Contec PT-970W10WDT Owner's manual

IPC Series

Desktop PANEL-PC 970 Series

Fanless, Atom E3845, 10.1" WXGA

HDD, DC input, UPS

User’s Manual

CONTEC CO., LTD.

PT-970 User’s manual

i

Check Your Package

Thank you for purchasing the CONTEC product.

The product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or missing items,

contact your retailer.

Product Configuration List

PT-970W10WDT-DC

xxxxxx

[OS PreInstallModel]

Name

Pcs.

PC

1

AC adapter

1

AC cable *1*2

1

Rubber foot

4

M4 screw

1

M3 screw

4

Serial Number Label

1

Product guide (this sheet)

1

IPC Precaution List

1

Warranty Certificate

1

*1 This AC power cable is for the voltage of the 100VAC or less.

In the case that the voltage that this cable uses do not match you need to prepare other cable particularly.

*2 Do not use this AC power cable with any devices except for an attached AC adapter.

Product Configuration Image

* See the Product Configuration List to check if all the components are included for the specified number of units.

Product

guide

AC cable

Royalty consent

contract (OS)

Setup

Procedure Document

AC adapter Rubber foot

IPC

Precaution

List

Warranty

Certificate

Serial Number

Label

Setup

Procedure

Document

Royalty

consent

contract

Recovery Media

M4 screw M3 screwPC

Warranty CertificateProduct guide IPC Precaution

List

x 4 x 4

ii

PT-970 User’s manual

Copyright

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this

document.

The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

Trademarks

Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft

and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks

of their respective holder.

PT-970 User’s manual

iii

Table of Contents

Check your package ..................................................................................................................................... i

Copyright ..................................................................................................................................................... ii

Trademarks .................................................................................................................................................. ii

Table of Contents ....................................................................................................................................... iii

1. INTRODUCTION 1

About the Product........................................................................................................................................ 1

Features ................................................................................................................................................. 2

Supported OS ....................................................................................................................................... 2

Customer Support ........................................................................................................................................ 3

Web Site................................................................................................................................................ 3

How to Obtain Service ................................................................................................................................ 3

Liability ........................................................................................................................................................ 3

Safety Precautions ....................................................................................................................................... 4

Safety Information ............................................................................................................................... 4

Caution on the PT-970 Series ............................................................................................................. 4

2. SYSTEM REFERENCE 9

Specifications............................................................................................................................................... 9

Power Management Features ................................................................................................................... 13

Power Requirements ................................................................................................................................. 14

Power Consumption........................................................................................................................... 14

Physical Dimensions ................................................................................................................................. 15

3. HARDWARE SETUP 17

Before Using the Product for the First Time .......................................................................................... 17

Hardware Setup ......................................................................................................................................... 18

Attaching the FG ................................................................................................................................ 18

Installation Requirements.................................................................................................................. 19

4. BIOS SETUP 23

Introduction ................................................................................................................................................ 23

Starting Setup ............................................................................................................................................ 23

Using Setup ................................................................................................................................................ 24

Getting Help ....................................................................................................................................... 24

In Case of Problems ........................................................................................................................... 24

A Final Note About Setup ................................................................................................................. 24

Main Menu ................................................................................................................................................. 25

iv

PT-970 User’s manual

Setup Items ......................................................................................................................................... 25

Main............................................................................................................................................................ 26

Advanced ................................................................................................................................................... 27

Trusted Computing ............................................................................................................................ 28

ACPI Settings ..................................................................................................................................... 30

Super IO Configuration ..................................................................................................................... 31

H/W Monitor ...................................................................................................................................... 33

CPU Configuration ............................................................................................................................ 34

PPM Configuration ............................................................................................................................ 35

SATA Configuration ......................................................................................................................... 36

CSM Configuration ........................................................................................................................... 37

Chipset........................................................................................................................................................ 38

North Bridge ....................................................................................................................................... 39

Intel IGD Configuration .................................................................................................................... 40

LCD Control ....................................................................................................................................... 42

South Bridge Configuration .............................................................................................................. 44

Azalia HD Audio Configuration....................................................................................................... 45

USB Configuration ............................................................................................................................ 46

Security ...................................................................................................................................................... 48

Boot Configuration ................................................................................................................................... 50

Save & Exit ................................................................................................................................................ 52

5. EACH COMPONENT FUNCTION 53

Component Name ...................................................................................................................................... 53

Operation / Display section ............................................................................................................... 54

