Noble House 295165 Installation guide

Brand
Noble House
Model
295165
Type
Installation guide

Noble House 295165

The Noble House 295165 Hammock on Wooden Stand is a sturdy and spacious hammock that can comfortably accommodate up to two people. It is made of durable materials and is easy to assemble. The hammock comes with all the necessary hardware, including bolts, washers, nuts, and a bucket wrench. It also includes two metal chains with iron carabiners for attaching the hammock to the stand.

The hammock stand is made of solid wood and is designed to be устойчив. It has a wide base that provides stability and prevents the hammock from tipping over. The stand also has a convenient carrying handle for easy transport.

Noble House 295165

The Noble House 295165 Hammock on Wooden Stand is a sturdy and spacious hammock that can comfortably accommodate up to two people. It is made of durable materials and is easy to assemble. The hammock comes with all the necessary hardware, including bolts, washers, nuts, and a bucket wrench. It also includes two metal chains with iron carabiners for attaching the hammock to the stand.

The hammock stand is made of solid wood and is designed to be устойчив. It has a wide base that provides stability and prevents the hammock from tipping over. The stand also has a convenient carrying handle for easy transport.

Label Picture Description QTY
A
Supporting Bar to hold
Hammock
2
B
Mid-Joint Support Bar 2
C Ground Bar 2
M
Hammock with
Wooden Support Rail
1
O Rope with Carabiners 4
Hammock on Wooden Stand
Caution: You must read this before you proceed
CAUTION : Do Not Swing on or in hammock. This could cause the product
to tip over resulting in possible injury.
This Hammock on Wooden Stand is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Have at least 03 people to help when assembling this Hammock on Wooden
Stand.
Picture
1 OF 7
Label Picture Description QTY
D Bolt(M10X14CM) 4
E Washer 19
F Nut 10
L Bucket Wrench 2
H Bolt(M10X24CM) 4
J
Metal Chain with Iron
Carabiners
2
K Eye Bolt 2
Q Bolt and Ring Nut 4
R Allen Key 1
N Bolt and Ring Nut 2
Before Beginning Assembly:
2 OF 7
Put Support Bar to hold Hammock(A) into Mid-Joint Supporting Bar(B).
Then attach using Bolt(H) with Hardware(E,F) using Bucket Wrench (L).
Tighten the bolts of this step securely.
Step 1
Step 2
Attach Mid-Joint Support Bar(B) to Ground Bar(C) using Bolt(D) & Washer(E), as shown
in the picture.
In this step, DO NOT tighten the bolts.
NOTE : Have a
couple of partners
/ assistants when
assembling this
step.
Note : The
COUNTERSINK
hole side of
Wooden Bar(B)
should be on
the outside.
3 OF 7
Step 3
Step 4
Tighten the Bolts (D) from Step 1 using Hardware(E,F) with Bucket Wrench (L).
Tighten the bolts securely.
Attach the Eye Bolt(K) to the tail end of the Support Bar to hold Hammock(A) using
Hardware(E,F) with Bucket Wrench(G,L).
Tighten the bolts of this step securely.
Note: The Eye Bolts should be facing the inside of the frame assembly, as pictured.
NOTE : This
step should
be finished
with two or
more people
together.
4 OF 7
Hook the Chain with Carabiners (J) through the 2 two loop holes of at then end of
Hammock with Wooden Support Bars (M).
Step 7
Step 5
Screw theBolt and Ring Nut(Q) to the four ends of the Wooden Suport Rails using allen
key (R)
Tighten the bolts of this step securely.
Step 6
Insert the Bolt and Ring Nut (N) into the Support Bar to hold Hammock(A), as shown in
the picture.
Tighten the bolts of this step completely.
N
J
J
M
Note: Tags Should Be facing Down
Note: Ring nuts must all be facing the same direction
5 OF 7
Connect the Hammock(M) to the Support Bar(A) to hold Hammock(M) using Chain with
Carabiners(J) by threading the Chain with Carabiner (J) through the hammock loop hole
on the Hammock (M) and attaching carabiner (J) to the Chain, attaching the other end of
the Chain with Carabiner (J) to Support Bar (A).
Step 9
Connect the four pieces of Eye Bolts(K) on the Hammock(M) to the Bolt and Ring Nut (N)
on Supporting Bar to hold Hammock(A) with Rope with Carabiner(O).
Adjust the Chain with Carabiners(J) until the four Ropes are taut.
Your Hammock is ready for use.
Caution: Always be careful of your safety when getting on and off of the Hammock,
children should not be allowed on the Hammock without adult supervision.
Step 8
Note: tighting all bolts before use
Note: Chains may require adjustment after assembly,
including over time to keep the four ropes taut
6 OF 7
7 OF 7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Noble House 295165 Installation guide

Brand
Noble House
Model
295165
Type
Installation guide

Noble House 295165

The Noble House 295165 Hammock on Wooden Stand is a sturdy and spacious hammock that can comfortably accommodate up to two people. It is made of durable materials and is easy to assemble. The hammock comes with all the necessary hardware, including bolts, washers, nuts, and a bucket wrench. It also includes two metal chains with iron carabiners for attaching the hammock to the stand.

The hammock stand is made of solid wood and is designed to be устойчив. It has a wide base that provides stability and prevents the hammock from tipping over. The stand also has a convenient carrying handle for easy transport.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents