TEAC DV223 User manual

Brand: TEAC

Model: DV223

Category: DVD players

Type: User manual

USER MANUAL

WARRANTY INFORMATION INSIDE. PLEASE READ

www.teac.com.au

IMPORTANT !

Trademark of TEAC Corporation JAPAN

“ For Optimum picture and sound quality,

please use TEAC Audio/Video cables ”

TEAC High Performance Audio/Video cables and connectors have

been designed to enhance your home entertainment experience.

HOME DVD PLAYER

DV223

Content

Introduction

Remote control unit

Connection to a TV

Connection to an audio system

Basic Playback

JPEG Playback

MP3 Playback

Setup Menu

Before Requesting Services

Specifications

Safety Precautions

Important Safety Instructions

Description

7-9

11-15

Introduction

AVIS

RISQUE CHOC ELECTRIQUE NE

PAS OUVRIR

THE DVD PLAYER IS A CLASS 1 LASERTHE DVD PLAYER IS A CLASS 1 LASER

Introduction

Please follow it strictly.

10.

11.

12.

13.

14.

15.

16.

17.

18.

42*12

CAUTION:

Do not touch the inner pins of the jacks or the rear panel. Electrostatic discharge may cause

Permanent damage the unit.

DESCRIPTION

Front Panel

Rear Panel

1. PLAY/PAUSE

2. OPEN/CLOSE

3. USB

4. POWER

1. Y,Pb/Cb,Pr/Pc

2. VIDEO

3. ML/MR

4. COAXIAL

5. S-VIDEO

12 3 4

345

USER MANUAL

WARRANTY INFORMATION INSIDE. PLEASE READ

www.teac.com.au

IMPORTANT !

Trademark of TEAC Corporation JAPAN

HOME D VD PLAYER

DV223

Owner's manual

Audio/Video cable .................... 1

Remote control ......................... 1

Owner's manual ........................ 1

Batteries .................................... 2.

ACCESSORIES

Remote control unit

POWER

NUMBER KEY 0-10

MUTE

N/P

SETUP

LEFT

ENTER

PLAY

DOWN

STOP

FAST FORWARD

FAST BACKWARD

A-B

REPEAT

ZOOM

CLEAR

PBC

DVD/USB

OPEN/CLOSE

SUBTITLE

ANGLE

LANGUAGE

PROGRAM

VIDEO

OSD

TIME

TITLE

RIGHT

RETURN

PAUSE

SLOW

L/R

RANDOM

STEP

VOL-/VOL+

METHOD 1 DVD Play + TV with Video input jack

S-Video input jack

Connections

Connection to a TV

METHOD 2 DVD Play + TV with

The following diagram shows examples of connections commonly used to connect the DVD player to TV sets

with other audio equipment.

Before Connecting the DVD player

z Be sure to turn off the power to all components in the system before connecting another component

z Refer to the instruction Manuals for your TV, stereo system and other components to be connected to the

DVD player.

z METHOD 2 DVD Player + Amplifier with Dolby Digital Decoder

CONNECTION TO AN AUDIO SYSTEM

METHOD 1 DVD Player + Stereo System

z When you want to play back DVD video discs,

turn on the TV and select the video input source

connected to the DVD receiver.

z When you want to enjoy the sound at the DVD

video discs or audio CDs from the audio system, turn

on the audio system and select the input source

connected to the DVD receiver.

z For connection details, see pages 5 and 6.

z Set the playback picture size according to the

aspect ratio of the connected TV at the SETUP menu

(TV Aspect).

z The DVD receiver turns on and the system

begin to work. Press POWER button on the

front panel. The power indicator will light on

and system is ready for playing. The power

indicator also light on when use the remote

control to turn the system on and standby

z Press the DVD/USB button on the remote

z Once the disc is in the tray, press OPEN /

CLOSE button to close the tray. Once closed.

the player will begin to play the disc.

z Place a disc on the disc tray with playback

side down.

z There are two different disc sizes. Place the

disc in the correct guide on the disc tray. If the

disc is out of the guide, it may damage the

disc and cause the DVD receiver to malfunction.

z Do not place anything except 3" disc or 5" disc

on the disc tray.

z Press STOP button once to stop playback and

show the logo screen. The player memorizes

the location where playback is stopped.

z Press PLAY button to resume playback from

the location where playback is stopped.

z When the STOP button is pressed twice, the

resume function will be cleared.

z Press PAUSE button once to pause playback.

