Weston 83-2015-W User guide

Brand: Weston

Model: 83-2015-W

Type: User guide

APPLE PEELER

83-2015-W

DUE TO CONSTANT FACTORY IMPROVEMENTS, THE PRODUCT PICTURED MIGHT DIFFER

SLIGHTLY FROM THE PRODUCT IN THIS BOX. 060315

GENERAL SAFETY RULES

COMPONENT LIST

ASSEMBLY INSTRUCTIONS

CLEANING INSTRUCTIONS

PEELING, SLICING & CORING

SLICING & CORING

PEELING

ADJUSTING THE BLADES

RECIPES

WARRANTY

REGLAS IMPORTANTES DE SEGURIDAD

LISTA DE COMPONENTES

ENSAMBLADO

INSTRUCCIONES DE LIMPIEZA

PELAR, SACAR EL CENTRO Y REBANAR

REBANAR Y SACAR EL CENTRO

PELADO

AJUSTE DE LAS CUCHILLAS

RECTAS

INFORMACIÓN DE GARANTÍA WESTON

IMPORTANTES RÉGLES DE SÉCURITÉ

LISTE DES COMPOSANTS

ASSEMBLAGE

NETTOYAGE

ÉPLUCHER, COUPER ET ÉTROGNER

ÉPLUCHER ÉPLUCHER

ÉPLUCHER

RÉGLAGE DES COUTEAUX

RECETTES

INFORMATION SUR LA GARANTIE

TABLE OF CONTENTS / ÍNDICE / TABLE DES MATIÈRES

1. Keep ngers clear of the Blades at all times. Never push the product with

your hands in line of the Blades.

2. Protective cut-resistant gloves are recommended whenever handling the

Blade assemblies.

3. KEEP CHILDREN AWAY. NEVER LEAVE THE APPLE PEELER

UNATTENDED. This is not a toy.

4. CHECK FOR DAMAGED PARTS. Before using the apple peeler, check

that all parts are operating properly, and perform the intended functions.

Check for alignment of moving parts, binding of moving parts, mounting and

any other conditions that may affect the operation.

5. The Manufacturer declines any responsibility in the case of improper use of

this machine.

6. Be sure the Apple Peeler is stable during use. The Suction Cup Base

should be secure and the machine should not move during the cutting

process.

7. Do not use the Apple Peeler while under the inuence of drugs or alcohol.

SAVE THESE INSTRUCTIONS

GENERAL SAFETY RULES

READ AND FULLY UNDERSTAND ALL INSTRUCTIONS AND WARNINGS

PRIOR TO USING THIS UNIT. YOUR SAFETY IS MOST IMPORTANT!

FAILURE TO COMPLY WITH PROCEDURES AND SAFE GUARDS MAY

RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE. REMEMBER:

YOUR PERSONAL SAFETY IS YOUR RESPONSIBILITY!

ENGLISH INSTRUCTIONS

COMPONENT LIST

DIAGRAM NUMBER PART DESCRIPTION PART NUMBER

1 SUCTION CUP LEVER N/A

2 SUCTION CUP BASE N/A

3 SHAFT N/A

4 HANDLE

83-2119

4A 2” (5 CM) SCREW

5 HANDLE SHAFT

6 SHAFT REGULATOR THUMB LEVER N/A

7 FOOD PRONGS 83-2117

8 PROTECTIVE CAP N/A

9 PEELER BLADE ARM N/A

10 PEELING BLADE

83-2118

11 PEELING BLADE ADJUSTMENT

WING NUT

12 PEELING BLADE ADJUSTMENT SCREW

13 CORING/SLICING BLADE

14 CORING/SLICING BLADE WING NUT

WARNING SHARP!

WARNING

SHARP BLADES

KEEP FINGERS CLEAR OF BLADE AREA!

Protective/cut-resistant gloves recommended whenever

handling the Blades!

