Mustek iDocScan P70 User guide

P70/P45

High Speed Document Scanner

[For Windows]

USER GUIDE

English

V1.1

All trademarks are

the property of their

respective owners

and all rights are

acknowledged.

Images and screenshots

shown inside this User

Guide are example only,

which may vary according

to the devices used and its

operating system.

“PXXX” mentioned In this Guide

refers to the model number P70 or

P45.

All contents and specifications of this User

Guide are subject to change without notice.

2

General Precautions

•

Never store the unit in hot, or very cold, or humid or dusty places.

•

For an extended storage period, we recommend storing the unit in a cool and dry place.

•

If the Scanner is left in extreme cold or hot conditions, allow it to adjust to normal room temperatures before use.

•

Only use accessories included with the Scanner.

•

When left unused for a long period of time, remove the power plug from the outlet.

•

Always handle the unit with care. Avoid dropping and strong impact.

•

Avoid objects (e.g. neckties, long hair, etc) being caught in the Scanner during operation.

•

Do not scan sharp objects or hard abrasive surfaces to avoid damage to the lens and other parts.

•

Do not scan originals with glue, grease, correction fluid, or wet ink on it which can cause malfunctions.

•

Operate the unit on a level, well-grounded work surface, and free of excessive vibration.

•

Don’t open the unit. Risk of electric shock.

•

When moving the Scanner, disconnect the power cord and connection cable.

•

When doing maintenance on the Scanner, remove the power plug from the outlet.

•

Do not leave the Scanner within the reach of children.

Environmental Information

Discarded electrical and electronic appliances are recyclable and should separate from the household waste. Please actively support in

conserving resources and protecting the environment by returning this appliance to the collection centers (if available).

SAFETY AND PRECAUTIONS

3

CONTENTS

SAFETY AND PRECAUTIONS ...................................................2

CONTENTS ............................................................................... 3

UNPACKING AND ASSEMBLING THE SCANNER .....................5

Package Contents .........................................................................5

Attaching and Extending the Tray ..................................................6

Detaching the Input Tray ...............................................................7

SCANNER PARTS ..................................................................... 8

STATUS LED INDICATORS .......................................................9

SYSTEM REQUIREMENTS .......................................................10

INSTALLATION ......................................................................... 11

Installing the Scanner Software ....................................................11

Connecting the Scanner ................................................................13

Turning Power On/Off ...................................................................13

Turning Power On ...................................................................13

Turning Power Off ..................................................................13

Power Saving Mode ......................................................................14

Showing/Hiding Tooltips ...............................................................15

Uninstalling the Scanner Driver ....................................................15

LOADING THE INPUT TRAY .....................................................16

Preparation ...................................................................................16

Loading the Paper Stack ...............................................................16

Loading Business Cards or Plastic Cards .....................................17

Loading Long Paper .....................................................................18

Loading the Protective Sheet ........................................................20

Protective Sheet Attentions ....................................................21

SETTING IDOCSCAN TOUCH ...................................................22

Adjusting the Setting Tabs ............................................................23

Destination (Scan to Folder) ...................................................23

Destination (Scan to Email) ....................................................25

Destination (Scan to Print) .....................................................26

Destination (Scan to PDF) ......................................................27

Destination (Scan to Application) ...........................................29

Destination (Scan to OCR)......................................................30

Destination (Scan to BCR) ......................................................31

Destination (Scan to Dropbox) ...............................................32

Destination (Scan to Google Drive) ........................................33

Scan Settings (For All Scan-to Options) .................................35

Image Adjustments (For All Scan-to Options) ........................39

USING THE PREVIEW WINDOW .............................................45

Previewing the Image ...................................................................45

Preview Window Controls .............................................................46

SCANNING OPERATION ...........................................................48

Scanning Using iDocScan Touch Panel ........................................48

Scanning Using the Scanner Buttons ...........................................51

Preview and Save Dialog ..............................................................52

Stopping a Scan ...........................................................................53

Continue a Scan ............................................................................54

4

SCANNING USING TWAIN INTERFACE ....................................55

Accessing the TWAIN Interface ....................................................55

Previewing and Scanning .............................................................56

Cancelling a Scan .........................................................................58

Creating a New Scan Profile .........................................................59

Renaming a Scan Profile ........................................................60

Deleting a Scan Profile ...........................................................60

TWAIN Settings and Preview Controls ..........................................61

MAINTENANCE ........................................................................64

Cleaning the Scanner ...................................................................64

Cleaning Outside of the Scanner.............................................65

Cleaning Automatic Document Feeder ....................................65

Calibrating the Scanner .................................................................67

Replacing Consumable Items .......................................................69

Checking Consumable Items Status .......................................70

Replacing Separation Pad.......................................................70

Replacing Separation Roller Assembly ...................................71

Replacing Feed Roller Assembly ............................................73

Clearing Paper Jams .....................................................................75

Adjusting Multi-Feed Detection Sensitivity .............................76

TROUBLESHOOTING ...............................................................77

SPECIFICATIONS .....................................................................80

CONTENTS (CONTINUED)

5

Package Contents

Make sure following items are included in this package.