2.5 inch drive slot .............................................................................................................................. 54

Component Function ................................................................................................................................. 55

LED: POWER, ACCESS, STATUS ................................................................................................ 55

DC Power Input Connector: DC-IN ................................................................................................. 55

Power Switch: POWER SW ............................................................................................................. 56

USB2.0 Port: USB2.0 ........................................................................................................................ 56

Giga bit-Ethernet: LAN A, B ............................................................................................................ 57

Serial Port Interface: SERIAL A, B, C ............................................................................................ 58

6. ABOUT UPS 59

UPS Function ............................................................................................................................................. 59

7. APPENDIX 61

POST Codes............................................................................................................................................... 61

SERIAL I/O Address and Register Function .......................................................................................... 64

Watch-Dog-Timer ..................................................................................................................................... 70

Battery ........................................................................................................................................................ 74

PT-970 User’s manual

v

Lithium Battery .................................................................................................................................. 74

Ni-MH Battery ................................................................................................................................... 75

Life of SSD ................................................................................................................................................ 76

8. LIST OF OPTIONAL PRODUCTS 77

vi

PT-970 User’s manual

1. Introduction

PT-970 User’s manual

1

1.

Introduction

About the Product

This product is a liquid crystal integrated all-in-one computer, equipped with a 10.1-inch (WXGA 1280 ×

800) touch panel display. It can be used for a wide range of applications, including as a control panel for

medical devices or test equipment instead of a PC, or as a desk-mounted touch-type reception or

authentication terminal.

This product is equipped with a built-in UPS battery that can operate for 5 minutes or more in the case of

power failure such as a power outage and momentary blackout, contributing to improved system stability

and reliability by being able to automatically shut down the OS using the included utility software.

Additionally, the angle of the display can be adjusted, and if pressed forward 90° the display can be

closed completely, much like a laptop computer. In addition to desktop mounting using rubber feet

(included), the product can be screwed to a device, fixing it like an embedded computer.

This product is available in the following 1 models:

- OS-installed model with Intel Atom Processor E3845 1.91GHz

PT-970W10WDT-DC712211 (Memory 4GB, ECC, Windows 7 Professional for Embedded Systems

32bit (Japanese), HDD 500GB)

PT-970W10WDT-DC711724 (Memory 4GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English,Chinese, Korean), HDD 500GB)

PT-970W10WDT-DC741724 (Memory 4GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English,Chinese, Korean), SSD 256GB)

1. Introduction

2

PT-970 User’s manual

Features

Installable computer with desktop-type touch panel

A panel computer equipped with a 10.1-inch (WXGA 1280 × 800) touch panel display that can either be

mounted on a desktop using rubber feet (included) or screwed to a device, fixing it like an embedded

computer. The angle of the display can be adjusted, and it is possible to close the display like a laptop

computer by pressing forward 90°.

Safe even if power is interrupted. UPS backup power supply, OS automatic shutdown function

A backup power supply (nickel-metal hydride secondary battery) is built-in to the computer, protecting

the system from sudden shutdown caused by unintended power interruption such as a power outage and

momentary blackout. OS automatic shutdown utility software is also included.

Abundant expansion interface matched with device incorporation

Equipped with an abundant interface, including USB2.0 × 5, LAN × 2, and COM (RS-232C) × 3.

Peripheral equipment for professional use, such as barcode readers or thermal printers, can be connected

directly. Storage can also be easily exchanged from the side.

- Slitless/fanless design that reduces maintenance work

There is no need to worry about the intrusion of dust or foreign objects, and the use of parts that degrade

over time is minimized to facilitate maintenance.

- Remote power management function to reduce operation tasks

Supports system startup by external device over network (Wake-on-LAN), by general purpose input

(power on by GPI), and by modem reception (power on by ring). It encourages significant labor saving in

operation.

- A wide range of power supplies (10.8 - 31.2VDC) supported

As the product supports a wide range of power (10.8 - 31.2VDC), it can be used in a variety of power

environments. The separately available AC adapter adds support for 100 - 240VAC power.

Supported OS

- Windows 7 Professional for Embedded Systems 32bit (Japanese)

- Windows 10 IoT Enterprise LTSB 2016 64bit (Japanese, English,Chinese, Korean)

1. Introduction

PT-970 User’s manual

3

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently and

comfortably.

Web Site

https: //www.contec.com/

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Free download

You can download updated driver software and differential files as well as sample programs available in

several languages.

