Streamline CCTV-POLE-KIT0003-051 User manual

Brand: Streamline

Model: CCTV-POLE-KIT0003-051

Type: User manual

The Streamline CCTV-POLE-KIT0003-051 is a wireless camera system with a 5-inch LCD monitor and a bullet camera, designed for various monitoring applications. It features a 2.4GHz wireless connection with 8 channels, allowing for clear and stable transmission of video and audio signals. The camera has a built-in microphone for audio recording, and its infrared LEDs provide night vision capabilities with a range of up to 8 meters. Additionally, the motion detection function triggers recording when movement is detected, enhancing security and saving storage space.

INSTRUCTION

MANUAL

STREAMVAC

CCTV-POLE-KIT0003-051

CCTV-POLE-KIT0003-032

Codes:

INSTR-CCTV-POLE-KIT0003

™

2 3

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

1Why STREAMLINE®?

• STREAMLINE® systems can be built according to customers’ exact requirements

• For non-standard systems, the user’s needs or speciﬁcations are listened to and turned

into reality.

• Whilst price is important, quality is remembered long after price is forgotten

• We insist on sourcing brand name products from around the world, only of a reputable

quality, and bring them together under the STREAMLINE® name

• All STREAMLINE® products carry a full one year’s warranty, according to the manufacturers’

standard terms and conditions of sale.

• We have an in-house technical helpline able to answer most of your questions relating to the

capabilities and functionalities of all STREAMLINE® products

• If we get it wrong, we will put it right. If you are sent a wrong item, we will immediately

attend to sending you the correct item and arrange a collection of the wrong item without

any quibbles

• STREAMLINE® is backed by a comprehensive range with massive stocks providing you with a

‘one stop shop’ for all your requirements.

Flexibility

Quality

Service

Why STEAMLINE®?

MANUFACTURED

IN THE

UNITED KINGDOM

CHECKED AND

TESTED BY

QUALITY CONTROL

Contents

1. Why STREAMLINE®?

2. Warranty Information

3. About Your System

4. Basic Monitor Operation

5. Additional Information & Motion Detection

Buttons & Interface

Camera Speciﬁcations

Monitor Speciﬁcations

Taking Photo & Video

Viewing Photos and Videos

5 - 6

7 - 8

11 - 18

STREAMVAC

™

4 5

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

Battery capacity symbols:

Display Symbols:

STREAMLINE® Warranty

The warranty on all Machines and Equipment is

for 1 year (12-months) from RECORDED DATE

OF PURCHASE.

THIS WARRANTY EXCLUDES NORMAL

MAINTENANCE ITEMS, including but not limited

to HOSES, FILTERS, O-RINGS,

DIAPHRAGMS, VALVES, GASKETS,

CARBON BRUSHES and damage to motors

and other components as a result of failure to

replace normal maintenance items. THIS LIST

IS NOT EXHAUSTIVE.

If STREAMLINE® receives notice of such defects

during the warranty period, STREAMLINE®

will either, at its opinion, repair or replace

components which prove to be defective.

Replacement parts will only be supplied under

warranty, upon the inspection and approval of

the defective parts by STREAMLINE®.

Should it be necessary to supply replacement

parts before the opportunity to inspect, these

will be charged at current prices and credit will

only be issued upon subsequent inspection and

warranty approval by STREAMLINE®.

The customer is responsible for the cost of

return of the defective part. If warranty is

approved, STREAMLINE® will pay for the cost

of the repaired or replacement part.

This warranty excludes the following conditions

and circumstances which are at the discretion

of STREAMLINE®:

Wear and tear, misuse, abuse improper

maintenance, frost damage, the use of chemicals

other than those supplied or approved by

STREAMLINE®, improper installation or repair,

unauthorised modiﬁcation, incidental or

consequential costs, loss or damage, service,

labour or third party charges, the cost of

returning defective parts to STREAMLINE®.

This warranty constitutes the exclusive remedy

of any purchaser of a STREAMLINE® unit and

is in lieu of all other warranties, express or

implied, including without limitation any implied

warranty of merchantability or ﬁtness for use, to

the fullest extent permitted by law. In no event

shall any implied warranty of merchantability or

ﬁtness for use exceed the term of the applicable

warranty stated above and STREAMLINE® shall

have no other obligation or liability.

