
1.Screw(M8x12mm)
2.Valve
4.Securethebrackettotheframe.
g342679
Figure6
1.Bolt(5/16x7/8inch)andnut(5/16)
5.Torquethevalvescrew(M8x12)to1.9to2.4
N∙m(17to21ft-lb)
2