Streamline WVD-961-230-051-EU User manual

Brand: Streamline

Model: WVD-961-230-051-EU

Type: User manual

Streamline WVD-961-230-051-EU gutter cleaning system boasts a powerful motor with two speed settings, allowing for efficient removal of debris from gutters, while keeping your feet firmly on the ground.

INSTRUCTION

MANUAL

STREAMVAC

™

WVD-961-230-051-EU

1 x 70ltr Gutter

Cleaning Vacuum

1 x VACLINE™ Crushproof

Vacuum Hose with

rubber cuffs

Codes:

Kit Includes:

INSTR-STREAMVAC-70

2 3

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

STREAMVAC

™

• STREAMLINE® systems can be built according to customers’ exact requirements

• For non-standard systems, the user’s needs or speciﬁcations are listened to and turned

into reality.

• Whilst price is important, quality is remembered long after price is forgotten

• We insist on sourcing brand name products from around the world, only of a reputable

quality, and bring them together under the STREAMLINE® name

• All STREAMLINE® products carry a full one year’s warranty, according to the manufacturers’

standard terms and conditions of sale.

• We have an in-house technical helpline able to answer most of your questions relating to the

capabilities and functionalities of all STREAMLINE® products

• If we get it wrong, we will put it right. If you are sent a wrong item, we will immediately

attend to sending you the correct item and arrange a collection of the wrong item without

any quibbles

• STREAMLINE® is backed by a comprehensive range with massive stocks providing you with a

‘one stop shop’ for all your requirements.

Flexibility

Quality

Service

Why STEAMLINE®?

MANUFACTURED

IN THE

UNITED KINGDOM

CHECKED AND

TESTED BY

QUALITY CONTROL

STREAMLINE® Warranty

The warranty on all Machines and Equipment is

for 1 year (12-months) from RECORDED DATE

OF PURCHASE.

THIS WARRANTY EXCLUDES NORMAL

MAINTENANCE ITEMS, including but not limited

to HOSES, FILTERS, O-RINGS,

DIAPHRAGMS, VALVES, GASKETS,

CARBON BRUSHES and damage to motors

and other components as a result of failure to

replace normal maintenance items. THIS LIST

IS NOT EXHAUSTIVE.

If STREAMLINE® receives notice of such defects

during the warranty period, STREAMLINE®

will either, at its opinion, repair or replace

components which prove to be defective.

Replacement parts will only be supplied under

warranty, upon the inspection and approval of

the defective parts by STREAMLINE®.

Should it be necessary to supply replacement

parts before the opportunity to inspect, these

will be charged at current prices and credit will

only be issued upon subsequent inspection and

warranty approval by STREAMLINE®.

The customer is responsible for the cost of

return of the defective part. If warranty is

approved, STREAMLINE® will pay for the cost

of the repaired or replacement part.

This warranty excludes the following conditions

and circumstances which are at the discretion

of STREAMLINE®:

Wear and tear, misuse, abuse improper

maintenance, frost damage, the use of chemicals

other than those supplied or approved by

STREAMLINE®, improper installation or repair,

unauthorised modiﬁcation, incidental or

consequential costs, loss or damage, service,

labour or third party charges, the cost of

returning defective parts to STREAMLINE®.

This warranty constitutes the exclusive remedy

of any purchaser of a STREAMLINE® unit and

is in lieu of all other warranties, express or

implied, including without limitation any implied

warranty of merchantability or ﬁtness for use, to

the fullest extent permitted by law. In no event

shall any implied warranty of merchantability or

ﬁtness for use exceed the term of the applicable

warranty stated above and STREAMLINE® shall

have no other obligation or liability.

Important

Unfortunately these rights cannot be

transferred to a third party.

4 5

W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830 W: www.streamline.systems E: sales@streamline.systems T: +44 (0)1626 830 830

STREAMVAC

™

The user of this accessory is responsible for

reading, understanding and following all

warnings and precautions prior to operation.

Failure to follow all warnings and precautions

may result in property damage, serious personal

injury, or death.

• NEVER use in the vicinity of power lines,

junction boxes or power sockets.

• NEVER use the STREAMVAC™ to clean

people or animals.