If any components of this unit are broken, the unit does not operate properly or you

need a replacement instruction manual, visit us on the web at

WestonProducts.com

Or call Weston Brands LLC Toll Free at 1-800-814-4895

Monday thru Friday 8:00am-5:00pm ET. Outside the U.S. call 001-440-638-3131

ENGLISH INSTRUCTIONS

ASSEMBLY

1. Attach the Handle with included 2” (5 cm) Screw to the Handle Shaft using a

Phillips head screwdriver until tight.

2. Screw the Handle Assembly onto the end of the Shaft until tight.

3. When attached, the handle will spin freely.

4. Remove the Protective Cap from the Food Prongs. Do not discard the

Protective Cap, as it will be used to safely store the Apple Peeler.

5. Attach the Apple Peeler to any at, smooth surface. Flip the Suction Cup Lever

so that it points to the Peeling Blade end of the unit. Hold the Suction Cup

Base rm and at against the countertop with one hand and move the Suction

Cup Lever over towards the Handle end of the unit.

6. Check to make sure the Apple Peeler is rmly xed to the surface.

Handle

2” Screw

Handle Shaft

Shaft

Suction

Cup Lever

Suction

Cup Base

CLEANING

1. Hand wash all parts that come in contact with food in warm, soapy water.

Rinse thoroughly. Dry immediately.

NOTE: The Apple Peeler is NOT dishwasher safe.

2. It is suggested to coat all the unpainted metal parts of the Apple Peeler with a

food-grade silicone spray.

3. Turn the Handle to bring the Shaft all the way in and through the Coring/Slicing

Blade. Place the Protective Cap onto the Food Prongs.

4. Place the Apple Peeler in its box. Store in a cool, dry location.

ENGLISH INSTRUCTIONS

PEELING, SLICING & CORING

1. Pull the Peeler Blade Arm

back until the metal lever

catches and holds the Peeler

Blade Arm pulled back.

2. Press Shaft Regulator

Thumb Lever to release the

stopper from the Shaft. Pull

on the Handle until the Shaft

is completely pulled back

(FIGURE 1).

3. Carefully push an apple,

potato or pear, bottom rst, all

the way onto the Food Prongs.

4. Lift up on the metal lever

of the Peeler Blade Arm to

release the Peeler Blade.

5. Turn the Handle clockwise

to start peeling the apple

(FIGURE 2).

6. The apple will meet with the

Coring/Slicing Blade. This will

begin the slicing and coring of

the apple.

7. When the apple has been completely peeled, sliced and cored, gently pull the

apple off of the core.

8. The apple core and seeds will remain on the Food Prongs. Firmly grasp the apple

core and pull it off of the Food Prongs.

FIGURE 1

Peeler

Blade Arm

Shaft

Regulator

Thumb

Lever

Shaft

Handle

Food

Prongs

Metal Lever

of the

Peeler

Blade Arm

(Not Shown)

FIGURE 2

Coring/

Slicing

Blade

Coring/Slicing

Blade Wing Nut

SLICING & CORING

1. Pull the Peeler Blade Arm back until the metal lever catches and holds the

Peeler Blade Arm pulled back.

2. Press Shaft Regulator Thumb Lever to release the stopper from the Shaft. Pull

on the Handle until the Shaft is completely pulled back (FIGURE 1).

3. Carefully push an apple, potato or pear, stem end rst, all the way onto the Food

Prongs.

4. Turn the Handle clockwise to start slicing/coring the apple.

5. The apple will meet with the Coring/Slicing Blade. This will begin the slicing and

coring of the apple.

6. When the apple has been completely sliced and cored, gently pull the apple off

of the core.

7. The apple core and seeds will remain on the Food Prongs. Firmly grasp the

apple core and pull it off of the Food Prongs.

ENGLISH INSTRUCTIONS

PEELING, SLICING & CORING

SLICING & CORING

PEELING

1. Pull the Peeler Blade Arm back until the metal lever catches and holds the

Peeler Blade Arm pulled back.

2. Press Shaft Regulator Thumb Lever to release the stopper from the Shaft. Pull

on the Handle until the Shaft is completely pulled back (FIGURE 3).

3. Loosen the Coring/Slicing Blade Wing Nut. Turn the Coring/Slicing Blade away

from the Peeler Blade about 90 degrees. Re-tighten the Coring/Slicing Blade

Wing Nut until snug.

4. Carefully push an apple, potato or pear, stem end rst, all the way onto the

Food Prongs.

5. Lift up on the metal lever of the Peeler Blade Arm to release the Peeler Blade.

6. Turn the Handle clockwise to start peeling the apple (FIGURE 4).

7. When the apple has been completely peeled, rmly grasp the apple and pull it

off of the Food Prongs.

FIGURE 3

Peeler

Blade Arm

Shaft

Regulator

Thumb

Lever

Shaft

Handle

Food

Prongs

Metal Lever

of the

Peeler

Blade Arm

(Not Shown)

Coring/

Slicing

Blade

Coring/Slicing

Blade Wing Nut

FIGURE 4

ENGLISH INSTRUCTIONS

ADJUSTING THE BLADES

CORING/SLICING BLADE ADJUSTMENT

1. Pull the Peeler Blade Arm back until the metal lever catches and holds the

Peeler Blade Arm pulled back. Press Shaft Regulator Thumb Lever to release

the stopper from the Shaft. Pull on the Handle until the Shaft is slightly pulled

back.

2. Loosen the Coring/Slicing Blade Wing Nut slightly. Turn the Coring/Slicing

Blade until the Food Prongs are in the center of the ring on the Coring/Slicing

Blade. Re-tighten the Coring/Slicing Blade Wing Nut until tight.

PEELING BLADE ADJUSTMENT

1. To adjust the Peeling Blade to different fruit diameters (this may be necessary

if you are peeling smaller or thinner apples or potatoes) use a at head

screw driver and turn the Peeling Blade Adjustment Screw clockwise or

counter clockwise until desired distance is achieved.

2. To adjust peeling depth, loosen Peeling Blade Wing Nut. Adjust Peeling Blade

to desired depth, and re-tighten Peeling Blade Wing Nut.

Page is loading ...

Weston Brands LLC warrants to the ORIGINAL RETAIL PURCHASER of this product that if operated in accordance

with the printed instruction accompanying it, then for a period of 2 years from the date of purchase, the product shall be

free from defects in material and workmanship.

The Warranty Card, along with a copy of the original receipt, must be received by Weston Brands LLC within 30 days

from purchase date for the warranty to apply. Failure to send the completely lled out Warranty Card, along with a copy of

the original receipt, will void the warranty.

The product must be delivered to or shipped freight prepaid to Weston Brands LLC for warranty services, in either

its original packaging or similar packaging affording an equal degree of protection. Damage due to shipping is not the

responsibility of the company. Weston Brands LLC charges a $35.00 per hour bench charge. NOTE: No repairs will

be started without the authorization of the customer. The return shipping cost to the customer will be added to the repair

invoice.

Prior to returning the product for Warranty Repair, the product must be thoroughly cleaned and free from any food

particles or other debris. Failure of the purchaser to comply with this standard will result in the unit being returned without

repair. In some cases, a $50 cleaning surcharge may apply.

Weston Brands LLC will repair (or at its discretion, replace) the product free of charge, if in the judgment of the

company, it has been proven to be defective as to seller’s labor and material, within the warranty period.

New or rebuilt replacements for factory defective parts will be supplied for two (2) year from the date of purchase.

Replacement parts are warranted for the remainder of the original warranty period.

For non-warranty repairs, contact Weston Brands LLC’s Customer Service at 1-800-814-4895 M-F 8am-5pm ET

(outside of the United States 001-440-638-3131) to obtain a Return Merchandise Authorization Number (RMA Number).

Weston Brands LLC will refuse all returns that do not contain this number. DO NOT RETURN THE UNIT WITHOUT

PROPER AUTHORIZATION FROM WESTON BRANDS LLC.

LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is designed.

The product must not have been previously altered, repaired, or serviced by anyone else other than Weston Brands

LLC. If applicable, the serial number must not have been altered or removed. The product must not have been subjected

to accident in transit or while in the customer’s possession, misused, abused, or operated contrary to the instructions

contained in the instruction manual. This includes failure caused by neglect of reasonable and necessary maintenance,

improper line voltage and acts of nature. This warranty is not transferable and applies only to U.S. and Canadian sales.

