ESAB Tradestig AC/DC 180 User manual

ESAB
Brand
ESAB
Model
Tradestig AC/DC 180
Category
Welding System
Type
User manual

ESAB Tradestig AC/DC 180 is a fan cooled power source providing both AC and DC current outputs for use in Tungsten Inert Gas (TIG) or Manual Metal Arc (MMA) welding processes. In the TIG - DC welding mode, the unit may be used to weld stainless steel, copper and its alloys and nickel and its alloys. In the TIG - AC mode good quality welds may be produced in aluminium and its alloys. MMA - AC or DC is used for the welding of most ferrous or non-ferrous metals using covered electrodes.

ESAB Tradestig AC/DC 180 is a fan cooled power source providing both AC and DC current outputs for use in Tungsten Inert Gas (TIG) or Manual Metal Arc (MMA) welding processes. In the TIG - DC welding mode, the unit may be used to weld stainless steel, copper and its alloys and nickel and its alloys. In the TIG - AC mode good quality welds may be produced in aluminium and its alloys. MMA - AC or DC is used for the welding of most ferrous or non-ferrous metals using covered electrodes.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

ESAB Tradestig AC/DC 180 User manual

ESAB
Brand
ESAB
Model
Tradestig AC/DC 180
Category
Welding System
Type
User manual

ESAB Tradestig AC/DC 180 is a fan cooled power source providing both AC and DC current outputs for use in Tungsten Inert Gas (TIG) or Manual Metal Arc (MMA) welding processes. In the TIG - DC welding mode, the unit may be used to weld stainless steel, copper and its alloys and nickel and its alloys. In the TIG - AC mode good quality welds may be produced in aluminium and its alloys. MMA - AC or DC is used for the welding of most ferrous or non-ferrous metals using covered electrodes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents