Memphis MMD1 Operating instructions

INSTRUCTIONS:

Clean and dry application surface with included wet and dry

cloths.

Remove backing from mounting bracket and press firmly onto

mounting surface.*

Remove backing from the metal circle that best fits your

device. Press adhesive side of metal circle firmly onto the

back of your mobile device.

Make sure phone is mounted in a safe location while the car

is in drive.

Take note of where vehicle shift lever will be while car is in

drive.

This device will not deactivate your credit card or damage

your mobile device.

*The 3M backing strip is intended to mount to smooth surfaces. Certain textured surfaces may

impair the device from properly bonding. It is recommended that the device be mounted to a

smooth hard surface like a window or a dashboard.

MMD1

MAGNETIC MOUNTING DEVICE