FMI D6034 Operating instructions

FMI
Brand
FMI
Model
D6034
Type
Operating instructions
Brass-Plated Louver Kits D6034
INSTRUCTIONS FOR
REPLACING LOUVERS
TOP LOUVER
1. Lift upward and out to remove top black louver from the fire-
place.
2. Insert tabs at the top of the glass door assembly into slots on
brass louver. Gently lower louver against door.
BOTTOM LOUVER
1. Open lower black louver on fireplace.
2. Use a phillips head screwdriver to remove the screws from the
left hinge pin. Leave hinge pin in fireplace.
3. Remove the screws from the right hinge pin. Remove hinge
pin from fireplace.
4. Screw the right hinge pin to the lower right section of the bot-
tom louver (see Figure 3). Place right hinge pin into hole on
right side of front assembly.
5. Screw the left hinge pin to the lower left section of the bottom
louver with hinge pin already in place in front assembly.
For Replacing Top and Bottom Louver for 34" Fireplace
Slots for
attaching top
louver to
fireplace
Screw holes for
attaching hinge pin
to bottom louver
Top Louver
Tab
Figure 2 - Removing/Replacing Top Louver
Figure 1 - New Louver
Screw
Hinge Pin
Hinge Pin
Screw
Bottom
Louver
Figure 3 - Removing/Replacing Bottom Louver
107597-01
REV. A
07/00
2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY 42102-9004
www.desatech.com
INTERNATIONAL
NOT A UPC
107597 01
  • Page 1 1

FMI D6034 Operating instructions

FMI
Brand
FMI
Model
D6034
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents