Aaeon EMB-H81A User manual

Brand: Aaeon

Model: EMB-H81A

Category: Motherboards

Type: User manual

Industrial Motherboard

EMB-H81A

E9305

Revised Edition v2

April 2014

This document is copyrighted, 2014. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products described

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to

change without notice. While reasonable efforts have been made in the preparation

of this document to assure its accuracy, the original manufacturer assumes no

liabilities resulting from errors or omissions in this document, or from the use of the

information contained herein.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• AMI is a trademark of American Megatrends Inc.

• Intel

, Core™ are trademarks of Intel® Corporation.

• Microsoft Windows

is a registered trademark of Microsoft Corp.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

iii

Contents

Chapter 1 Product overview 1-1

1.1 Package contents......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specifications ............................................................................... 1-2

Chapter 2 Motherboard information 2-1

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Screw size ..................................................................................... 2-4

2.3.1 Component side .............................................................. 2-4

2.3.2 Solder side ...................................................................... 2-5

2.4 Central Processing Unit (CPU) ................................................... 2-6

2.4.1 Installing the CPU ........................................................... 2-7

2.4.2 CPU heatsink and fan assembly installation ................... 2-9

2.5 System memory ......................................................................... 2-11

2.5.1 Installing a DIMM .......................................................... 2-12

2.6 Jumpers ...................................................................................... 2-13

2.7 Onboard LEDs ............................................................................ 2-16

2.9 Connectors ................................................................................. 2-17

2.9.1 Rear panel connectors .................................................. 2-17

2.9.2 Internal connectors ....................................................... 2-19

Chapter 3 BIOS setup 3-1

3.1 BIOS setup program .................................................................... 3-1

3.1.1 BIOS menu screen .......................................................... 3-2

3.1.2 Menu bar ......................................................................... 3-2

3.2 Main menu .................................................................................... 3-3

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-3

3.2.2 System Time [HH:MM:SS] .............................................. 3-3

3.3 Advanced menu ........................................................................... 3-4

3.3.1 ACPI Settings .................................................................. 3-4

3.3.2 Trusted Computing ......................................................... 3-4

3.3.3 CPUConguration .......................................................... 3-4

3.3.4 SATAConguration ........................................................ 3-5

3.3.5 USBConguration .......................................................... 3-6

3.3.6 NCT6791DSuperIOConguration ................................ 3-6

3.3.7 NCT5104DSecondSuperIOConguration ................... 3-7

3.3.8 NCT6791D HW Monitor .................................................. 3-7

3.3.9 Dynamic Digital IO .......................................................... 3-8

3.3.10 Power Management ........................................................ 3-8

3.4 Chipset menu ............................................................................... 3-9

3.4.1 SystemAgent(SA)Conguration ................................... 3-9

3.4.2 PCH-IOConguration ................................................... 3-10

3.5 Boot menu .................................................................................. 3-11

3.5.1 BootConguration ........................................................ 3-11

3.5.2 Boot Option Priorities .................................................... 3-11

3.6 Security menu ............................................................................ 3-12

3.7 Save & Exit menu ....................................................................... 3-14

Appendix

Notices .......................................................................................................A-1

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x Industrial Motherboard

1 x SATA Cable

1 x I/O Shield

1 x Support CD

If any of the above items is damaged or missing, contact your distributor or

sales representative immediately.

1.2 Features

• Intel

Socket 1150 for 4

Generation Core™ i7/Core™ i5 / Core™ i3, Pentium

/ Celeron

Processors up to 65W

• Two 204-pin Dual Channel DDR3 1600/1333MHz SO-DIMMs up to 16GB

• SATA 6.0 Gb/s x 2, SATA 3.0 Gb/s x 2, USB3.0 x 2, USB2.0 x 7, COM x 6

• PCI-Express[x4] x 1, Full-size Mini Card (PCIe + USB) with mSATA option (with

SATA 6Gb/s) x 1

• VGA, DVI, 18/24 bit Dual Channel LVDS supported

Chapter 1

Product overview

EMB-H81A

1-2

1.3 Specifications

SYSTEM

Form factor

Mini-ITX

CPU

LGA1150 socket for Intel

Generation Core™ i7 / Core™ i5 /

Core™ i3, Pentium

/ Celeron

processors

Supports Intel

CPU up to 65W

Memory

2 x SO-DIMM (8GB per DIMM), max. 16GB, non-ECC DDR3 1600

/ 1333 MHz

Dual-channel memory architecture

Chipset

Intel

H81 Express Chipset

I/O Chipset

NCT6791D & NCT5104D

Ethernet

2 x Realtek

8111F PCIe Gigabit LAN

BIOS

64Mbit Flash ROM, AMI BIOS

Wake on LAN

Yes (WOL/PXE)