Scanner

Input Tray

(see Attaching and Extending

the Tray)

AC Adapter

(see Connecting the

Scanner)

Power Cord

(see Connecting the

Scanner)

USB Cable

(see Connecting the

Scanner)

Installation DVD

(see Installing the Scanner Software)

Calibration Sheet

(see Calibrating Scanner)

Quick Start Guide

UNPACKING AND ASSEMBLING THE SCANNER

6

Attaching and Extending the Tray

When you unpack this package first time you will need to assemble the

Input Tray prior to use.

IMPORTANT: Make sure to remove all packaging and tapes from the

Scanner before use.

1.

Hold the Input Tray, then insert locking tabs on the Input Tray into

the slots on the top of the Scanner.

1

2

2.

Push in the locking tabs into the slots to snap them into place.

1

2

3.

Pull the Output Tray completely out, and lift up the Stopper at the

end of the Output Tray.

Stopper

4.

If necessary, pull out the Input Tray Extension and then unfold the

Support Flap.

Extension and

Support Flap

UNPACKING AND ASSEMBLING THE SCANNER (CONTINUED)

7

UNPACKING AND ASSEMBLING THE SCANNER (CONTINUED)

Detaching the Input Tray

1.

Retract the Input Tray Extension and the Support Flap back into

the Input Tray.

2.

Gently push it backward to release the Input Tray from the

Scanner.

1

2

3.

Pull away the Input Tray from the Scanner.

8

1

Open Tab Pull this tab to open the ADF cover.

2

Automatic

Document Feeder

(ADF) and Cover

Feed paper stack from the Input Tray

automatically for scanning. Open the ADF

cover when maintenance is required.

3

Output Tray

Extension

Pull the tray out to hold paper as it exits

from the ADF.

4

Stopper Lift it up to keep paper from sliding off.

5

Input Tray Extension

and Support Flap

Extend them if the paper is longer than the

Input Tray.

6

Input Tray

Holds paper stack to be fed into the ADF for

scanning.

7

Paper Guides Adjust the Guides to match the paper width.

8

Control Panel

a

Power and Power

LED

Turn on or off the power. Show the LED

indicator (see Status LED Indicators).

b

Scan/Stop and

Operation LED

Start or stop a scan. Show the LED

indicator (see Status LED Indicators).

c

LED Display

Display the selected Scan-to option from

1~9.

d

Up/Down Selector

Use the up and down arrow to cycle

through the Scan-to options from 1~9.

9

Power Jack Connect the Power Adapter.

10

USB Port (To PC) Connect the USB Cable to a computer.

SCANNER PARTS

1

5

6

7

8

a

b

c

d

9

10

2

3

4

9

Names Light State Status Description

Power LED

Off Indicates the power is turned off.

Solid green Indicates the power is turned on.

Solid red Indicates the ADF Cover is open.

Operation LED

Off Indicates no scanning activity.

Solid blue Indicates the Scanner is in operation.

Solid red Indicates the USB Cable is not connected to a computer.

Flashing red

Indicates a scanner error or paper jam (see Clearing Paper Jams).

STATUS LED INDICATORS

Power LED

Operation LED

10

Following minimum system requirements are recommended to achieve the best performance from iDocScan PXXX scanner.

•

Computer with Intel core Duo 2.4 Ghz cPU or higher

•

XGA (1024 x 768) color screen

•

4GB RAM or greater

•

USb 2.0 high-speed port

•

DVD-ROm drive

•

5Gb available hard disk space for software installation

•

Supported operating systems: Windows XP, Vista, 7, 8, 8.1 and 10

NOTE

The scanning speed and performance are determined by the specifications of your computer. The higher specification of your computer, the

better the Scanner will be performed.

SYSTEM REQUIREMENTS

11

Installing the Scanner Software

The Scanner comes with the Scanner driver and associated applications

for operating the Scanner. Please install all of the applications to ensure

all functions of the Scanner work properly.

Please complete all software installation before connecting the Scanner.

NOTE

Do not connect USB Cable to the Scanner and your computer when

starting installation process.

1.

Insert the Installation DVD into a DVD-ROM drive on your

computer. The installation menu will open automatically.

If the installation menu does not open automatically, double click on

the icon for your computer’s DVD-ROM drive.

2.

The installation menu is displayed as following.