Note! For product information

Contact your retailer if you have any technical question about a CONTEC product or need its price,

delivery time, or estimate information.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you

purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be

liable for any incidental or consequential damages due to such defect or consequences that arise from

inexperienced usage, misuse, or malfunction of this device.

1. Introduction

4

PT-970 User’s manual

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting in

injury or death and the destruction of equipment and resources. Understand the meanings of these labels

to operate the equipment safely.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury or in property damage.

Caution on the PT-970 Series

Handling Precautions

- Always check that the power supply is turned off before connecting or disconnecting power cables.

- Do not modify the product.

- Always turn off the power before inserting or removing circuit boards or cables.

- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other

applications that require a very high level of reliability. Do not use the product in such applications.

- If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

- Do not attempt to replace the battery as inappropriate battery replacement poses a risk of explosion.

- For battery replacement, contact your retailer as it must be performed as a process of repair.

- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances. For details on replacing the battery, refer to the appendix.

DANGER

WARNING

CAUTION

WARNING

1. Introduction

PT-970 User’s manual

5

- Do not use or store this product in a location exposed to high or low temperature that exceeds range

of specification or susceptible to rapid temperature changes.

Example: - Exposure to direct sun

- In the vicinity of a heat source

- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this

product with its interior penetrated by water or any other fluid or conductive dust. If this product

must be used in such an environment, install it on a dust-proof control panel, for example.

- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of

specification.

- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such

products will cause this product to malfunction.

- Do not use or store this product in the presence of chemicals.

- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.

Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or

discoloration of the paint.

- This product’s case may become hot. To avoid being burned, do not touch that section while this

product is in operation or immediately after turning off the power. Avoid installation in a location

where people may come into contact with that section.

- CONTEC does not provide any guarantee for the integrity of data on HDD.

- Always remove the power cable from the power outlet before mounting or removing an expansion

board and before connecting or disconnecting a connector.

- Always remove the power cable from the power outlet before connecting or disconnecting a

connector.

- As for the product with a D-SUB connector, the appropriate tightening torque for the cable connector

is less than 2 kgf·cm.

- To prevent corruption of files, always shutdown the OS before turning off this product.

- CONTEC reserves the right to refuse to service a product modified by the user.

- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

cord immediately and contact your retailer.

- To connect with peripherals, use a grounded, shielded cable.

- Do not use any sharp-pointed object such as a mechanical pencil to touch the touch panel. Doing so

may scratch the touch panel, resulting in malfunctions.

- Do not subject the touch panel to shock as doing so may break it.

- When the surface or frame of the touch panel has become dirty, wipe it with neutral detergent. Do not

wipe the touch panel with thinner, alcohol, ammonia, or a strong chlorinated solvent. Use a protective

sheet (available as an option) if the touch panel is used where it can easily collect dust and dirt.

- It is a characteristic of analog touch panels that their resistance may vary with changes to the ambient

environment (temperature and humidity) and with their own aging, resulting in the deviation of the

detection point. If this is the case, calibrate the touch panel again to re-set calibration data.

- As for the product with a D-SUB connector, the appropriate tightening torque for the cable connector

is less than 2 kgf·cm.

- LCD may have a few bright spots that are always on or a few black spots that are always off. Color

irregularity may also occur depending on the viewing angle. This however is due to the structural

characteristics of the LCD; therefore, it is not a product fault.

- Burn-in on TFT Display

“Burn-in” may occur if the same display is retained for a long time. Avoid this by periodically

switching the display so that the same display is not maintained for a long time.

CAUTION

1. Introduction

6

PT-970 User’s manual

* Burn-In : Phenomenon characterized by a TFT display as a result of long-time display of the

same screen where a shadow-like trace persists because electric charge remains in the

LCD element even after the patterns are changed.

- The HDD connector doesn't support hot plug. The pulling out opening of the HDD cannot be done in

the state of power supply ON. Please neither pulling out opening of HDD in the state of power supply

ON of this product nor come in contact with HDD. This product may malfunction or cause a failure.

- This product's specifications allow the device to be rebooted from the BIOS screen during startup.

This has no effect on operation after the OS boots

- Component Life:

(1) Battery (Primary battery) --- The internal calendar clock and CMOS RAM are backed by a

Lithium primary battery.

The backup time at a temperature of 25°C with the power

disconnected is 10 years or more.

(2) HDD ------------ A hard disk is used for OS storage area of the model with HDD.

The assumed life is 20,000 hours (powered time) or five years, whichever

comes first.