Important

Unfortunately these rights cannot be

transferred to a third party.

2 2

STREAMLINE® Warranty About Your System

• Do not use or store the camera or monitor in high temperature or high humidity or

damp environment.

• Avoid direct sunlight for long periods.

• Do not use a SD card larger than 32GB

• Insert and remove the SD card only once the power of the monitor is switched o.

• When inserting the SD card, please make sure that the in sertion direction is

correct. Failure to do so will damage the card slot. (See icon on the rear of the monitor)

• Do not attempt to remove the battery of either the camera or monitor.

Buttons & Interface

The possible reason for the Monitor not powering up, is that the battery is depleted. Plug the

charging wire into the USB port on the monitor and connect it to a mains voltage supply.

The battery charger supplied is for the Monitor use only. Do not leave the charger in a humid place.

Unplug the charger after use.

Before using the Monitor for the ﬁrst time, charge it for between 6 – 10 hours.

The new battery will reach best performance after charging and discharging several times,

If the camera is not used for long periods, it is recommended to charge the monitor every

2-3 months.

STREAMVAC

™

6 7

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

Bullet Camera

Ensure that the camera battery is fully charged prior to operation. Once fully charged the

battery will have a 1.5 hour working time.

Charging

Charge the camera battery, for approximately 1½ hours, using the mains charger supplied with the

kit. Whilst charging, the red indicator LED, in the front of the camera, will illuminate. When fully

charged, the red indicator LED will switch o. Do not leave the camera on charge for a long period

of time after the red LED has switched o.

Operation

Press and hold the button, on the rear of the camera, to turn the camera on. The reason for the

camera possibly not switching on, is that the battery is depleted.

Enhanced brightness

When switched on, press the button once to give enhanced brightness, and again to turn the LED

lights o. The camera will continue to function in this mode and the battery charge will be extended.

Press and hold the button to switch the camera o.

Camera Speciﬁcation:

Frequency 2414Mhz (CH1)

RF Output Power 50mW (300 feet in line of sight)

Total Pixels PAL 720 x 576 NTSC: 720 x 480

Minimum Illumination 0.01Lux / F1.2

Lens Focus 1-100cm (adjustable)

View Angel 90

Light Source LED 2200mcd x 6 (Range of LED lamp: 5 metres)

IR/940nm 70mW x 6 (Range of IR940 lamp: 5 metres)

IR/850nm 70mW x 6 (Range of IR850 lamp: 8 metres)

Li-Battery Capacity 380MAH

Working Time 1.5 hours

Charge Time 1.5 hours

Voltage DC 5V

Current Lamp o: 160mA Lamp on: 260mA Lamp highlight: 300mA

Weight 35g

Size (DXL) 20mm x 84mm

Monitor Speciﬁcation

Wireless Receiving Wireless freq.

1of 6 groups 2.4GHz–8 channels: CH1: 2414MHz; CH2: 2432MHz; CH3: 2450MHz;

CH4: 2468MHz.CH5: 2490MHz; CH6: 2510MHz;

CH7: 2390MHz; CH8: 2370MHz

Within 5.8G-A 8 channels: CH1: 5865MHz; CH2: 5845MHz; CH3: 5825MHz;

CH4: 5805MHz. CH5: 5785MHz; CH6: 5765MHz;

CH7: 5745MHz; CH8: 5725MHz

Beyond 5.8G-B 8 channels: CH1: 5705MHz; CH2: 5685MHz; CH3: 5665MHz;

CH4: 5645MHz. CH5: 5885MHz; CH6: 5905MHz;

CH7: 5925MHz; CH8: 5945MHz

Within 5.8G-C 8 channels: CH1: 5733MHz; CH2: 5752MHz; CH3: 5771MHz;

CH4: 5790MHz. CH5: 5809MHz; CH6: 5828MHz;

CH7: 5847MHz; CH8: 5866MHz

Within 5.8G-D 7channels for FPV: CH1: 5740MHz; CH2: 5760MHz; CH3: 5780MHz;

CH4: 5800MHz. CH5: 5820MHz; CH6: 5840MHz;

CH7: 5860MHz; CH8: SPI

Beyond 5.8G-E 7 channels for FPV: CH1: 5705MHz; CH2: 5685MHz; CH3: 5665MHz;

