Kohler 2209-47 Dimensions Guide

Type
Dimensions Guide

This manual is also suitable for

Features
Vitreous china
Undercounter
With or without overflow
Available with KOHLER Artist Editions designs
Includes 52047 clamp assembly, unless specified
15 (381 mm) x 12 (305 mm)
17 (432 mm) x 14 (356 mm)
19 (483 mm) x 15 (381 mm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
ADA
ICC/ANSI A117.1
CSA B651
OBC
ASME A112.19.2/CSA B45.1
UNDERCOUNTER LAVATORY
K-2209
K-2210, K-2211
OBC
ADA CSA B651
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Accessories
CP: Polished Chrome
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
K-2209 Lavatory, 15 (381 mm) x 12 (305 mm), with overflow, with clamps 0 Other_____
K-2210 Lavatory, 17 (432 mm) x 14 (356 mm), with overflow, with clamps 0 Other_____
K-2210-G Lavatory, 17 (432 mm) x 14 (356 mm), with glazed underside,
without overflow, with clamps
0 Other_____
K-2210-L Lavatory, 17 (432 mm) x 14 (356 mm), with overflow, without clamps 0 Other_____
K-2210-N Lavatory, 17 (432 mm) x 14 (356 mm), without overflow, with clamps 0 Other_____
K-2211 Lavatory, 19 (483 mm) x 15 (381 mm), with overflow, with clamps 0 Other_____
K-2211-G Lavatory, 19 (483 mm) x 15 (381 mm), with glazed underside,
without overflow, with clamps
0 Other_____
K-2211-L Lavatory, 19 (483 mm) x 15 (381 mm), with overflow, without clamps 0 Other_____
Product Specification:
The undercounter lavatory shall be made of vitreous china. Lavatory shall be available with or without overflow. Lavatory shall
be 15 (381 mm) in length and 12 (305 mm) in width, 17 (432 mm) in length and 14 (356 mm) in width, or 19 (483 mm) in
length and 15(381 mm) in width. Lavatory shall include 52047 clamp assembly for all models except K-2210-L and K-2211-L.
Lavatory shall be available with KOHLER Artist Editions designs. Lavatory shall be Kohler Model K-_____-____.
CAXTON
®
Page 1 of 2
105048-4-
DH
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Technical Information
Recommended Accessories
K-8998 P-Trap CP Other_____
Fixture*: Basin area Water
depth
K-2209 15 (381 mm) x
12 (305 mm)
4
(102 mm)
K-2210/K-2210-L/
K-2210-N/K-2210-G
17 (432 mm) x
14 (356 mm)
4
(102 mm)
K-2211/K-2211-G/
K-2211-L
19 (483 mm) x
15 (381 mm)
4
(102 mm)
Drain hole 1-3/4 (44 mm) D.
* Approximate measurements for comparison only.
Included components:
Basin clamp assembly (not included with
K-2210-L and K-2211-L)
52047
Cut-out template, K-2209 85838-7
Cut-out template, K-2210 1151011-7
Cut-out template, K-2211 1018997-7
Installation Notes
Install this product according to the installation guide.
Supplied basin clamp assemblies require 1 (25 mm)
minimum countertop thickness. Installer must supply anchors
for thinner countertops.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Ø 3/8"
(10 mm)
5/8"
(16 mm)
Marble Installation
Wood Installation
Sealant
Recommended ADA Installation
3" (76 mm)
24" (610 mm)
L of Fitting
C
2-1/2" (64 mm)
1/2" (13 mm)
1-1/4" OD
3/8" Cold
3/8" Hot
4" (102 mm)
1-1/8" (29 mm)
(X)
(Y)
ADA Drain Outlet
10-3/4"
(273 mm)
1-1/2" (38 mm)
1" (25 mm) = K-2209
Standard Installation
K-2209: (X) = 14" (356 mm), (Y) = 17" (432 mm)
K-2210: (X) = 16-1/4" (413 mm), (Y) = 19-1/4" (489 mm)
K-2211: (X) = 17-1/4" (438 mm), (Y) = 21-1/4" (540 mm)
2-5/8" (67 mm)
5-1/8"
(130 mm)
7-1/2"
(191 mm)
13-1/8"
(333 mm)
14"
(356 mm)
11"
(279 mm)
9"
(229 mm)
Min
8"
(203 mm)
Min
27"
(686 mm)
Min
34"
(864 mm)
10-3/4"
(273 mm)
Product Diagram
CAXTON
®
CAXTON
®
UNDERCOUNTER LAVATORY
Page2of2
105048-4-
DH
  • Page 1 1
  • Page 2 2

Kohler 2209-47 Dimensions Guide

Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI