Bush NE-2059 User manual

NE-2059

2

If you require any technical guidance or find that your product is not

operating as intended, a simple solution can often be found in the

Troubleshooting

You’ll soon be enjoying your new DAB/FM Radio.

It all begins here, with your instructions. Don’t worry,

there’s nothing too technical coming up. Just simple,

step-by-step guidance to get you up and running

quickly. Sound good? Then let’s get started.

Help and Guidance

We’re here to help you get the most from your DAB/

FM Digital Radio. Should you require any guidance, a

simple solution can often be found online at:

www.bush-support.com

If you still require further assistance, call one of our

experts on 0345 604 0105.

3

Contents

1

2

3

4

5

Safety information

Safety information 6

Getting to know your DAB/FM Radio

Ready? Let’s begin 12

Product Overview 12

First Charge / Recharge The Battery 14

Using your DAB/FM Radio

POWER SOURCE 18

Basic Operation 20

DAB Operation 23

FM Operation 29

Sleep Function 33

Backlight Function 34

Factory Reset 35

Software Version 36

Using Earphones 36

Reset Function 37

Other information

Specifications 40

Product support

Help and assistance 43

Disposal 45

Guarantee 47

section of these instructions, or online at www.bush-support.

com If you still require further assistance, call one of our experts

on 0345 604 0105

Safety information

1

6

Safety information

Important - Please read these instructions fully

before installing or operating

SAFETY PRECAUTIONS

- Read all the instructions carefully before using the

unit and keep them for future reference.

- Check that the voltage marked on the rating label

matches your mains voltage.

- The unit must be placed on a flat stable surface

and should not be subjected to vibrations.

- Do not place the unit on sloped or unstable

surfaces as the unit may fall off or tip over.

- The mains socket must be located near the unit

and should be easily accessible.

- Avoid extreme degrees of temperature, either

hot or cold. Place the unit well away from heat

sources such as radiators or gas/electric fires.

Avoid exposure to direct sunlight and other

sources of heat.

- Never place any type of candle or naked flame on

the top of or near the unit.

- To reduce the risk of fire, electric shock or product

damage, do not expose this unit to rain, moisture,

dripping or splashing. No objects filled with liquids,

such as vases, should be placed on the unit.

- If you spill any liquid into the unit, it can cause

serious damage. Switch it off at the mains

immediately. Withdraw the mains plug and consult

your dealer.

7

Safety information

Important - Please read these instructions fully

before installing or operating

- To prevent the risk of electric shock or fire hazard

due to overheating, ensure that curtains and other

materials do not obstruct the ventilation vents.

- Do not install or place this unit in a bookcase,

built-in cabinet or in another confined space,

ensure that a minimum of 10cm should be kept

around the apparatus for ventilation.

Safety

- Always disconnect the unit from the mains supply

before connecting/disconnecting other devices or

moving the unit.

- Unplug the unit from the mains socket during a

lightning storm.

- This unit will become warm when used for a

long period of time. This is normal and does not

indicate a problem with the unit.

8

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the unit’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock.

The exclamation point within an equilateral

triangle is intended to

alert the user to the presence of important

operating and maintenance (servicing)

instructions in the manual accompanying

the unit.

Interference

- Do not place the unit on or near appliances which

may cause electromagnetic interference. If you do,

it may adversely affect the operating performance

of the unit, and cause a distorted sound.

Safety information

Important - Please read these instructions fully

before installing or operating

9

Supervision

- Children should be supervised to ensure that they

do not play with the unit.

- Never let anyone especially children push anything

into the holes, slots or any other openings in the

case - this could result in a fatal electric shock.

Service/Maintenance

- To reduce the risk of electric shock, do not

remove screws. The unit does not contain any user

serviceable parts. Please leave all maintenance

work to qualified personnel.

- Do not open any fixed covers as this may expose

dangerous voltages.

- Ensure to unplug the unit from the mains socket

before cleaning.

- Do not use any type of abrasive pad or abrasive

cleaning solutions as these may damage the unit's

surface.

- Do not use liquids to clean the unit.

Safety information

Important - Please read these instructions fully

before installing or operating

Getting to know your

DAB/FM Digital Radio

Getting to know your

DAB/FM Digital Radio

2

12

Getting to know your DAB/FM Radio

You’ll be up and running in no time

Ready? Let’s begin...

