TEAC DV228 User manual

TEAC
Brand
TEAC
Model
DV228
Category
DVD players
Type
User manual
DV228
purchaser's
except cabinet, front panel, knob, removable accessories
owner's
of TEAC
cabinet
getting hit.
damage to the unit, please
Where the main plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
skin or eyes
Do not place the player in the following positions:z
emitting
Reads picture CDs to display a photo slideshow.
cause
high quality sound
options.
Various display options available for different screens and video chapter
navigation.
If the air humidity is very high, don't put the unit in dusty places.
Collected dust may cause the unit to fail.
Don't place the DVD player on beds, sofas, rugs or similar places
where ventilation and heat dissipation is easily blocked.
extend
containers
USB playback supported file formats: JPEG, MP3, WMA, AVI
USB PORT
DV228
V-MODE
CLEAR
SLOW
STEP
DEFAULT
USB COPY
-
+
ACCESSORY LIST
connections
a. For a basic composite AV connection, use AV cables with RCA plugs. Connect the yellow plug to the video jack, the white plug to the
white audio (L) jack, and the red plug to the red audio (R) jack.
b. For a component AV connection, use the YPbPr jacks.
c. To use S-Video, the TV must also have an S-video input jack. Use a S-Video cable to connect both devices.
d. To use digital sound output, use a coaxial audio cable to connect to the COAXIAL audio output jack.
NOTE: If a USB flash drive is connected while no disc is loaded in the player, the player will read the USB drive automatically and start file playback.
During disc playback, press the OSD key on the remote control to
view the following information displays:
Press the FWD key to fast forward playback and cycle through
the following speeds: 2x, 4x, 8x, 16x, 32x
Press the REW key to fast rewind playback and cycle through
the following speeds: 2x, 4x, 8x, 16x, 32x
The player will start looping playback from A-B.
Pressing the A-B key for the third time will cancel the looping playback.
To play media from a USB flash drive, connect the USB drive to the USB
port at the side of the unit. Press the USB/DVD button to enter USB
Mode. The player will read the drive and start playback automatically.
Press STOP to return to the file/folder view if you wish to choose a
different file or file type.
to start
press it again to switch the
sound back on.
Widescreen
a desired language.
"Last Memory" is a function that remembers where the most recent
playback was stopped at. Turn it On/Off according to the figure below:
This menu allows a selection of preferred disc menu languages. If the
selected disc menu language is available on the disc, it will be displayed.
to select
English
This menu allows a selection of preferred audio languages. If the selected
audio language is available on the disc, it will be played during playback.
This menu allows a selection of preferred subtitle languages. If the selected
subtitle language is available on the disc, it will be displayed during playback.
A film rating threshold can be set so that more mature rated DVDs
will require a password to be played.
Select "Reset" to reset all settings to the default factory settings.
DV228
255 x 38 x 190 mm
AVI
AVI
AVI
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

TEAC DV228 User manual

TEAC
Brand
TEAC
Model
DV228
Category
DVD players
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents