Miracall Technology MC-50 Operating instructions

Brand: Miracall Technology

Model: MC-50

Type: Operating instructions

Key Phone MC-50

Operation Manual

Content

I .Introduction ------------------------------------------------------------ 1

II. Technical Parameter -------------------------------------------------------------2

III. Function Key Introduction --------------------------------------------------------3

IV. Operation Instruction------------------------------------------------------------4

I. Introduction

MC-30 is a new kind of digital key phone developed by Miracall Technology Co.Ltd., specially

for MC-A100 and MC-832KA, KB, which has inherit traditional group phone merit and much bold

innovation. It can be connected with Ear Phone, Incoming Call Light, LED, and it’s inner structure

and outline is designed elaborately and so on. All of the above is embodied advantage of our group

phone. LED is adopted by STN technology. English and Chinese character can displayed on it

obviously and accurately. Making use of Chinese hint, Users can operate our group phone system to

change display view according their need. There are the following feature for MC-30: direct view,

high definition, huge characteristic library and English and Chinese Capability, simple operation and

beautiful outline and so on.

We’ll update MC-30 function according market status and won’t make any notice in advance.

Our company reserve revising copyright.

II. Technical Parameter

MC-30

1. Weight: 0.9 kg

2. Dimension: 219 mm x 178 mm x 110 mm( L x W x H )

3. The Max. Connection Line length: <100M

4. Dimension at wall installation: the distance between the two terminal is 83.5mm.

The configuration of Ear Phone: with Micro-phone, resistance :100Ω,

III Function Key

CHK/CLR

To enter into system program mode/ delete the data or return to normal mode.

TH/TL KEY

For navigating caller ID numbers and checking 50 groups number in unit .

PAGE Key

For paging external loud speaker and key phones.

CONF Key

For making a conference call.

↑↓Key

For adjusting the volume of speaker, handset, earphone and ring.

SPK. Key

For hand free talking.

MUTE Key

For muting (including handset talking, earphone talking and hand free talking ) during conversation

when the lamp lights.

And for switching to answer automatically in hook-on status when the lamp lights.

TRFR Key

For transferring incoming call to another Extension .System can switch to night service mode

when the key is pressed in hook-on status. The function can be realized by the key phone connected on port No.

001.

ICM Key

For making an internal call.

LINE Key

To select a CO Line.

REDIAL Key

For redialing a number. 3

FLASH Key

For ending a talking without hanging up.

FW/DND Key

For forward calls if the lamp is on or do not disturb if the lamp flashes.

HOLD Key

For confirming program revised and holding a CO line during a conversation, or save the program.

Incoming Call Light

Adopting big lamp to indicate visibly an incoming call so that you can know which phone is ringing,

whenever you are under noise environment or far from the phone.

LCD

Adopting STN display module with two rows and 30 characters. LCD Adopting STN display

module with two rows and 30 characters. Date, time, extension number, call status, conversation

time, information of incoming calls, program status can be displayed.

Direct Selection Key

For calling extension and outside line directly and monitoring extension status. No.1-16 are two

color LEDs red /green, No. 25-32 are single color LEDs（red）.And No.1-32 can be set for CO line

ports, extension ports, outside call numbers.

You can make a outside call, intercom, transfer or pick up a call at another extension, and so on by

one-touch dialing.

CHECK、CLEAR Key

For system programming and key programming.

IV. Operation Instruction

All below operation is based on CO Line Dialing tone when off-hook:

Function Operate Code

Intercom Call ICM +ext. number

Dial Outside Off-hook + CO line number

Call Transfer DRFR + ext. + on-hook

Call on hold HOLD

By local ext: ICM + “44”

By Desired ext: ICM + “4” + ext.

Retrieve a call

on holding

By Assigned ext: ICM + “3” + CO line port number

Pickup a Call ICM + “50”

Pickup directly ICM + “5” + ringing ext.

Auto-call back on busy (CO) Press “6” when CO line busy

Auto-call back on busy (EXT) Press “6” when ext. busy

Walking COS ICM + “** password ” + “9” + “CO Line number”

Day/night service Press TRFR when free (at 001 port only)

Call Interrupt ICM + “3” + CO Line port number + “1”

Call Break ICM + ext. number + “*”

Forward immediately: ICM + “71” + ext + “1” #

Forward on busy: ICM + “71” + ext + “2” #

Forward on no-answer: ICM + “71” + ext + “3” #

Call Forwarding

Forward on busy and no-answer : ICM + “71” + ext + “4” #

Do Not Disturb Press FWDND when free

Cancel DND or Forwarding ICM + “70” #

Set : ICM + “730#”

Auto-IP Route

Cancel: ICM + “731#”

Set: ICM + “722” + “4-digit password” #

EXT Blocking Password

Cancel: ICM + “723” + “4-digit password” #

Set: ICM + “762” + ext.+ #

Hotline dialing

Cancel: ICM + “760”#

How to program keys?

1.CO Line port setting: press CHK twice, EXT PROG MODE, press desired key, then press “1”,

LINEX, then input 2-digits CO line series number, press HOLD and CLR ,exit.

2. EXT port setting: press CHK twice, EXT PROG MODE, press desired key, then press “2”, PORT

XXX EXT XXXX, then then input 3-digits EXT port number, press HOLD and CLR ,exit.

3. CO line number setting: press CHK twice, EXT PROG MODE, press desired key, then press

“3”,LINE NUMBER, press “9”+ CO Line number, press HOLD and CLR ,exit.(unavailable for

MC-832KB)

Miracall Technology MC-50 Operating instructions

Brand: Miracall Technology

Model: MC-50

Type: Operating instructions

Download PDF

report

Miracall Technology MC-50 Operating instructions

Miracall Technology MC-50 Operating instructions

Related papers

Other documents