Watchdog Timer

1~255 steps by software program

TPM

InneonSLB9635TT1.2

H/W Status Monitor

Monitors CPU/Chassis temperature

Monitors Vcore/5V/3.3V/12V voltages

Monitors CPU/Chassis fan speed

Smart Fan Control

CPU Fan/Chassis Fan

Power State

S3, S4, S5

Expansion slot

1 x PCI Express 2.0 x4 slot

1 x Full/Half-size Mini Card (USB+PCIe) with mSATA option (with

SATA 6Gb/s)

Battery

Lithium battery

Power requirement

1 x 24-pin ATX connector

1 x 4-pin ATX 12V power connector

Board size

6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)

Gross weight

1.1 lb (0.5 Kg)

Operating

temperature

F~140

F (0

C~60

Storage temperature

-40

F~185

F (-40

C~85

Operating humidity

0%~90% relative humidity, non-condensing

Power compliance

Compliant with Eup/ErP

Certificate

CE/FCC

(continued on the next page)

1-3

Chapter 1: General information

DISPLAY

Chipset

Intel

Graphics Media Accelerator

Resolution

Up to 1920x1200@60Hz for VGA

Up to 1920x1200@60Hz for DVI

Up to 1920x 1200@60Hz, Dual Channel 18/24 bit Support LVDS

Output interface

1 x DVI

1 x VGA

1 x LVDS

I/O

Storage

2 x SATA 6.0Gb/s ports

2 x SATA 3.0Gb/s ports

Serial port

1 x RS-232/422/485 supports 5V/12V/RI option at rear I/O

5 x RS-232 (1 x RS-232 at rear I/O, 4 x RS-232 at mid board)

Parallel port

SPP / EPP / ECP Mode

USB

2 x USB3.0 (rear panel)

7 x USB2.0 (3 ports at mid-board, 4 ports at rear panel)

Fan

1 x CPU Fan connector (4-pin)

1 x Chassis Fan connector (4-pin)

RTC

Internal RTC

Keyboard/Mouse

1 x PS/2 Keyboard / mouse port on rear I/O

Audio

Realtek ALC887,Mic-in/ Line-out

2 x Audio jacks (Mic-In, Line-Out)

1 x Front panel audio connector (supports AAFP)

Ethernet

2 x RJ-45 ports on rear I/O

Display

1 x VGA port on rear I/O

1 x DVI-I port on rear I/O

Others

1 x Front panel connector (Pin header)

1 x 8 bit Programmable Digital I/O

1 x AT/ATX mode selecter

EMB-H81A

1-4

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplugthepowercordfromthewallsocketbeforetouchingany

component.

• Beforehandlingcomponents,useagroundedwriststraportouchasafely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.

• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic

pad or in the bag that came with the component.

• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower

supply is switched off or the power cord is detached from the power

supply. Failure to do so may cause severe damage to the motherboard,

peripherals, or components.

EMB-H81A

2-2

EATX_PWR2 EATX_PWR1

COM1_V1

ALC

887

AAFP1

LVDS1

Super

I/O

MINICARD

CLRTC

17.0cm(6.7in)

DDR3_SO-DIMM_A1 (64bit, 204-pin module)

Intel

H81

DDR3_SO-DIMM_B1 (64bit, 204-pin module)

SATA6G_1

SATA6G_2

SATA3G_3

SATA3G_4

KBMS_USB89

AUDIO1

LAN1_USB3_1

LAN2_USB34

F_PANEL

LED1

LED2

BZ1

USB45

USB10

CPU_FAN1

CHA_FAN1

COM6COM5COM3COM4

DIO1

LGA1150

PCIEX4_1

LPT1

INV1

BATTERY

RTL

8111F

CHRONTEL

CH7511B

ASM

1442

RTL

8111F

ANX

988

Nuvoton

NCT5104D

DVI_I

VGA1

COM2

COM1

34 521 2 3

19 12

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place four screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION! Do not overtighten the screws! Doing so can damage the