Please read these instructions carefully. They contain

important information which will help you get the

best from your product and ensure safe and correct

installation and operation.

If you require any further assistance, our technical

experts are happy to help. For full details, refer to

the product support section at the end of these

instructions.

Product Overview

Front view

1. DISPLAY

2. MODE BUTTON

3. MENU/INFO

BUTTON

4. VOL+ BUTTON

5.

◄

BUTTON

6. VOL- BUTTON

7. PRESET BUTTON

8. SCAN BUTTON

9. ENTER BUTTON

10.

►

BUTTON

13

Getting to know your DAB/FM Radio

You’ll be up and running in no time

Bottom viewRight view

11. POWER/HOLD BUTTON

12. HEADPHONE JACK

13. DC INPUT JACK

14. RESET BUTTON

15. Earphones

14

Getting to know your DAB/FM Radio

You’ll be up and running in no time

FIRST CHARGE / RECHARGE THE

BATTERY

The unit has a built-in rechargeable Lithium (Li)

battery. The battery is charged automatically

whenever the unit is connected to a computer

or USB charging device with the USB cable (USB

charging device & USB cable are not included). When

the unit is switched on, the screen display will show

a charging symbol to indicate the unit is in charging.

The charging symbol will appear full when finished.

- Do not put the unit under high temperature

or heat sources.

- During battery operation, if the battery

becomes flat, the display will show Battery

Low, you should recharge the battery for

operation.

- The unit support computer charging and

5V 1A charging device (not included),

connecting the unit to any other power

source may cause damage the unit.

15

Getting to know your DAB/FM Radio

You’ll be up and running in no time

- During battery operation, the POWER

button will work as a POWER ON/OFF

button. The display will be totally off when

the radio is powered off. The display

backlight will be full brightness after radio

power on, and it will turn to dim after a few

seconds.

- It takes 3 hours (approx.) to fully charge the

battery.

- A fully charged unit has up to 10 hours

(approx.) of playback time at 1/2 volume

level.

Using your

DAB/FM Radio

3

18

Using your DAB/FM Radio

Let’s get started

POWER SOURCE

Mains Power

1. Connect the unit to a micro USB power adapter

(not included) using a micro USB cable (not

included).

2. Unwind the micro USB cable to its full length.

3. Connect the end of the micro USB cable to the

DC IN Socket at the bottom of the unit and then

connect the micro USB adapter to the mains

socket. Make sure the micro USB adapter is firmly

inserted into the main socket. The unit is now

ready to use.

4. To switch the unit off completely, unplug the

mains plug from the mains socket.

The unit use 5V 1A micro USB power adapter,

connecting the unit to any other power

source may cause damage the unit.

19

Using your DAB/FM Radio

Let’s get started

Battery Power

1. Connect the micro USB cable to the DC IN

socket on the unit. Connect the micro USB power

adapter to the mains socket.

2. Battery will automatically start charging.

3. To check the charged capacity, switch on the unit

and press the MENU/INFO button repeatedly in

ON mode until the display shows <charging #>.

4. Remove the micro USB cable when the battery is

fully charged.

- When the radio is connected to the mains

and in use, the battery will be recharged

but at a much slower rate.

- Do not disconnect the mains power

adapter during charging.

- Do not put the unit near high temperature

or heat sources.

- During battery operation, if the battery

becomes flat, the display will shows

Battery Low, you should change to AC

operation and recharge the battery.

20

Using your DAB/FM Radio

Let’s get started

- During battery operation, the POWER/

HOLD button will work as a POWER ON/

OFF button. The display will be totally off

when the radio is powered off. The display

backlight will be at full brightness after

radio power on, and it will dim after a few

seconds.

- It takes 4 hours (approx.) to fully charge

the battery.

- A fully charged unit has up to 10 hours

(approx.) of playback time at 1/2 volume

level.

BASIC OPERATION

Powering ON/OFF

After connecting the micro USB adapter to the unit and

the mains socket, the unit will enter Standby mode.

1. Slide the POWER/HOLD button to switch on the

unit.

2. Slide the POWER/HOLD button again to switch

the unit back to Standby mode.

3. Disconnect the power cable of the mains adapter

from the mains socket if you want to switch the

unit off completely.

Page is loading ...

Bush NE-2059 User manual

This manual is also suitable for

Bush NE-2059 User manual

Related papers

Other documents