2. Crestron
  3. TST-902-DSW-BBI

Crestron TST-902-DSW-BBI User guide

  • Hello! I am an AI chatbot trained to assist you with the Crestron TST-902-DSW-BBI User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DO GUIDE
DO Check the Box
QTY PRODUCT PART NUM.
4 Screw, 06-32 x 1 1/2", Pan Head, Phillips 2007254
DO Learn More
Visit the website for additional information and the latest rmware updates.
Crestron Electronics
15 Volvo Drive, Rockleigh, NJ 07647
888.CRESTRON | www.crestron.com
TST-902-DSW-BBI
Wall Mount Back Box for TST-902-DSW - International Version
DO Install the Device
The Crestron
®
TST-902-DSW-BBI provides a recessed, wall-mounted metal back box for the
TST-902-DSW Wall Mount Docking Station (sold separately). It is designed for installation in
concrete and masonry applications. Conduit knockouts are provided on the top and bottom.
NOTE: If mounting in a surface other than a solid material (for example, drywall), Crestron
offers the TST-902-DSW-BB or the TST-902-DSW-PMK.
NOTE: Depending on the installation, forced ventilation may be required.
NOTE: The knockout holes are intended for Class 2 wiring only and are 29 mm (1 1/8”) in
diameter. Remove the appropriate knockouts before installation.
Make sure the arrow on the label inside the back box is facing upward. Mount the
TST-902-DSW-BBI as shown in the following illustration.
Solid Mounting Surface
Such as Concrete
or Masonry
TST-902-DSW-BBI
Plaster Wiring
TST-902-DSWBezel
Screws (4)
06-32 x 1 1/2”
Cutout in
Mounting
Surface
Mounting the TST-902-DSW-BBI (Exploded View)
DO GUIDE
DOC. 7753B (2043160) 05.15
Specications subject to change without notice.
The specic patents that cover Crestron products are listed at patents.crestron.com. Product warranty can be found at www.crestron.com/warranty.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks,
and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names
of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2015 Crestron Electronics, Inc.
/