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots

Page

COM1 Ring/+5V/+12V selection (COM1_V1) 2-14

ATX power connectors (24-pin EATXPWR, 4-pin EATX12V) 2-19

CPU and system fan connectors (4-pin CPU_FAN1, 4-pin CHA_FAN1) 2-20

Intel

LGA1150 CPU socket

2-6

DDR3 SODIMM slots 2-11

6. Inverter Back Light Control mode selection (3-pin J3) 2-15

7. LPT connector (26-1 pin LPT1) 2-25

8. Serial port connectors (10-1 pin COM3 ~ COM6) 2-25

9. Digital I/O connector (10-pin DIO1) 2-20

10. Clear RTC RAM (CLRTC) 2-13

11. System panel connector (10-1 pin F_PANEL) 2-22

12. Minicard connector (MINICARD) 2-24

13. Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1, SATA3G_2) 2-23

14. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1, SATA6G_2) 2-23

15. Standby Power LED (SB_PWR LED1) (SB_PWR LED1) 2-16

16. USB 2.0 connector (10-1 pin USB45, USB10) 2-24

17. LVDS panel voltage selection (3-pin J1) 2-14

18. Inverter voltage selection (3-pin J2) 2-15

19. LVDS connector (30-pin LVDS1) 2-21

20. Front panel audio connector (10-1 pin AAFP1) 2-21

21. Backlight inverter power connector (5-pin INV1) 2-22

EMB-H81A

2-4

2.3 Screw size

2.3.1 Component side

12.02

38.57

76.85

107.25

128.73

147.74

170.18

0.00

31.57

15.52

33.03

67.33

81.17

110.75

132.73

147.74

144.27

146.18

161.01

111.63

9.48

62.58

3.51

9.35

19.27

23.37

62.61

77.91

91.25

104.58

117.92

131.25

140.72

154.81

157.15

96.34

114.79

129.41

151.00

156.46

153.80

156.46

0.00

9.63

14.41

16.77

22.26

8.59

18.83

48.84

90.36

119.75

132.59

161.42

166.75

142.49

154.43

14.65

15.28

20.53

37.02

45.45

69.74

75.22

88.33

38.74

88.27

123.04

130.28

137.52

144.76

154.56

157.77

165.35

164.21

166.75

166.86

0.00

31.57

170.18

2-5

Chapter 2: Motherboard information

2.3.2 Solder side

6.35

25.69

36.77

97.79

100.70

163.83

114.16

144.66

25.69

6.35

36.77

100.70

163.83

10.16

33.02

52.8652.86

72.36

90.36

105.69

62.45

108.36

127.86

165.10

0.00

170.18

EMB-H81A

2-6

IMPORTANT: Unplug all power cables before installing the CPU.

CAUTION!

• Uponpurchaseofthemotherboard,ensurethatthePnPcapison

the socket and the socket contacts are not bent. Contact your retailer

immediately if the PnP cap is missing, or if you see any damage to the

PnP cap/socket contacts/motherboard components. The manufacturer will

shoulder the cost of repair only if the damage is shipment/transit-related.

• Keepthecapafterinstallingthemotherboard.Themanufacturerwill

process Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the LGA1150 socket.

• Theproductwarrantydoesnotcoverdamagetothesocketcontacts

resulting from incorrect CPU installation/removal, or misplacement/loss/

incorrect removal of the PnP cap.

2.4 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1150 socket designed for

the Intel® 4th Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium

/ Celeron

processors.

EMB-H81A CPU socket LGA1150

2-7

Chapter 2: Motherboard information

2.4.1 Installing the CPU

2 3

EMB-H81A

2-8

2-9

Chapter 2: Motherboard information

2.4.2 CPU heatsink and fan assembly installation

CAUTION! Apply the Thermal

Interface Material to the CPU

heatsink and CPU before you

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

3 4

EMB-H81A

2-10

To uninstall the CPU heatsink and fan assembly

2-11

Chapter 2: Motherboard information

2.5 System memory

This motherboard comes with two Double Data Rate 3 (DDR3) Small Outline Dual Inline

Memory Module (SO-DIMM) sockets. A DDR3 module has the same physical dimensions

as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket.

DDR3 modules are developed for better performance with less power consumption.

ThegurebelowillustratesthelocationoftheDDR3SO-DIMMsockets:

EMB-H81A 204-pin DDR3 SO-DIMM sockets

SO-DIMM_A1

SO-DIMM_B1

Channel Sockets

Channel A SO-DIMM_A1

Channel B SO-DIMM_B1

EMB-H81A

2-12

To remove a DIMM

2.5.1 Installing a DIMM

Page is loading ...

Aaeon EMB-H81A User manual

Brand: Aaeon

Model: EMB-H81A

Category: Motherboards

Type: User manual

Download PDF

report

Aaeon EMB-H81A User manual

Aaeon EMB-H81A User manual

Related papers

Other documents