CH4: 5645MHz. CH5: 5885MHz; CH6: 5905MHz;

CH7: 5925MHz; CH8: SPI

Sensitivity: 92dB

AV IN TV system: NTSC / PAL

Output voltage: 3.6-4.2V

AV OUT TV system: NTSC / PAL

HD 5-inch LCD screen: Active area 108mm(W) X 64.8mm(H)

Resolution: 800 X 480 Pixel

Luminance for LCM: 200 cd/

Video Resolution: 720*576 / 720*480

Video compress: MPEG-AVI 30fps

Play format: MPEG-AVI

Audio Subcarrier frequency: 2.4GHz:6.0MHz; 5.8G-A/B/C:6.5MHz;

5.8G-D/E:6.0& 6.5MHz

Earphone Frequency Range: 20HZ-20KHz stereo

Items Value

STREAMVAC

™

8 9

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

Items Value

Earphone Output Left: 20MW+ right 20mW [16O](suit to largest

volume) Speaker 1W

Photo Format: JPG/JPEG

Storage: External SD card TF card 1GB-32GB optional

32 GB Recording time: 10-32 hours

1GB Photos: 15625pcs

Operating system PC: Windows & Mac OS

Power Port: USB 2.0

Language: Multiple

Voltage: DC 5V

Current (receiving mode) 660MA

Current (recording mode) 680MA

Current recording with o-screen mode 340MA

AC adapter: DC 5V 2A

Built-in battery: Li-battery 3200Mah

Standby time: (Wireless record) ≥9.5 hours(o-screen); ≥5hours on-screen

(Wired record) ≥12 hours(o-screen); ≥6hours on-screen

*LED camera not included

Size (L x W x H) 131mm x 86mm x 18mm

Weight(g) 205g

Basic Monitor Operation

1. Power On/O:

Press and hold to switch the power on – press and hold to switch the power o.

2. Working mode switch

(switch located on the side of the camera – see rear for icons)

When switched to Monitor will take photos and record videos

When switched to Monitor will display recorded photos and videos When

switched to Monitor is in the state of motion detection.

3. Raise the monitor antennae to improve wireless connection with the bullet camera.

4. SD card

If you wish to use the video function, insert an SD card prior to switching the monitor on. If

no SD card is inserted, the monitor can be used for viewing only. The screen

will show a symbol of a SD card when inserted.

5. Viewing the SD card on computer

Switch the power o prior to removing the SD card from the monitor. Re move and

insert the SD card directly into a computer to view your videos or images.

Taking a photo and video

Switch the Monitor on, and select working mode . Switch the bullet came on and wait for them

to connect.

1. Taking a Photo

When is displayed, press once, symbol will display on the screen, and a

still image will be captured

2. Video Recording

When is displayed, press and hold for 3 seconds and the monitor will begin

recording, (screen will display “REC”). Press once to pause the video,(screen will

display ), press again to continue recording. Press to end the recording, It will save

automatically and exit.

3. Mute

When is displayed, press to mute the sound. Screen displays “MUTE”.

Press again to recover sound.

M M

STREAMVAC

™

10 11

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

Viewing Photos and Videos

Select central position of the switch on the side of the monitor to view photos and videos.

Press / to select either “Photo” or “Video”.

Viewing Videos:

1. When “Video” is selected, press to display the list of videos

which have been recorded

2. Press / to scroll through the list and press to play the selected video.

3. Whilst the video is being viewed, press and hold“ ” to fast forward; press and

hold to rewind. (Press / to adjust volume)

4. Press to pause; press again to release pause.

5. Press and to exit the video and return to the video list.

6. Press again to return to photo and video option.

Viewing Photos

1. When “photo” is selected, press to view the list of photos which have

been recorded.

2. Press / to scroll through the list and press to display the selected photo.

3. Press to return to the photo list.

Deleting Photos & Videos

1. Press / to select the desired video/photo.

2. Press to open the options dialogue.

3. Press / to select the desired option

4. Press to conﬁrm.

Additional Information &

Motion Detection

1. Switch the monitor on, and select the , mode on the side switch.

2. Press and hold for 3 seconds to enter the motion detect recording.

When moving objects are detected, the monitor will automatically

begin to record, and the screen will show “REC”. After 10 second, if no

movement is detected, the monitor will automatically pause recording, until further

movement is detected, when it will continue to record the video. To end motion

detect recording, press , it will automatically save the video.

