2. Medifab
  3. HERO-NXT
HERO-NXT

Medifab HERO-NXT User guide

  • Hello! I am an AI chatbot trained to assist you with the Medifab HERO-NXT User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Distributed by
Hero
SAFETY FEATURES
Swivellin special
purpose car seat
for forward or
rear-facin
Ensure the HEAD SUPPORT
is adjusted as your child
grows taller
POSTURAL SUPPORTS
should be adjusted to
ensure eective support
to suit your child’s needs
Use the TILT HANDLE
to ensure adequate
tilt setting is applied
to help protect your
child’s head and neck
Damping bracket has
TWO ANGLE SETTINGS
- ensure this is adjusted
to suit the vehicle
RED INDICATOR STRIPS
show when ISOFIX, swivel,
or support leg aren’t engaged.
This means it is not safe to travel
QUICK CHECK FITTING GUIDE
Distributed by
Contact the car seat specialists for more information:
0800 543 343
[email protected]
Installation
• The Hero should be installed in the back seat of a vehicle
• There are 3 mandatory points of installation:
– Enaed ISOFIX system
– The support le must be extended to the appropriate
lenth to suit the vehicle. The le must be in contact
with the floor of the footwell
– Dampin bracket set to be in contact with vehicle backrest
• The vehicle 3 point seatbelt is not required for installation or use
• Install the child seat in the car in such a way that it is not
trapped by the front seat or the vehicle doors
Use
• Before each journey, check the ISOFIX is secured, support le
in place, and dampin bracket is in the correct position.
Ensure the swivel is also locked
• Place the child in the car seat, ensurin the shoulder straps
are in line with the top of the shoulders
• Ensure the buckle is done up at the front of the child, you
should hear an audible click
• The harness should then be tihtened usin the rey strap
at the front of the seat to ensure a supportive and snu fit
• The harness webbin must not be twisted or trapped and
must be completely tihtened
• If required, use the rey button on the side of the base to
swivel the Hero.
• Ensure child has not outrown the weiht capacity which is
18k. If child is approachin this weiht limit, consider review
of their safe transport plan
• Periodically check for loose or missin parts
Hero
Distributed by
The quick reference guide does not replace the requirement to read the user manual and safety information therein.
Ensure damping bracket is in contact
with the vehicle seat back
Ensure harness is secured and shoulder
straps are at correct height
Check ISOFIX connection and
support leg are engaged and
locked before travel
Ensure child has not outgrown
the weight capacity limit
18kg
QUICK CHECK FITTING GUIDE
/