2. Hocell
  3. M211 5G NR USB Dongle
M211 5G NR USB Dongle

Hocell M211 5G NR USB Dongle User guide

  • Hello! I've reviewed the Quick Start Guide for the Hocell 5G Dongle M211. This document provides instructions on how to connect the device to a network via USB and a SIM card, and use the web portal. I'm ready to answer any questions you have about its features and setup process or any other details from the manual.
  • What kind of SIM card does the dongle support?
    What are the power requirements for the USB port?
    How can I reset the dongle?
    What is the default IP address for the web portal?
    What are the default login credentials for the web portal?
5G Dongle
Quick Start Guide
Model：Hocell M211
Thank you for choosing Hocell 5G Dongle M211.
Introduction
This manual briefly introduces the appearance and
usage of the 5G Dongle M211. Please read the
relevant instructions carefully so as to use the product
correctly.
Connection instance
This product can be connected to an equipment
(computer, server, drone, AR glass, robot, etc.)
through an USB Type-C to Type-C, or a Type-C to
Type-A cable, and connected to 5G/LTE network
through a SIM card. The USB Type-C or Type-A port
of the equipment should be USB3.1(Gen2) version or
above to deliver power of at least 10W.
Product interfaces and indicators
The appearance of 5G Dongle M211 is shown in the
figure below：
1. LINK/SYS indicator
Red & green dual-color indicator. Flashing red
indicates normal power supply of USB; green light
indicates that the network connection is normal.
2. Micro SIM card slot
Only Micro SIM card is supported. The card should
be inserted in the direction indicated.
3. Type-C port
Connect the dongle to an equipment through the USB
Type-C port. The USB port of the equipment should
be USB3.1 (Gen2) or above, and the power
requirement is at least 10W (e.g., 5V/2A) to ensure
sufficient power supply.
4. Reset button
Push the reset button with a SIM card tray pin when
needing to reset the dongle.
Network connection and instructions
1. Plug in the Micro SIM card, and connect the
equipment with the 5G Dongle through USB Type-C
to Type-C/Type-A data cable. When the indicators are
normally on, it indicates that the connection is
normal.
2. View the network status of the equipment (e.g., a
computer), select Start > Control Panel > Network
Internet > network connection, check the internet
access status. If it’s normal, you can use the network
service normally.
3. If you need to check more network parameters
from the Web portal, input the IP address
192.168.10.1 from a browser, and login with
admin/admin (username/password).
Waring and notice
1. When the product is being charged, please do not
plug in the Micro SIM card to avoid damaging the
product.
2. The operating temperature is 0 ℃ - + 40 ℃. Do not
exceed the temperature range.
/