Legrand Chan-L-Wire Pro Series System Fan Tap Kit Installation guide

Brand: Legrand

Model: Chan-L-Wire Pro Series System Fan Tap Kit

Type: Installation guide

Fan Tap Kit TFK120A TFK120ABULK

TFK120B TFK120BBULK

TFK120C TFK120CBULK

NOTE:

1. Use a listed metallic outlet box acceptable for fan support

with a centered 1/2" trade size knockout and 1/4" [6.4mm]

holes spaced 1 1/2" [38mm] apart as shown.

2. Use two 1/4-20 x 1 1/2 flat head screws with two 1/4-20

nylon insert locknuts.

8a Assemble aluminum saddle, neoprene spacer

and fan box together and tighten as shown.

8b Feed wires through assembly and snap tap

into saddle.

8c Attach fan and fan bracket to fan box per

manufacturer’s instructions.

8d Install fan tap to strut as in Step 4d.

Fan Tap Preassembled TF120A

TF120B

TF120C

9a Attach fan and fan bracket

to fan box per manufacturers

instructions.

9b Install fan tap to strut as in

step 4d.

Sentinel Lighting:

60 Woodlawn Street • West Hartford, CT 06110

Toll Free Tel. 888-439-3539

FAX 860-231-7299

41566R1 0603

SENTINEL LIGHTING

™

Chan-L-Wire

Pro Series System — Fan Tap Kit

INSTALLATION INSTRUCTIONS – ADDENDUM

1 1/2"

[38mm]

NOTE: One fan maximum between hangers. See channel loading conditions table in

Chan-L-Wire

Pro Series System installation instructions for distances.

Please refer to Chan-L-Wire

Pro Series System installation instructions (Part No. 42509) for steps 1-8.

Legrand Chan-L-Wire Pro Series System Fan Tap Kit Installation guide

Legrand Chan-L-Wire Pro Series System Fan Tap Kit Installation guide

Legrand Chan-L-Wire Pro Series System Fan Tap Kit Installation guide

Related papers

Other documents