•

Scanner Driver - Note that you must install it first in order to use

the Scanner. Scanner Driver includes following:

a. TWAIN and WIA driver: it comes with TWAIN interface to use

the Scanner from within any WIA or TWAIN-compliant graphics

software applications such as PageManager, Photoshop.

b. iDocScan Touch: this software application allows you to easily

scan from the Scanner buttons or within this application.

c. Manual: this is the complete User Guide for the Scanner.

INSTALLATION

12

d. Clean Calibration: Run this tool to clear the calibration data left

from the previous scanner, when you use another same model

scanner on the same computer with a previous driver.

e. Calibration: Run this tool when the scanned image’s colors did

not match the original colors over time in use of the Scanner.

•

ABBYY FineReader Sprint - This application allows to convert

the scanned text into editable text using the Scan To OCR

(Optical Character Recognition) function of the Scanner. For

the detailed information of this application, see the “Help” file

integrated within this application.

•

ABBYY Business Card Reader -

This application

allows to

capture, store, organize and work with contact data from business

cards

using the Scan To BCR ( Business Card Recognition)

function of the Scanner.

For the detailed information of this

application, see the “Help” file integrated within this application.

•

Presto! PageManager - This application is a document

management application designed to assist in scanning, sharing

and organizing documents and files. For the detailed information

of this application, see the “Help” file integrated within this

application.

•

Adobe Acrobat Reader - This application allows to open the

scanned image that is converted into PDF format using the Scan

To PDF function of the Scanner. For the detailed information

of this application, see the “Help” file integrated within this

application.

3.

Click Scanner Driver from the menu, then select a preferred

language for the user interface.

4.

Click Next when the Welcome screen appears, then follow on-

screen instructions to complete installation.

5.

When the installation completes, select the Yes, I want to restart

my computer now and click Finish.

INSTALLATION (CONTINUED)

13

NOTE

Return to the main menu of the Installation DVD to install all other

applications in order to obtain complete scanning functions. Follow the

onscreen instructions of the wizard to complete the installation.

Connecting the Scanner

1.

Connect the Power Cord with the AC Adapter.

2.

Connect the AC Adapter to the Scanner’s Power Jack.

3.

Plug the Power Cord into a power socket.

4.

With the computer on, connect the USB Cable to the USB Port on

the computer and the other end to the back of the Scanner.

1

2

4

3

INSTALLATION (CONTINUED)

Turning Power On/Off

Turning Power On

Press <Power> until Power LED turns green.

Your computer then recognizes that the Scanner has been plugged into

the USB Port and automatically loads iDocScan Touch [ ] in the system

tray.

iDocScan Touch icon might be hidden, and require that you click the

arrow in the system tray to reveal it.

Turning Power Off

Press <Power> for 3-5 seconds until the Power LED turns off.

When the power is off, iDocScan Touch icon [

] will appear, indicating

that the Scanner is not ready for use.

14

Power Saving Mode

By default, when the Scanner has been no operation for 15 minutes, the

Scanner will automatically turn off. To disable this setting or change the

interval, do following:

1.

Click the Scanner icon [ ] from the system tray to bring up the

iDocScan Touch panel.

2.

Click [

i

] (information) at the bottom right of the iDocScan Touch

panel.

INSTALLATION (CONTINUED)

3.

The Information dialog box appears. You can set the time interval

to “5 min.”, “10 min.”, “15 min.”, “30 min.”, “45 min.”, “1hr.”, and

“Never” from the Auto Power Off drop-down list.

4.

Click OK to save the changes, and close the Information dialog box.

15

Showing/Hiding Tooltips

You can show (default) or hide the tooltips for the iDocScan Touch panel

and the settings page when you are familiar with the instructions.

Right-click on the Scanner icon [

] from the system tray to bring up

the following menu, then click on Show Tooltips to uncheck it.

Uninstalling the Scanner Driver

1.

Unplug the USB cable between the computer and the

Scanner.

2.

Right-click on the Scanner icon [ ] from the system tray, then

click on Exit to disconnect the Scanner and exit the iDocScan

Touch application.

3.

Go to the “Start” menu, select “(All) Programs”, “iDocScan PXXX”,

and then “Uninstall”.

4.

Follow on-screen instructions to completely remove the Scanner

Driver from the computer.

INSTALLATION (CONTINUED)

16

Preparation

Please read below NOTE before scanning to prevent misfeeds, paper

jams and protect your originals.

NOTE

•

Do not load paper other than those with the paper size, type, and

weight specified in the Specification.

•

The Input Tray capacity can hold 120 sheets for the plain paper

or 30 cards for the business cards. Paper overloading may cause

paper jams.

