Cebora 240 TIG Star 251 AC-DC User manual

Cebora
Brand
Cebora
Model
240 TIG Star 251 AC-DC
Category
Welding System
Type
User manual

Cebora 240 TIG Star 251 AC-DC is a constant current source suited for welding with TIG or covered electrode procedures. Its unique setting range (5-250 A), square-wave technology and complete welding current control make this generator a quality high-technology product. Some of its most notable features are:

  • The ability to weld aluminum, brass or magnesium using alternating current (A.C.)
  • The ability to weld all other materials, as well as MMA welding with all types of covered electrodes, using direct current (D.C.)
  • Automatic gas flow after welding is finished, which can be adjusted from 0.3 to 30 seconds

Cebora 240 TIG Star 251 AC-DC is a constant current source suited for welding with TIG or covered electrode procedures. Its unique setting range (5-250 A), square-wave technology and complete welding current control make this generator a quality high-technology product. Some of its most notable features are:

  • The ability to weld aluminum, brass or magnesium using alternating current (A.C.)
  • The ability to weld all other materials, as well as MMA welding with all types of covered electrodes, using direct current (D.C.)
  • Automatic gas flow after welding is finished, which can be adjusted from 0.3 to 30 seconds
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Cebora 240 TIG Star 251 AC-DC User manual

Cebora
Brand
Cebora
Model
240 TIG Star 251 AC-DC
Category
Welding System
Type
User manual

Cebora 240 TIG Star 251 AC-DC is a constant current source suited for welding with TIG or covered electrode procedures. Its unique setting range (5-250 A), square-wave technology and complete welding current control make this generator a quality high-technology product. Some of its most notable features are:

  • The ability to weld aluminum, brass or magnesium using alternating current (A.C.)
  • The ability to weld all other materials, as well as MMA welding with all types of covered electrodes, using direct current (D.C.)
  • Automatic gas flow after welding is finished, which can be adjusted from 0.3 to 30 seconds
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents