2. Memphis
  3. MMD1
MMD1

Memphis MMD1 Operating instructions

  • I have reviewed the instructions for the MEMPHIS MMD1 magnetic mounting device. This document provides details on how to install the mount, including using the provided cleaning cloths, and instructions to attach the bracket and metal circle. I understand that this device should be mounted on a smooth surface and that it is safe for your phone and credit cards. I'm ready to answer any questions you have about these instructions.
  • What should I use to clean the mounting surface?
    How do I attach the mounting bracket?
    Where should I apply the metal circle?
    Where should I mount my phone in the car?
    Can this device damage my credit card or mobile device?
INSTRUCTIONS:
Clean and dry application surface with included wet and dry
cloths.
Remove backing from mounting bracket and press firmly onto
mounting surface.*
Remove backing from the metal circle that best fits your
device. Press adhesive side of metal circle firmly onto the
back of your mobile device.
Make sure phone is mounted in a safe location while the car
is in drive.
Take note of where vehicle shift lever will be while car is in
drive.
This device will not deactivate your credit card or damage
your mobile device.
*The 3M backing strip is intended to mount to smooth surfaces. Certain textured surfaces may
impair the device from properly bonding. It is recommended that the device be mounted to a
smooth hard surface like a window or a dashboard.
MMD1
MAGNETIC MOUNTING DEVICE
/