Function Settings

Switch the monitor on, with the mode or displaying, press to enter the function mode.

Press / to select “Function”, then press to enter into function menu.

1. Channel Setting: Press / to select “Channel Setting”, and then press to enter

STREAMVAC

™

12 13

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

1) Auto Switch Press / to select “Auto Switch”, and press to enter.

Press / to select channel and press to turn it o/on.

Press to exit.

2) Auto Switch Press / to select “Auto Switch”, and press to enter.

Press / to select “O” / “On”, then press to conﬁrm and exit.

3) Dwell Time Press / to select “Dwell Time” and press to enter

Press / to adjust dwell time. Then press to conﬁrm and exit.

Recorder Resolution:

Press / to select “Recorder Resolution” and press to enter. Press / to select

“720X576” / “720X480”. Press to conﬁrm and exit.

3. Frame Rate

Press / to select “Frame Rate” and press to enter.

Press / to select “30 FPS”/“25 FPS”, and press to conﬁrm & exit.

4. Video Segment Sizes

Press / to select “Video Segment Sizes”, then press to

enter. Press / to select “10 MIN”/“30MIN”/“60 MIN”. Press to conﬁrm & exit.

5. Overwrite

Press / to select “Overwrite”, and press to enter. Press / to

select “O”/ “On”, and press to conﬁrm & exit. If “Overwrite” is on, DVR will cycle

record, and save the latest video.

STREAMVAC

™

14 15

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

6. Time Stamp

Press / to select “Time Stamp”, and press to enter.

Press / to select “O”/ “On”, and press to conﬁrm & exit. If it’s on, video will be saved with

synchronous time.

7. Information Display

Press / to select “Information Display”, and press to enter. Press / to select “O”/

“On”, and press to conﬁrm & exit. If it’s on, screen will display information of working frequency,

channel, audio state, date & time, etc. If select “O”, all the information will not be displayed.

8. Video Setting

Press / to select “Video Setting”, and press to enter.

Press / to select “Brightness” or “Contrast”; then press to enter; then press / to adjust

brightness or contrast. Press to exit

Power DVR on, working mode switched to / press to enter into func-tion & system setting.

Press / to select “System”; then press to enter into system menu.

1. Date & Time

Press / to select “Date Time”, and press to enter. Press again to move the

cursor, and press / to adjust date & time. Press to exit.

2. Language

Press / to select “Language”, and press to enter. Press to choose

your language. And press to conﬁrm and exit.

STREAMVAC

™

16 17

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

3. AV Out

Press / to choose “AV Out”, and press to enter. Press / to choose “PAL/NTSC”

Press to conﬁrm video displayed on TV screen. Pull out AV cable, video will back to DVR screen.

4. Format

Press / to select “Format”, and press to enter. Press / to choose “Yes”. Press to

conﬁrm & exit.

5. Power Save

Press / to select “Power Save”, and press to enter:

1. Auto LCD O

Press / to select “Auto LCD O”, and press to enter. Press /

to select “1 MIN”/ “5 MIN”/ “O”, and press to conﬁrm & exit. If turn on “Auto LCD O”, LCD

screen will automatically shut o when the set time is due. Press any key to recover screen display.

2. Auto Power O

Press / to select “Auto Power O”,and press to enter.

Press / to select “5 MIN” / “10 MIN” / “O”, and press to conﬁrm & exit. If turn on “Auto

Power O”, DVR will automatically shut o when the set time is due.

6. Firmware Update:

Press / to select “Firmware Update”, and press to enter. Press / to select

“Yes” and press to start update. Please remember to save update ﬁle “zburnT_C11.run.elf”

at root directory of SD card.

STREAMVAC

™

18 19

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

7. Default Setup

Press / to select “Default Setup” and press to enter.

Press / to select “Yes” and press to conﬁrm. Press to exit.

8. Memory Info

Press / to select “Memory Info”, and press to view capacity of SD card.

Press to exit.

9. Version

Press / to select “Version” and press to view version information.

Press to exit.

10. Display Mode

Press / to choose “Display Mode”. Press / to choose “16:9/4:3”. Then press to

conﬁrm. Press to exit.