•

Ensure staples and paper clips have been removed prior to

scanning as they may cause damage to the Automatic Document

Feeder and your originals.

•

Do not load paper with wet ink or liquid correction fluid, curls,

wrinkles, folds, irregular shapes or tears into the Input Tray.

•

Do not scan fragile photos, very thin and thick paper, and

important originals as misfeeding may wrinkle or damage them.

•

If a stack of paper cannot be fed into the Input Tray properly, try to

reduce the number of paper in the stack.

•

When scanning a stack of business cards or other small items (for

example, credit cards, IDs, etc), place the long side of the cards

parallel with the Paper Guides.

•

Long sheet of paper, plastic cards, and embossed cards can be

scanned one at a time.

•

Use the Paper Guides to keep paper straight when feeding.

Loading the Paper Stack

1.

Flex the paper stack back and forth, then fan the paper to loosen

them.

2.

Straighten the top edges of the paper stack on a level of surface.

LOADING THE INPUT TRAY

17

3.

Load the paper stack with the front page face down and the top

edge first. Slide the paper stack straight into the Scanner until it

meets resistance.

A

4.

Adjust the Paper Guides to fit the width of the paper stack.

Do not make the Paper Guides too tight against the paper, because

that can cause problems to feed.

A

Loading Business Cards or Plastic Cards

1.

Use the same techniques to loosen and straighten the card stack

as the “Loading the Paper Stack”.

2.

Slide the Paper Guide to the center.

3.

Load the card stack face down, and the long side parallel with the

Paper Guides. Slide the card stack straight into the Scanner until it

meets resistance.

When scanning plastic or embossed cards, load one card at a time.

LOADING THE INPUT TRAY (CONTINUED)

18

LOADING THE INPUT TRAY (CONTINUED)

NOTE

•

Embossed cards may not be scanned properly due to the

embossment.

•

Plastic cards with glossy surfaces may not scan properly.

•

Select “Auto” for the Scan Size when scanning plastic or

embossed cards (see Adjusting the Setting Tabs > Scan Settings

(For All Scan-to Options) > Scan Size).

•

When scanning plastic and embossed cards, make sure to select

the “Thick Media Mode” checkbox and uncheck “Document

Protection” checkbox (see Adjusting the Setting Tabs > Scan

Settings (For All Scan-to Options) > Thick Media Mode).

Loading Long Paper

1.

Pull out the Input Tray Extension and then unfold the Support Flap.

It is recommended to retract the Input Tray Extension to the storage

position when loading a long sheet of paper with the end hanging

downward.

19

2.

Load a long sheet of paper one at a time with the front page face

down and the top edge first. Slide the paper straight into the

Scanner until it meets resistance.

3.

Adjust the Paper Guides to fit the width of the paper.

Do not make the Paper Guides too tight against the paper, because

that can cause problems to feed.

NOTE

•

Select “Long Sheet” from the Scan Size setting when scanning

a long document exceeding 356mm (14”) up to 3000mm (118”)

(see Adjusting the Setting Tabs > Scan Settings (For All Scan-to

Options) > Scan Size).

•

If the document is exceeded the maximum support length for the

ADF, the scanning will stop with an error message appeared. The

exceeded part of the document cannot be scanned.

•

Secure the long paper with your hands during scanning to prevent

paper being fed skewed, which can result in damage to your

original.

•

Ensure the Output Tray is fully extended for the long paper to be

outputted from the ADF to prevent the paper jam.

LOADING THE INPUT TRAY (CONTINUED)

20

Loading the Protective Sheet

NOTE: The Protective Sheet is an optional item. To purchase

a Protective Sheet, please contact your local supplier or visit

http://www.mustek.com.

You can scan the paper that is bigger than B4 size up to A3 size using

the merge scanning method.

1.

For the first time use, please remove the thin transparent film on

both sides of the Protective Sheet.

A4

LTR

1 2 3 4

2.

Fold the paper in half with the sides to be scanned facing out.

ABC

A

ABC

A

A4

LTR

1 2

A4

LTR

3 4

Fold line

3.

Place the paper in the center of the Protective Sheet, and align the

top of the paper so it touches the top of the Protective Sheet.

ABC

A

ABC

A

A4

LTR

1 2

A4

LTR

3 4

Fold line

Align at the top

and center

4.

Insert the top of Protective Sheet with the black border downwards

and load it in the direction of the arrow into the Input Tray.

ABC

A4

LTR

1 2 3 4

A4

LTR

1 2 3 4

Fold line

NOTE

Load ONLY one Protective Sheet at a time.

LOADING THE INPUT TRAY (CONTINUED)

Page is loading ...

Mustek iDocScan P70 User guide

This manual is also suitable for

Mustek iDocScan P70 User guide

Related papers

Other documents