The sound is mutted during PAUSE mode.

z Press PLAY button to resume normal

playback.

Press STEP button to pause playback.

z Press STEP button again to single step

forward to the nest picture frame.

z Press PLAY button to resume normal

playback.

z Press FWD button to fast forward through the

disc, The speed can be selected by pressing

the key further (2x, 4x, 8x, 16x, 32x, normal).

z Press PLAY button to resume normal

playback.

z Press REV button to fast reverse through the

disc The speed can be selected by pressing

the key further (2x, 4x, 8x, 16x, 32x, normal).

z Press PLAY to resume normal playback.

BASIC PLAYBACK

aration

Powering on the player and playing the disc / USB

aration

Pausing Playback

Single Stepping (VCD & DVD only)

Search Forward / Search Backward

to select your desired source.

z Press SLOW forward button to play a disc in

slow motion.

z Each time the SLOW forward button is pressed,

the slow motion speed changes {1/2,1/4,1/8,

1/16 of normal speed.)

z Press PLAY button to resume normal playback.

z Press NEXT button to skip forward to

the beginning of the next chapter (DVD) or

track (Audio CD).

z Press PREV button once to skip

backward to the previous chapter (DVD) or

backward to the previous truck (Audio CD).

z Press the DISPLAY button to check the

elapsed time and remaining time as illustrated.

1. You can enjoy and adjust sound volume level

(0-20 steps) simply by pressing VOLUME +/-

button on the remote control handset.

z Press REPEAT button to repeat the chapter,

Title and all for DVD disc; track and all for CD

disc

TITLE/ ALL repeat entire title

When playback reaches the end title of the disc,

playback resumes at the beginning.

CHAPTER - repeat current chapter

When playback reaches the end of the current

chapter, playback jumps back to the beginning of

the chapter.

TRACK - repeat current track

When playback reaches the end of the current track,

playback jumps back to the beginning of the track.

z Press A - B button once at the beginning of

the segment (point A) you want to play

repeatedly.

z Press A - B button again at the end of the

segment (point B).

z The player automatically

returns to point A and starts

repeat playback of the

selected segment (A B).

z Press A - B button a third

time to disable repeat A B

playback and allow playback

to continue in normal.

Slow motion Forwa

Skipping to the Next/Previous chapter/track

Checking the Remaining Time

SOUND MODE

REPEAT PLAY

Repeat Playback

z You can use the menus for the audio language.

subtitle language, etc. DVD menu contents

differ from disc to disc.

1. Press the DVD MENU button during playback.

The menu screen appears.

2. Use the up/down ( ) or left/right ( )

button to access the different features.

3. Press the ENTER button

z The selected item will play.

z For DVD's containing multiple titles, you can

view the title of each movie.

Depending on the disc, this function may either

not work at all, or may work differently.

z Press AUDIO button to select different audio

languages (eg. English, French, Spanish,

German …… depending on the number of

languages recorded on a DVD disc).

z Press SUBTITLE button to select different

subtitle languages (eg. English, French,

Spanish, German,.....depending on the number

of languages recorded on a DVD disc).

z Press ZOOM button repeatedly during

playback to select zoom 2x, 3x, 4x to change

the size of the picture.

z While an image is enlarged, you can use UP/

DOWN, LEFT / RIGHT burtons to shift the

view and display the part you wanted.

z Press the ANGLE button during playback to

select the desired angle.

z This function only works with discs on which

multiple scenes were shot from different angles.

z Press the TIME button.

z Each time the button is pressed, it repeats as

shown below.

z The player will jump to the desired location

immediately.

z In VCD2.0 playback. Press TIME button to

choose a search mode

(Disc Time/Track Time/Track Number)

z In CD or VCD discs, press TIME button and

enter the track number.

