Noble House 299366 Operating instructions

Brand: Noble House

Model: 299366

Type: Operating instructions

This manual is also suitable for

Label Picture Description QTY

Supporting Bar to hold

Hammock

Mid-Joint Support Bar 2

C Ground Bar 2

Hammock with

Wooden Support Rail

O Rope with Carabiners 4

Caution: You must read this before you proceed

Picture

CAUTION : This Hammock on Wooden Stand is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Have at least 03 men to help when assembling this Hammock on Wooden

Stand.

Hammock on Wooden Stand

Label Picture Description QTY

D Bolt(M10X14CM) 4

E Washer 19

F Nut 10

L Bucket Wrench 2

H Bolt(M10X24CM) 4

Metal Chain with Iron

Carabiners

KEye Bolt2

Q Bolt and Ring Nut 4

R Allen Key 1

N Bolt and Ring Nut 2

Before Beginning Assembly:

Put Support Bar to hold Hammock(A) into Mid-Joint Supporting Bar(B).

Then attach using Bolt(H) with Hardware(E,F) using Bucket Wrench (L).

Tighten the bolts of this step securely.

Attach Mid-Joint Support Bar(B) to Ground Bar(C) using Bolt(D) & Washer(E), as shown

in the picture.

In this step, DO NOT tighten the bolts.

Step 1

Step 2

Note:The

COUNTERSINK

holesideof

WoodenBar(B)

shouldbeonthe

outside.

NOTE: Havea

coupleofpartners

/assistantswhen

assemblingthis

step.

Step 3

Tighten the Bolts (D) from Step 1 using Hardware(E,F) with Bucket Wrench (L).

Tighten the bolts securely.

Step 4

Attach the Eye Bolt(K) to the tail end of the Support Bar to hold Hammock(A) using

Hardware(E,F) with Bucket Wrench(G,L).

Tighten the bolts of this step securely.

Note: The Eye Bolts should be facing the inside of the frame assembly, as pictured.

NOTE:This

stepshould

befinished

withtwoor

morepeople

together.

Step 5

Step 7

Hook the Chain with Carabiners (J) to the 2 two loop holes of at then end of Hammock

with Wooden Support Bars (M).

Step 6

Insert the Bolt and Ring Nut (N) into the Support Bar to hold Hammock(A), as shown in

the picture.

Tighten the bolts of this step completely.

Screw theBolt and Ring Nut(Q) to the four ends of the Wooden Suport Rails using allen

key (R)

Tighten the bolts of this step securely.

Step 9

Connect the four pieces of Eye Bolts(K) on the Hammock(M) to the Bolt and Ring Nut (N)

on Supporting Bar to hold Hammock(A) with Rope with Carabiner(O).

Adjust the Chain withCarabinerss(J). until the four Ropes are taut.

Your Hammock is ready for use.

Caution: Always be careful of your safety when getting on and off of the Hammock,

children should not be allowed on the Hammock without adult supervision.

Step 8

Connect the Hammock(M) to the Support Bar to hold Hammock(A) using Chain with

Carabiners(J).

Noble House 299366 Operating instructions

Brand: Noble House

Model: 299366

Type: Operating instructions

This manual is also suitable for

Download PDF

report

Noble House 299366 Operating instructions

This manual is also suitable for

Noble House 299366 Operating instructions

Related papers

Other documents