* With the motor on 333 hours per month or less, 11 hours a day or less, and a

disk access time of 20% or less

(3) SSD ------------ SSD is used for OS storage area of the model with SSD.

The assumed life is about 3,000 times for MLC type.

For details on the life estimation, refer to the [Life of SSD] in Appendix.

(4) Backlight ------ The backlight rated life is 25,000 hours or more.

* Ambient temperature 25°C ±5°C, IF = 19 mA, reduced to 50% initial

brightness

(5) Touchpanel ---- The keystroke life is over 1 million uses.

* Load 3N or 5N, speed 30 - 60 times per minute, tip shaped silicone rubber

(6) Battery (Secondary battery) --- A nickel-metal hydride secondary battery is used to prevent

shutdowns in the case of a power outage.

Life expectancy: Approximately 4 years (Ambient temperature:

25°C, Backup time: 5 minutes, Backup frequency: Once a month)

* The battery life will vary greatly depending on the ambient

temperature. Even if it is within the specified temperature, if used

or stored in a high temperature environment for a long period of

time, the life span may be shortened considerably.

(7) AC adapter ---- The life expectancy of the AC adapter is 12,000 hours at the maximum load for

an ambient temperature of 25°C.

* Replacement of expendables is handled as a repair (there will be a charge).

* The service life for consumable parts are reference values and are not guaranteed values.

* If the AC adapter fails, CONTEC will replace it with an equivalent product (a charge may be

applied to the replacement). Also, note that we cannot provide analyses of failure causes.

1. Introduction

PT-970 User’s manual

7

FCC PART15 Class A Notice

EN55032 Class A Notice

Warning :

Operation of this equipment in a residential environment could cause radio interference.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

NOTE

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

1. Introduction

8

PT-970 User’s manual

2. System Reference

PT-970 User’s manual

9

2.

System Reference

Specifications

Table 2.1. Functional Specifications < 1 / 2 >

Model

PT-970W10WDT-DCxxxxxx

CPU Intel

®

Atom™ Processor E3845 1.91GHz

BIOS BIOS (mfd. by AMI)

Memory 4GB, PC3-10600(DDR3L 1333) ECC, On Board

Graphic Intel

®

HD Graphics (built-in CPU)

LCD type LCD type 10.1-inch TFT color LCD, WXGA (1280 x 800)

Backlight LED method, The ON/OFF software can control.

Touch panel Resolution WXGA (1280 x 800)

Detection

method

Resistive-film analog type

Connection Internal serial port

Audio HD Audio compliant

Speaker Internal piezoelectric speaker (monaural)

SATA*1 1 slot (2.5” S-ATA slot)

PT-970W10WDT-DC71xxxx : Built-in HDD (500GB, 1 partition) *1

PT-970W10WDT-DC74xxxx : Built-in SSD (256GB, 1 partition)

LAN *2 Intel I210IT Controller

1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)

USB USB 2.0 compliant 5 port

Serial I/F RS-232C (general-purpose) : 5port (two of the ports is used for internal)

Baud rate : 50 - 115,200bps

Hardware monitoring Monitoring CPU temperature, power voltage

Watchdog timer Software programmable ,255 level (1sec - 255sec)

Time up allows reset

RTC/CMOS Lithium backup battery life: 10 years or more.

The real-time clock is accurate within ±3 minutes (at 25°C) per month

Power Management Power management setup via BIOS, Power On by Ring / Wake On LAN,

Supports PC98/PC99 ACPI Power management

Secutity (TPM) TCG TPM2.0

*1: The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized from

OS might be displayed fewer than an actual value.

2. System Reference

10

PT-970 User’s manual

Table 2.1. Functional Specifications < 2 / 2 >

Model

PT-970W10WDT-DCxxxxxx

Interface

Audio

Internal piezoelectric speaker (monaural)

SATA 1 slot (2.5” S-ATA),

PT-970W10WDT-DC712211: Built-in HDD (500GB, 1 partition) *1

LAN

2 port (RJ-45 connector)

USB USB2.0 compliant 5port (TYPE-A connector x 5)

RS-232C

3 port (9pin D-SUB connector [male])

Power supply

Rated input voltage

12 - 24VDC

Range of input

voltage

10.8 - 31.2VDC

Power consumption

12V 3.2A, 24V 1.6A

External device power

supply capacity

SATA I/F : +5VDC 1A

USB2.0 I/F : +5V : 2.5A (500mA x 5) *2

UPS Battery

Type Ni-MH battery

Nominal voltage

6V

Nominal capacity

1,000mAh

Backup time

Over 5 minutes

Physical dimensions

(mm)

254.0(W) x 130.0(D) x 228.6(H) (No protrusions)

Weight

About 2.0kg

*2: When the battery is operated, the power supply to the rear 4 USB ports is stopped.