USING DISC MENU / TITLE

To select the disc menu

Using the Title Menu

AUDIO LANGUAGE / SUBTITLE

LANGUAGE (only applicable to DVD disc)

Selecting the Audio Language

Selecting the Subtitle Language

ZOOM (VCD or DVD only)

ANGLE

MOVIE TO A TITLE, CHAPTER OR

TIME DIRECTLY

Some CD-Rs may contain pictures in a JPEG

format. For example, you may have photographic

film developed with pictures stored in JPEG format.

Then you can playback those JPEG files in this

player.

Some useful features are described below:

z When you insert a disc with JPEG files, the

files or pictures available for playback will be

listed on the screen.

z Press UP / DOWN buttons to select the folder

or file and press ENTER.

z After you open one JPEG file, each

subsequent file will appear automatically for a

few seconds.

To keep the JPEG image on the screen longer,

press PAUSE button to pause the image,

z During playback, press UP / DOWN, LEFT /

RIGHT to rotate or flip the image.

z During playback, press STOP button. Press

UP/ DOWN buttons to select PREV or NEXT,

then press ENTER.

z Press UP/ DOWN buttons to select the picture,

then press ENTER and it will shift to slide show

mode starting with the picture selected.

This system has a built in MP3 decoder. You can

playback MP3 tracks (files) recorded on CD-R.

CD-RW.

z It is recommended you turn on you TV when

playing back an MP3 disc.

1. press the OPEN/CLOSE button to load a disc.

The menu will show up the folders and the files

in root directory.

2. Use the buttons to select the desired

music folder, then press ENTER.

3. Use the buttons again to select a song

file. Press ENTER to begin playback of the

song file.

The indication corresponding to the selected

mode appears on the TV screen.

1. Use the LEFT/RIGHT and up/down buttons

to select play mode.

2. Use the buttons to select the desire

music folder, then press ENTER.

3. Use the buttons to select the

song file, then press ENTER.

NOTE:

A. FOLDER

All the files in the current folder will be

played once in sequence.

B. REPEAT ONE

Theselectedfilewillberepeated.

C. REPEAT FOLDER

All the files in the current folder will be

repeated.

JPEG Playback

MP3 Playback

Starting playback

Play mode

D. DISCLAIMER:

We cannot guarantee compatibility

(operation and/or bus power) with all USB

mass storage devices and assumes no

responsibility for any loss of data that may

occur when connected to this unit.

With large amounts of data, it may take

longer for the system to read the contents

of a USB device.

Some USB devices may not be properly

recognized.

Even when they are in a supported format,

some files may not play or display

depending on the content.

1 With the player switched on, press

DVD/USB.

The SETUP MENU let you to customize the DVD

player by allowing you to select various language

preferences, set up a parental level, turn captions

and screen saver on and off, adjust what type of

television screen you have and more. Below, find

the menu, and then find the corresponding page

that describes the features of the selected menu option.

1. When you press SETUP button on the remote

control, the SETUP MENU will be displayed.

2. Within the SETUP MENU, you can use

and buttons on the remote control to

move the cursor and then press the ENTER/PLAY botton to

make your selection. Press can return the previous

menu.

3. To exit SETUP MENU, you can press Setup button again.

Select GENERAL SETUP in the SETUP MENU

and then select the desired option using the cursor

( ) buttons to navigate through the menus/

screens and press the ENTER button to select.

NORMAL/PS: Pan scan. Select when the unit is

connected to a conventional TV. Video material

formatted in the Pan Scan style is play back with

the left and right edges are cut off.

NORMAL/LB: Letter Box. Select when the unit is

connected to a normal TV. Wide-screen images are shown

on the screen with a black band at the top and bottom.

WIDE: Select when the unit is connected to a wide-screen

Note:

The displayable picture size is preset on the DVD

disc. Therefore the playback picture of some DVD

discs may not conform to the picture size you select.

Some DVDs include scenes recorded from different

angles. This selection can show the marking.