Except to the extent prohibited by applicable law, no other warranties whether expressed or implied, including

warranty merchantability and tness for a particular purpose, shall apply to this product. Under no circumstances shall

Weston Brands LLC be liable for consequential damages sustained in connection with said product and Weston Brands

LLC neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than

such as is expressly set forth herein. Any applicable implied warranties are also limited to the two (2) year period of the

limited warranty.

This warranty covers only the product and its specic parts, not the food or other products processed in it. Weston is

not responsible for missing or damaged parts on discounted/clearance, resale or nal sale items where the seller may not

be able to guarantee full functionality or completeness of the unit.

CUT ALONG THE DOTTED LINE AND SEND THE WARRANTY CARD ALONG WITH A COPY OF YOUR

ORIGINAL PURCHASE RECEIPT TO:

Weston Brands LLC / WARRANTY

20365 Progress Drive, Strongsville, OH 44149 USA

Customer Name:

Address:

City/State/Zip/Country:

Telephone Number:

E-Mail Address:

Original Date of Purchase:

Product Model #:

Serial # (if applicable):

I have read the warranty information. Initial here:

WESTON WARRANTY INFORMATION

SAVE THIS WARRANTY INFORMATION FOR YOUR RECORDS!

WESTON WARRANTY CARD

SEND THIS CARD ALONG WITH A COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO:

WESTON BRANDS LLC / WARRANTY, 20365 PROGRESS DRIVE, STRONGSVILLE, OH 44149 USA

Copy of Receipt

Included

Page is loading ...

INSTRUCCIONES EN ESPAÑOL

REGLAS IMPORTANTES DE SEGURIDAD

LISTA DE COMPONENTES

NÚMERO DE DIAGRAMA DESCRIPCIÓN DE LA PIEZA NÚMERO DE PIEZA

1 PALANCA DE LA COPA DE SUCCIÓN N/A

2 BASE DE LA COPA DE SUCCIÓN N/A

3 EJE N/A

4 ASA

83-2119

4A TORNILLO DE 2” (5 CM)

5 EJE DEL MANGO

6 PALANCA DEL REGULADOR DEL EJE N/A

7 PINZAS PARA ALIMENTOS 83-2117

8 TAPA PROTECTORA N/A

9 BRAZO DE LA CUCHILLA DEL PELADOR N/A

10 CUCHILLA PELADORA

83-2118

11 TUERCA MARIPOSA DE AJUSTE

DE LA CUCHILLA PELADORA

12 TORNILLO DE AJUSTE DE LA

CUCHILLA PELADORA

13 CUCHILLA PARA SACAR EL

CENTRO/REBANAR

14 TUERCA MARIPOSA DE LA CUCHILLA

PARA SACAR EL CENTRO/REBANAR

¡ADVERTENCIA!

¡Se recomienda utilizar guantes de protectores y

resistentes a los cortes siempre que manipule

el conjunto de navajas!

¡PRECAUCIÓN,

AFILADO!

¡PRECAUCIÓN,

AFILADO!

Si cualquier componente de esta unidad está roto, si no funciona debidamente, o si necesita

un instructivo de repuesto, visítenos en la Web en

WestonProducts.com

O llame a Weston Brands LLC larga distancia sin costo 1-800-814-4895

De lunes a viernes, de 8:00 am a 5:00 pm tiempo del ET. Fuera de Estados Unidos llame

al 001-440-638-3131

Page is loading ...

