Product Information
Applicable product:
Under-mount lavatory K-2355
Fixture*:
Basin area 17-5/8″ (448 mm) x 13″ (330 mm)
Water depth 3-3/4″ (95 mm)
Drain hole Ø 1-3/4″ (44 mm)
* Approximate measurements for comparison only.
Included components:
Basin clamp assembly 52047
Cut-out template 1051937-7
Recommended accessory:
Adjustable P-Trap K-8998
Installation Notes
Install this product according to the installation guide.
Supplied basin clamp assemblies require 1″ (25 mm)
minimum countertop thickness. Installer must supply anchors
for thinner countertops.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler (call 1-800-4-KOHLER). Kohler is not
responsible for cut-out errors when incorrect cut-out template
is used.
Will comply with ADA when installed per section 606
Lavatories of the Act.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
1-1/8" (29 mm)
7/16" (11 mm)
3/8" Hot
3/8" Cold
4" (102 mm)
Recommended ADA Installation
Standard Installation
3" (76 mm)
24" (610 mm)
L of Fitting
C
1-1/4" Outlet
2-1/2" (64 mm)
Marble Wood
Sealant
Sealant
Installation
Ø 3/8" (10 mm)
19-7/8" (505 mm)
9-15/16" (252 mm)
34"
(864 mm)
27"
(686 mm)
Min
9"
(229 mm)
Min
6"
(152 mm)
Max
8"
(203 mm)
Min
9"
(229 mm)
6-1/2"
(165 mm)
15-5/16"
(389 mm)
14"
(356 mm)
13-1/8"
(333 mm)
7-1/2"
(191 mm)
5/8"
(16 mm)
Roughing-In
K-2355
ARCHER
TM
UNDER-MOUNT LAVATORY
ARCHERTM UNDER-MOUNT LAVATORY
1063457-1-
D
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kohler K-2355-96 Installation guide
-
-
Kohler K-2357-96 Specification
-
-
-
-
-
-
-