Lastbus Wireless Backup Camera and Monitor Kit
User Manual
Before Operating The Set
Please Read The Instructions Completely
System Features:
1.Instant Real-time Video Transmission.
2.Custom Kit System for Convenient Parking
Assistance.
3.Includes All Necessary Cables & Wiring for
Installation.
4.This is ideal for cars, trucks, SUVs, Pickups or any
vehicle where you want to add a backup camera
5.Installation is not difficult. Instructions are
included.
6.The monitor can be fixed on dash or windshield
optional.
7.Monitor viewing is HD color and with guide lines
built-in camera.
8.Camera is IP68 waterproof and has 8 LED lights
for enhanced night capability.
9.Charger adapter for plug to cigaratte lighter was
provided, can power to monitor easily and simple.
10.We provide one year warranty and technical
support.
5 Inch Monitor Specification:
Brightness: 200 CD/m
Contrast: 200:1
NTSC/PAL System Auto Switching
Built-in 2.4Ghz Wireless Video Receiver
Dimensions (W x H x D):5.5” x 4.7” x0.6”
Power Voltage: 12-24V
Power Output: 150MW
Frequency: 2370-2510MHZ
Rear View Camera Specification:
Waterproof Rating: IP68
Image Sensor: 1/4” CMOS
TV System: NTSC/PAL
Resolution: 420TV Lines
Pixels Array: 733 x 493 Pixels
Minimum Illumination: 0 Lux [IR ON]
Video Output: 1.0V PP-75 Ohm
S/N Ratio: better than 48db
White Balance: Auto
View Angle: 130°
Power Voltage: 12-24V
Current Consumption: 120mA
Wiring Guide
Please follow the above wiring guide to install
this wireless parking system
Monitor Operation
Press the "MENU" button directly, you can
switch channels. Hold down the "MENU"
button, you can enter the settings interface.
You can change the brightness, contrast,
saturation, tint, language, mode of the
monitor.
Trouble Shooting
If you have problem when operating this product,please
refer to this section.The most common problem are list
below,along with likely cause and solution.
Monitor No Power
-Car engine has not been started,start the car engine
-Incorrect wiring connection.Check the wiring
Camera No Power
-Car engine has not been started,start the car engine
-Incorrect wiring connection.Check the wiring
Dark picture
-Press and hold the second button of the monitor to
enter the setting menu and increase the brightness of
the screen
Weak signal
-Check whether there is any interference and ensure
that the camera's bracket is connected to the metal
Warranty Card
Buyer Name
Phone Number
Return Address
Item Reference[SKU]
Order Number
Problem Details
We offer one-year warranty and lifetime technical
support for the products we have sold.
Please kindly fill this warranty card once you got
item and keep it well,since it need to be send back
together with the item when warranty active.
/