2. System Reference

PT-970 User’s manual

11

Table 2.2. Installation Environment Requirements

Model

PT-970W10WDT-DCxxxxxx

Ambient

specifications

Operating temperature

*3

0 - 35°C

Storage temperature *4

-10 - 50°C (within 30 days)

-10 - 40°C (within 90 days)

-10 - 30°C (within 1year)

Humidity

10 - 85%RH (No condensation)

Floating dust particles

Not to be excessive

Corrosive gases

None

Line-noise

resistance

Line noise

AC line / ±2kV *5,

Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)

Static

electricity

resistance

Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)

Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)

Vibration

resistance

Sweep

resistance

PT-970W10WDT-DC71xxxx :

10 - 50Hz/0.5G 25 min. each in x, y, and z directions

(JIS C60068-2-6compliant, IEC60068-2-6-compliant)

PT-970W10WDT-DC74xxxx :

10 - 50Hz/semi-amplitude 0.375 57 - 150Hz/1.0G

40 min. each in x, y, and z directions

(JIS C60068-2-6compliant, IEC60068-2-6-compliant)

Impact resistance

10G, half-sine shock for 11 ms in x, y, and z directions

(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)

Grounding

Class D grounding, SG-FG / continuity

Standard

VCCI Class A, FCC Class A,

CE Marking (EMC Directive Class A, RoHS Directive)

*3: For more details on this, please refer to chapter 3, “Installation Requirements”.

*4: Storing in high temperature environments for long periods of time greatly affects the life of the nickel-metal hydride

secondary battery. Make sure to store at the lowest temperature possible.

2. System Reference

12

PT-970 User’s manual

Table 2.3. AC Adapter specifications

Requirement

Description

Power supply space

Rated input voltage

100VAC to 240VAC (continuous input), 50 to 60Hz

Permissible input voltage

90VAC to 264VAC (continuous input), 50 to 60Hz

Input current

1.7A Max. (AC IN 90V)

Rated output voltage

+19VDC ±5%

Rated output current

3.42A (Max.)

Permissible momentary blackout

5ms or less

Dielectric strength (between Input P and S)

3.0kVAC for one minute

Insulation resistance (between P and S) Greater than 20MΩ (500VDC)

Construction

Length of cable

AC Power cable: 1.8m, DC cable: 1.2m

Input Plug Shape

AC Code : IEC60320-C5

AC Inlet : IEC60320-C6

External dimensions (mm) 46 (W) x 108 (D) x 30 (H) (not include projection of cable)

Weight

Main body: 210g, AC power cable: 180g

MTBF *5

100,000H (temperature 25

°

C)

*5: Estimates of MTBF and Longevity are not guaranteed but are for reference only.

2. System Reference

PT-970 User’s manual

13

Display Optical Specifications

Table 2.4. Display Optical Specifications

Parameter

Condition

Min.

Typ.

Visual angle

(vertical)

CR⊇10

φ = 180°

Display.

Monochro

me

80deg

85deg

φ = 0°

80deg

85deg

Visual angle

(horizontal)

φ

= +90°

80deg

85deg

φ

= -90°

80deg

85deg

Surface brightness (at center)

Display in white

255cd/m

2

300cd/m

2

* “Surface brightness” represents a numerical value per display. The expected brightness through a touch panel is

about 80% lower than the above value.

Figure 2.1. Definition of viewable range

The above optical specification data shows optical characteristics of the liquid crystal in the display;

the data does not represent the actual view on the display or its viewing angles.

Power Management Features

- Support both ACPI (Advanced Configuration and Power Interface).

- ACPI v2.0 compliant

- Hardware automatic wake-up

Co

ntrast ratio (CR) =

Brightness at screen center with white displayed

Brightness at screen center with black displayed

Left

( φ = 90o )

Z

Y

X

Top

( φ = 180

*

o )

Right

( φ = 90

o )

Bottom

( φ = 0

o )

( θ = 0

o )

Measurement direction

θ

Module

φ

CAUTION

Page is loading ...

Contec PT-970W10WDT Owner's manual

This manual is also suitable for

Contec PT-970W10WDT Owner's manual

Related papers

Other documents