PACKAGE CONTENTS
• Four-port USB 3.0 Hub
• Built-in USB cable
• Quick Setup Guide
FEATURES
• Four USB 3.0 extended ports
• Built-in USB 3.0 hi-speed transmission cable
• LED power indicator light
• Compatible with USB 1.1 and USB 2.0 devices
• USB 3.0 data transfer rate up to 5.0 Gbps (maximum)
• Plug & Play (all ports support hot plug)
• Low power consumption and minimum heat
SYSTEM REQUIREMENTS
• Computer with a USB 1.1, 2.0, or 3.0 port
Note: USB 3.0 is backward compatible with USB 2.0 and
1.1, however data transfer speed will be limited to the
lowest port level.
• Windows 10, macOS, and Chrome OS
Before using your new product, please read these instructions to prevent any damage.
INSTALLING YOUR HUB
1 Connect the USB cable to a USB port on your
computer. The driver is installed automatically and
the blue LED turns on.
2Connect your USB devices to your hub.
Note: Do not disconnect any devices during data
transfer. Doing so may corrupt your data or damage
your devices.
LED
Cable
Output USB
ports
Top view
QUICK SETUP GUIDE
USB 3.0 4 Port
Portable Hub
NS-PH3A4AT / NS-PH3A4AT-C
NS-PH3A4AT _-C_21-0154_QSG_V1_EN_R2.ai 1 5/18/2021 1:41:46 PM
V1 ENGLISH 21-0154
SPECIFICATIONS
• Transmission port: USB 3.0
•Transmission rate: 5.0 Gbps (maximum)
• Work temperature: 32°F~122°F (0°C~50°C)
• Work humidity: 20% RH ~ 85% RH
• Dimensions (H × W × D): 3.74 × 1.57 × .65 in.
9.5 × 4 × 1.65 cm
LEGAL NOTICES
FCC Caution
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
ICES Statement
CAN ICES-003(B) / NMB-003(B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
NS-PH3A4AT _-C_21-0154_QSG_V1_EN_R2.ai 2 5/18/2021 1:42:21 PM
/