Savoy House 7-1696-5 User manual

OR Ball Nut (2)

Stem

Canopy (1)

BOTTOM VIEW

Glass (6)

Barrel Knob (8)

Rubber Washer (5)

Bracket (4)

Ball Nut (3)

Fixture Body (7)

Socket

Bulb (NOT Included)

Nipple (9)

Frame (10)

Pipe (12)

Fixture Body (7)

ASSEMBLY INSTRUCTIONS

1. Carefully unpack and identify all parts referring to illustration for parts identification.

2. Turn the power to the installation point OFF.

3. Secure the glass (6) using the barrel knob (8), rubber washer (5), bracket (4), and ball nut (3) onto the

fixture body (7).

4. Install the pipe (12) onto the fixture body (7). Install the frame (10) onto the fixture body (7) with

screw (11). Install the nipple (9) onto the pipe (12).

5. Determine the desired height at which the pendant will be installed and select the stems.

6. Thread the wire through the stems and thread the first stem onto the nipple (9), longest stem first.

Repeat process until all required stems are thread together.

7. Refer to the additional installation instructions included with the product for wiring and installation.

8. Install the canopy (1) to the ceiling using the ball nut (2).

9. Install proper bulbs (not included) into each socket referring to the markings and/or labels on the

fixture for maximum wattage.

10.Restore power to the installation point and retain this sheet for future reference.

ITEM NO.: 7-1696-5

Screw (11)