• The

STREAMVAC™

must only be used by a

trained person authorised to do so.

• This instruction leaﬂet must be made

available for consultation by the user.

• DO NOT attempt to modify the

STREAMVAC™ as this could cause a

safety hazard.

• NEVER use faulty components.

• If there is visible damage to the

STREAMVAC™ ﬁttings - replace them

immediately with original spare parts.

• Only use spare parts from the manufacturer

(STREAMLINE®).

• Appropriate clothing and safety shoes should

be worn when operating the tool.

• ALWAYS read, understand and follow

operation instructions.

• ALWAYS make certain area is clear of

obstructions or hazards.

If you are using carbon ﬁbre or

aluminium vacuum sections, keep well

away from any electrical sources or

overhead power lines or cables.

Safety Precautions

If you have any questions regarding the safe

operation of your STREAMVAC™ gutter

cleaning system, please contact our

Technical Support Team on

+44 (0)1626 830830

STREAMLINE® disclaims all liability for damage or

injury as a result of improper or unreasonable use

or failure to follow operating instructions of the

STREAMVAC™.

Applications

The STREAMVAC™ is designed to remove debris

from commercial and residential gutters, whilst

keeping both feet on the ground! The sectional pole

is connected together to access heights of up to 48

feet. Various nozzle attachments can be used for

dierent applications.

Instructions for use

Set Up Emptying The Drum

Cleaning Up & Maintenance

Operating Instructions

• Make sure that the

STREAMVAC™

operating on a level and ﬁrm surface. Lock

the front castor wheels when in use.

• Make sure that the ﬁlter element is in place.

• Make sure that electrical supply lead is

protected against damage and is out of

the way of trac. Make sure that you are

displaying sucient ‘Trip Hazard’ warning

signs. Electrical connections should be kept

dry at all times.

• Connect the suction hose to the inlet on the

front of the STREAMVAC™.

• Attach the aluminium swan neck to the

female taper end of a Carbon Fibre pole

section. Join the Carbon Fibre pole sections

together with the narrow taper end pointing

to the ground.

• Join the desired number of sections together,

using the wall of the building, to support

the pole until the gutter can be accessed.

(A support pole may be required if the pole

exceeds 30 foot.)

• Use the gutter of the building to support the

swan neck, if necessary, whilst connecting the

suction hose to the base section.

• When the drum becomes full, empty

the contents as follows; Ensure that the

front castors are in the locked position. To

use the tipping mechanism, remove the

STREAMVAC™ head assembly by releasing to

two clips on either side of the drum. Remove

the suction hose. Lift the drum up, by using

the hand grip at the base of the drum, and tip

the contents out.

• Reverse the procedures above to

resume cleaning.

• Use the ‘Push & Clean’ feature to clean the

ﬁlter element. Switch the STREAMVAC™ on

to speed 2. Hold your hand over the end of

the ﬂexi hose and depress the ‘Push & Clean’

button three times.

• When the cleaning operation is complete,

disassemble the Carbon Fibre pole sections,

and rinse them thoroughly with clean

water. Clean and dry the male and female

connecting taper of each pole section.

Lubricate the male taper with Vaseline or

bees wax.

• Suck clean water through the ﬂexi hose to

ﬂush the system out.

• Remove the STREAMVAC™ head assembly

and carefully rinse the outside of the ﬁlter

cartridge with clean water. Allow it to dry and

reassemble the STREAMVAC™.

• Switch the STREAMVAC™ on, by selecting

either speed 1 or speed 2.

• Slowly ‘rake’ the debris in the base of the

gutter, sucking it up when it becomes loose.

• Should the sections or hose become blocked,

lower the pole and suck up some water from

a container, which will loosen the obstruction

and clear the hose.

Hamilton House, 8 Fairfax Road,

Heathﬁeld Industrial Estate,

Newton Abbot

Devon, TQ12 6UD

United Kingdom

Telephone: +44 (0) 1626 830 830

Email: sales@streamline.systems

Visit www.streamline.systems

Streamline WVD-961-230-051-EU User manual

Streamline WVD-961-230-051-EU User manual

Streamline WVD-961-230-051-EU User manual

Related papers

Other documents