FMI D6041 Operating instructions

Brand: FMI

Model: D6041

Type: Operating instructions

Brass-Look Louver Kits D6037 and D6041

INSTRUCTIONS FOR

REPLACING LOUVERS

TOP LOUVER

1. Lift upward and out to remove top black louver from the

fireplace.

2. Insert tabs at the top of the glass door assembly into slots on

brass louver. Gently lower louver against door.

BOTTOM LOUVER

1. Open lower black louver on fireplace.

2. Use a phillips head screwdriver to remove the screws from

the left hinge pin. Leave hinge pin in fireplace.

3. Remove the screws from the right hinge pin. Remove hinge

pin from fireplace.

4. Screw the right hinge pin to the lower right section of the

bottom louver (see Figure 3). Place right hinge pin into hole

on right side of front assembly.

5. Screw the left hinge pin to the lower left section of the bot-

tom louver with hinge pin already in place in front assembly.

For Replacing Top and Bottom Louver for 37" and 41" Fireplace

Slots for

attaching top

louver to

fireplace

Screw holes for

attaching hinge pin

to bottom louver

Top Louver

Tab

Figure 2 - Removing/Replaceing Top Louver

Figure 1 - New Louver

Screw

Hinge Pin

Screw

Bottom

Louver

Figure 3 - Removing/Replacing Bottom Louver

104984-01

REV. A

07/98

2701 Industrial Drive

P.O. Box 90004

Bowling Green, KY 42102-9004

INTERNATIONAL

104984 01

NOT A UPC

FMI D6041 Operating instructions

FMI D6041 Operating instructions

FMI D6041 Operating instructions

Related papers

Other documents