Savoy House 7-1690-1 User manual

Bulb

(NOT Included)

Socket

Shade (3)

Glass (4)

OR Ball Nut (2)

Stem

Canopy (1)

ITEM NO.: 7-1690-1

ASSEMBLY INSTRUCTIONS

1. Carefully unpack and identify all parts referring to illustration for parts identification.

2. Turn the power to the installation point OFF.

3. Determine the desired height at which the pendant will be installed and select the stems.

4. Thread the wire through the stems and thread the first stem onto the nipple (5), longest stem first. Repeat

process until all required stems are thread together.

5. Refer to the additional installation instructions included with the product for wiring and installation.

6. Install the canopy (1) to the ceiling using the ball nut (2).

7. Install proper bulbs (not included) into each socket referring to the markings and/or labels on the fixture for

maximum wattage.

8. Align grooves on glass (4) with bumps on the inside of shade (3) -push up and twist clockwise. Be sure

glass is secure before releasing.

9. Restore power to the installation point and retain this sheet for future reference.

Nipple (5)