2. Home
  3. Do-It-Yourself tools
  4. Garden tools
  5. Lawnmowers
  6. Toro
  7. Bagger Finishing Kit, 2009 and 2010 TITAN ZX6000 Series Zero-Turn-Radius Riding Mower

Toro Bagger Finishing Kit, 2009 and 2010 TITAN ZX6000 Series Zero-Turn-Radius Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Bagger Finishing Kit, 2009 and 2010 TITAN ZX6000 Series Zero-Turn-Radius Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3365-178RevA
BaggerFinishingKit
TITANZX6000SeriesZero-Turn-RadiusRidingMower
ModelNo.119-3454
InstallationInstructions
ThiskitrequirestheBaggerKittocompleteinstallation.Contact
yourAuthorizedServiceDealerorthemanufacturerCustomer
Servicetoobtainthenecessaryparts.Formoreinformation,visitus
atwww.Toro.com.
Safety
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaof
potentialdanger.Replaceanydecalthatisdamagedorlost.
110-6691
1.Thrownobjecthazard—keepbystandersasafedistance
fromthemachine.
2.Thrownobjecthazard,mower—donotoperatewithoutthe
deector,dischargecover,orgrasscollectionsystemin
place.
3.Cutting/dismembermentofhandorfoot—stayawayfrom
movingparts.
©2010—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
Installation
1
InstallingtheBaggerFrame
Partsneededforthisprocedure:
1
Baggerframeassembly(60inchdeck)
Procedure
ThisBaggerFinishingKitcontainsanewBaggerFrame
Assemblywhichisusedforunitswith60inchdecks
only.TheBaggerKitcomeswithaBaggerFrame
Assemblythatshouldbediscardedandreplacedwith
theoneincludedwiththisBaggerFinishingKit.
RefertotheBaggerKitinstallationinstructionsforthe
proceduretoinstallthebaggerframeassembly.
2
InstallingtheBlades
Partsneededforthisprocedure:
3
Hi-Liftblade
Procedure
1.Removetheexistingmowerbladesinstalledonyour
deck.RefertotheRemovingtheBladessectionin
theOperator’sManualformoreinformation.
2.InstalltheHi-Liftmowerbladeslocatedinloose
parts.RefertotheInstallingtheBladessectioninthe
Operator’sManualformoreinformation.
3
InstallingtheChute
Partsneededforthisprocedure:
1
Angledcutoffbafe
1
Curvedbafe
2
Locknut(5/16inch)
1Handknob
1Washer
1
Chute
Procedure
WARNING
Anuncovereddischargeopeningcouldallowthe
lawnmowertothrowobjectsintheoperatoror
bystander’sdirectionandresultinseriousinjury.
Also,contactwiththebladecouldoccur.
Neveroperatethelawnmowerunlessyouinstall
acoverplate,amulchplate,oragrasschuteand
catcher.
Neveroperatethemowerwiththedischargeopening
uncovered.Adischargecover,mulchcoverorbagging
chutemustalwaysbeusedwhenthemowerdeckis
operated.
1.Removefastenerssecuringthedeectorassemblyto
thedeck(
Figure1).Retainallfasteners.
2
G013095
1
2
3
4
5
Figure1
1.Deectorassembly4.Carriagebolt(existing),
reuse
2.Locknut(existing),retain5.Carriagebolt(existing),
retain
3.Locknut(existing),reuse
2.Removethedeectorassembly.Retainallpartsto
convertthedecktosidedischarge.
3.Locateandinstalltheangledcutoffbafetothe
deckattherearholesinthemowerdeck.Usethe
existingfastenersfromthatlocationtosecurethe
angledcutoffbafetothedeck.
G013096
1
2
3
4
5
6
7
8
9
10
Figure2
1.Holeinfrontwallofthe
deck
6.Highliftblade
2.Locknut
7.Carriagebolt(existing),
reuse
3.Horizontalpost,curved
bafe
8.Angledcutoffbafe
4.Verticalpost,curvedbafe9.Locknut(existing),reuse
5.Curvedbafe10.Center,forwardholein
mowerdeck
4.Installthecurvedbafetodeck.Alignthevertical
postinthecurvedbafewithcenter,forwardholein
thedeckandthehorizontalpostwiththeholeinthe
frontwallofthemowerdeck.Securehorizontalpost
tothefrontwallofthedeckusingalocknut.
5.Installthechutetothedeck.Makesuretheopening
intopofthechutealignswiththeexposedposton
thedecktopandtheforwardverticalplatemates
withthefoldedmetalbracketofthechute.
G013097
1
2
3
4
5
6
Figure3
1.Dischargechute4.Foldedmetalbracket,
chute
2.Handknob5.Forwardverticalplate,
deck
3.Washer6.Exposedpostinthedeck,
curvedbafe
6.Installawasherandhandknoboverthepostcoming
throughthechutetop.Handtightentosecurethe
chutetothedeck.
7.Hooktheexiblelatchonthechutetotheretaining
claspweldedtothesidewallofthedeck.
3
G013098
1
2
Figure4
1.Retainingclasp2.Flexiblelatch
4
ConnectingwiththeDischarge
Tube
NoPartsRequired
Procedure
1.Slidethecurvedendofthedischargetube(supplied
withthebaggerkit)intotheopeninginthebagger
top(Figure5).
G010641
1
2
3
4
5
Figure5
1.Dischargetube,curved
end
4.Peg
2.Openinginbaggertop
5.Rubberstrap
3.Dischargetube,aredend
2.Slidethearedendofthedischargetubeoverthe
endofthechute.Movetherubberretainingstrapon
thechutesnapsoverthepegonthedischargetube
tosecureit(Figure5).
4
Maintenance
RemovingtheFinishingKit
Wheneverthebaggerkitisremoved,thenishingkit
shouldberemovedusingthefollowingprocedure.
Retainallpartsforfutureinstallation.
1.Removethedischargetubefromthemachineand
installthedischargecover.
WARNING
Anuncovereddischargeopeningcouldallowthe
lawnmowertothrowobjectsintheoperatoror
bystander’sdirectionandresultinseriousinjury.
Also,contactwiththebladecouldoccur.
Neveroperatethelawnmowerunlessyouinstall
acoverplate,amulchplate,oragrasschuteand
catcher.
G013095
1
2
3
4
5
Figure6
1.Deectorassembly4.Carriagebolt(existing),
reuse
2.Locknut(existing),retain5.Carriagebolt(existing),
retain
3.Locknut(existing),reuse
2.Replacethemowerblades.
•RemovetheHi-Liftmowerbladesinstalled
onyourdeck.RefertotheRemovingthe
BladessectionintheOperator’sManualformore
information.
•Installthestandardmowerbladesremoved
previously.RefertotheInstallingtheBlades
sectionintheOperator’sManualformore
information.
5
Notes:
6
Notes:
7
/