You can set the SETUP and on-screen messages

to appear in English. This language

This option can show or hide the captions.

- ON (show captions)

- OFF (hide captions)

Note: This function can only be used for DVD disc

with captions.

The TV set must support closed captions

function.

Setup Menu

GENERAL MENU

TV Display

Angle Mark

On-Screen Display Language

Captions

selection will

not affect the languages of DVD disc

or Title menus

or any audio or subtitle languages.

Screen Saver

Select speaker setup in the setup up menu and

then select the desired option using the curs

or ( ,

) buttons to select the desired option and

press the ENTER button to select

LT/RT

A disc recorded multi channel soundtrack, the

output signal will be incorported to left and right

channel.

STEREO

A disc recorded multi channel soundtrack, the

output signal will be incorported to stereo.

Screen Saver

SPEAKER SETUP

Downmix

z Press or to select SPDIF output, then

press ENTER.

z Press or to select OFF, RAW, or PCM,

then press ENTER.

z Choose OFF if no external audio equipment is

connected.

z Select RAW if the player is connected to a 5.1

home theatre system by a coaxial cable (not

supplied).

z Select PCM to enable the internal Dolby Digital

decoder of this player.

SPDIF OUTPUT

This is the output mode of the L and R signals of

the set audio output. If it is set to "MIX MONO', the

function only works when the DVD being played is

2.0 channel.

z STEREO

- Choose this option, the audio output should be

dummy stereo signal.

z L-MONO

z R-MONO

z MIX-MONO

Dual Mono

Dynamic Range Compression reduces volume

changes by letting you adjust the difference between

soft and loud sounds.

Press or to set Dynamic Range higher dynamic

sound will be produced if dynamic range is selected.

Select VIDEO SETUP in the setup menu then press

ENTER button.

Dynamic Range Compression

VIDEO SETUP

z Press or to select sharpness, brightness,

contrast then press button.

z Press to go back and select another picture

setting as needed.

when COMPONENT mode is "YUV', the 'TV Mode" is

effective

For sharpness, choose high, medium, Iow 3 different

levels.

For BRIGHTNESS, the range is -20 to +20.

For CONTRAST, the range is -16 to +16.

TV type will be selected. Press .

z Press or to select PAL, MULTI or NTSC

then press ENTER.

- Choose PAL if your TV is PAL -compatible.

- Choose MULTI if you want the player to

automatically select the color system of the

current DVD. The TV system setting must be

MULTI.

TV Type

Choose PAL if your TV is PAL -compatible.

Audio will be selected, Press .

- Press or to select the desired audio

language and then press ENTER.

Subtitle will be selected. Press .

- Press or to select the desired subtitle

language and then press ENTER.

Audio

Subtitle

Disc menu will be selected. Press .

Press or to select the desired disc menu

language and then press ENTER.

Disc Menu

Parental lock will be selected. Press .

- Press or to select a parental control level

(1-8), then press enter or select off to completely

turn off the parental controls.

- Press the number buttons to set password by

yourself, then press ENTER.

You cannot play DVD discs rated higher than the

level you selected unless you cancel the parental

lock function.

Parental control levels

Notes: Parental control is a relatively new feature

encoded

Parental control limits viewing of DVDs when a

DVD has movie rating that exceeds the parental

level you selected.

To adjust the PARENTAL level so that DVDs cannot

be played if the level has exceed, see PARENTAL

CONTROL LEVELS. Press and to select

password, CHANGE will be highlighted and then

press ENTER.

z A box beside OLD password will be highlighted.

z Press the number buttons to enter your Old 4-

digit password. The box beside NEW password

will be highlighted automatically.

RATING EXPLANATIONS

z KID SAF - Kid safe; it is safe even for kids.

z G - General Audience; recommended as

acceptable for viewers of all ages.

z PG - Parental Guidance suggested.

z PG 13 - Material is unsuitable for children

under age 13.

z PG-R - Parental Guidance-restricted;

recommended that parents restrict children

under age 17 from viewing or allow children

to view only when supervised by a parent or

adult guardian.

z R - Restricted, under 17 requires

accompanying parent or adult guardian.

z NC-17 - NO children under age 17; not

recommended viewing for children under age

17.

z ADULT - Mature material; should be viewed

only by adults due to graphic sexual material,

violence, or language.

