Product Information
Applicable product:
Undercounter lavatory K-2355
Lavatory is ADA compliant when installed per
the requirements of the Accessibility
Guidelines, Section 606 Lavatories and
Mirrors, of the Act.
Recommended accessory:
Adjustable P-Trap K-8998
Included components:
Basin clamp assembly 52047
Cut-out template 1051937-7
Fixture*:
Basin area 17-5/8″ (44.8 cm) x 13″ (33 cm)
Water depth 3-3/4″ (9.5 cm)
Drain hole 1-3/4″ (4.4 cm) D.
* Approximate measurements for comparison only.
Installation Notes
Install this product according to the installation guide.
Supplied basin clamp assemblies require 1″ (2.5 cm)
minimum countertop thickness. Installer must supply anchors
for thinner countertops.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler (call 1-800-4-KOHLER). Kohler is not
responsible for cut-out errors when incorrect cut-out template
is used.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
1-1/8" (2.9 cm)
7/16" (1.1 cm)
3/8" Hot
3/8" Cold
4" (10.2 cm)
Recommended ADA Installation
Standard Installation
3" (7.6 cm)
24" (61 cm)
L of Fitting
C
1-1/4" Outlet
2-1/2" (6.4 cm)
Marble Wood
Sealant
Sealant
Installation
3/8" (1 cm) D.
19-7/8" (50.5 cm)
9-15/16" (25.2 cm)
34" (86.4 cm)
27"
(68.6 cm) Min
9"
(22.9 cm)
Min
6"
(15.2 cm)
Max
8"
(20.3 cm)
Min
10-1/16"
(25.6 cm)
7-9/16"
(19.2 cm)
15-5/16"
(38.9 cm)
14"
(35.6 cm)
13-1/8"
(33.3 cm)
7-1/2"
(19.1 cm)
5/8"
(1.6 cm)
Roughing-In
K-2355
ARCHER
TM
UNDERCOUNTER LAVATORY
ARCHERTM UNDERCOUNTER LAVATORY
1063457-1-
C