Brass-Plated Louver Kits D6034
INSTRUCTIONS FOR
REPLACING LOUVERS
TOP LOUVER
1. Lift upward and out to remove top black louver from the
fireplace.
2. Insert tabs at the top of the glass door assembly into slots on
brass louver. Gently lower louver against door.
BOTTOM LOUVER
1. Open lower black louver on fireplace.
2. Use a phillips head screwdriver to remove the screws from
the left hinge pin. Leave hinge pin in fireplace.
3. Remove the screws from the right hinge pin. Remove hinge
pin from fireplace.
4. Screw the right hinge pin to the lower right section of the
bottom louver (see Figure 3). Place right hinge pin into hole
on right side of front assembly.
5. Screw the left hinge pin to the lower left section of the bot-
tom louver with hinge pin already in place in front assembly.
For Replacing Top and Bottom Louver for 34" Fireplace
®
Slots for
attaching top
louver to
fireplace
Screw holes for
attaching hinge pin
to bottom louver
Top Louver
Tab
Figure 2 - Removing/Replaceing Top Louver
Figure 1 - New Louver
Screw
Hinge Pin
Hinge Pin
Screw
Bottom
Louver
Figure 3 - Removing/Replacing Bottom Louver
105621-01
REV. A
03/99
2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY 42102-9004
www.desatech.com
INTERNATIONAL
NOT A UPC
105621 01
/