Parental control Password

z Press the number buttons to enter new 4-digit

password of your choice. The box beside

CONFIRM PWD will be highlighted

automatically.

z Press the number buttons to enter the same

new 4-digit password you just entered for the

NEW PASSWORD.

z Press ENTER to save the new password.

NOTES: When first time to use this DVD player,

"OLD PASSWORD" just press ENTER to bypass.

Enter the NEW PASSWORD for this DVD player.

To restore the original settings of the player, follow

the steps below.

Press and to select DEFAULT.

RESET will be highlighted. Press ENTER.

z The original settings of the player will be

restored.

To clear 4-digit password if you forget your

password, follow the procedure below.

1. At the change page enter 4-digit number

"8888 - (DEFAULT PASSWORD) and

then press ENTER.

2. Enter a new password.

Default

into DVD discs.

Check the following guide for the possible cause of a problem before contacting service.

Symptom Correction

No power Plug the power cord into the wall outlet securely.

No picture z SelecttheappropriatevideoinputmodeontheTVso the

picture from the DVD player appears on the TV screen.

z Connect the video cable into the jacks securely.

z Turn on the TV

NO sound z Check audio connections.

z If you are using a HiFi amplifier, try another sound source.

The playback picture is poor z Clean the disc.

z Correct the TV / DVD player colour system.

The DVD player does not start playback

z Insert a disc, if no disc inside the player.

z Insert a playable disc. (Check the disc type and color system

z Place the disc with the playback side down.

z Clean the disc.

z Cancel the Rating function or change the rating level.

Severe hum or noise is heard. z Wipe them with a cloth slightly moistened with alcohol.

z Clean the disc

z Connect the speakers and components securely.

z Move your TV away from the audio components.

The remote control does not work properly. z Point the remote control at the remote sensor of the DVD

receiver.

z Operate the remote control within about 5m.

z Remove the obstacle.

z Replace the batteries with new ones.

Completely distorted picture or no colour If the picture is distorted completely or if the picture rolls vertically,

make sure the NTSC/PAL setting at the DVD player matches the

colour system of your television.

The icon appears on screen z The DVD's software restricts it.

z The DVD's software doesn't support the feature (eg., angles).

z The feature is not available at the moment.

Before Requesting Service

Specification are subject to change with out notice. Weight and dimensions are approximate.

Video Format

DVD Audio, Super Video CD, Video CD, CD-DA, HDCD,

CD-ROM

Audio Format MPEG1, LAYER1, LAYER2, LAYER3

Signal output Color System: PAL/NTCS/AUTO

Audio System: DOLBY DIGITAL down mix stereo

DOLBY DIGITAL digital output

Audio DAC 24bit/96kHz

Video Output: 1Vpp(at 75 ohm)

Audio Output(stereo): 2Vpp

Frequency

Response

CD: 20Hz-20KHz(EIAT)

DVD: 20Hz-22KHz(48K)

20Hz-44KHz(96K)

S/N ratio ˚90db

THD ˘0.05%

Output

Terminate

Video(composite) output

S-video output

Component Video(Y Pb Pr) output

Digital Audio output:coaxial

Down mix(L/R)

Power Input

~110 - 240V 50/60Hz

20W

Dimension 200mm(L)*200mm(W)*38mm(H)

SPECIFICATIONS

Power consumption

AVI, MP3, JPEG,DVD Video.

USB max supported size

8GB

max support resolution for AV

no limited

file size for AVI

PAL 720*576

NTSC 720*480

TEAC CUSTOMER CARE CENTRE (TCCC)

Free call: 1800 656 700

Between Monday to Friday – EST 9AM to 5PM

TEAC DV223 User manual

Brand: TEAC

Model: DV223

Category: DVD players

Type: User manual

Download PDF

report

TEAC DV223 User manual

TEAC DV223 User manual

Related papers

Other documents