INSTRUCTIONS EN FRANÇAIS

LISTE DES COMPOSANTS

NUMÉRO DE SCHÉMA DESCRIPTION DE LA PIÉCE NUMÉRO DE LA PIÉCE

1 LEVIER À VENTOUSE N/A

2 BASE À VENTOUSE N/A

3 MANCHE N/A

4 AXE

83-2119

4A VIS DE 5 CM (2 PO)

5 AXE DE MANIVELLE

6 LEVIER À ACTIONNER AVEC LE POUCE POUR LE

RÉGULATEUR DE L’AXE

N/A

7 FOURCHES 83-2117

8 CAPUCHON PROTECTEUR N/A

9 BRAS DU COUTEAU ÉPLUCHEUR N/A

10 COUTEAU ÉPLUCHEUR

83-2118

11 ÉCROU À AILETTE DE RÉGLAGE DU COUTEAU

ÉPLUCHEUR

12 VIS DE RÉGLAGE DU COUTEAU ÉPLUCHEUR

13 COUTEAU POUR ÉTROGNER/COUPER EN TRANCHES

14 ÉCROU À AILETTE DU COUTEAU POUR ÉTROGNER/

COUPER EN TRANCHES

AVERTISSEMENT TRANCHANTE!

AVERTISSEMENT!

Des gants en (bre aramide), résistants aux

coupures, sont recommandés lorsque l’on

manipule les rouleaux de lames !

N’hésitez pas à visiter notre site Web WestonProduct.com/support si un composant est

cassé, l’outil fonctionne mal, ou pour commander un nouveau mode d’emploi.

WestonProducts.com

Veuillez appeler Weston Brands, LLC au numéro sans frais : 1-800-814-4895

Du lundi au vendredi: de 8h00 à 17h00 ET. En dehors des États-Unis, veuillez

appeler le 001-440-638-3131

Page is loading ...

ATTENTION!

PLEASE INSPECT THIS PACKAGE THOROUGHLY FOR MISSING PARTS OR ANY PRODUCT DAMAGE.

IF YOUR PRODUCT CONTAINS SHIPPING DAMAGE, PLEASE CONTACT RETAILER FOR ASSISTANCE.

For all other questions regarding product usage, missing parts, product damage, difculty or warranty activation,

please contact the Weston Brands Customer Service Team:

8:00 am to 5:00 pm ET, Monday thru Friday

[email protected]

U.S. Residents Customer Service Line: 1-800-814-4895 (Outside U.S. Call: 001-440-638-3131)

Weston Brands LLC, Cleveland, Ohio 44149

WestonProducts.com

Please DO NOT return this item to the retailer before contacting

Weston Brands Customer Service.

SAVE THESE INSTRUCTIONS!

Refer to them often and use them to instruct others.

ATTENTION!

VEUILLEZ INSPECTER CET EMBALLAGE AVEC SOIN POUR Y DÉTECTER

TOUTE PIÈCE MANQUANTE OU ENDOMMAGÉE.

SI DES PIÈCES ONT ÉTÉ ENDOMMAGÉES PENDANT LE TRANSPORT, VEUILLEZ

COMMUNIQUER AVEC LE DÉTAILLANT POUR OBTENIR DE L’AIDE.

Pour toutes les autres questions concernant l’utilisation du produit, les pièces manquantes, les problèmes ou

l’activation de la garantie, veuillez communiquer avec l’équipe du service clientèle des produits Weston:

de 8:00 à 17:00 HNE, du lundi au vendredi.

[email protected]

Numéro de téléphone du service clientèle pour les résidents des É.-U. : 1-440-638-3131

Numéro de téléphone à l’extérieur des É.-U. : 001-440-638-3131 Weston Brands LLC,

Weston Brands LLC, Cleveland, Ohio 44149

WestonProducts.com

Veuillez communiquer avec le service clientèle des produits Weston AVANT de retourner cet appareil au détaillant.

CONSERVER CES DIRECTIVES!

Veuillez les consulter fréquemment et les utiliser pour la formation.

¡ATENCIÓN!

Revise completamente el envase y compruebe que no falten partes o que algún producto esté dañado.

si el producto está dañado por el transporte, solicite asistencia al distribuidor.

Para todas aquellas preguntas referentes al uso del producto, partes faltantes, daño del producto, dicultad

o activación de la garantía, comuníquese con el equipo de servicio al cliente de weston Brands:

desde las 8:00 am hasta las 5:00 pm ET, de lunes a viernes

[email protected]

Línea de Servicio al Cliente para Residentes de EE.UU.: 1.800.814.4895 (Fuera de EE.UU., llame al: 001-

1-440-638-3131) Weston Brands LLC, Cleveland, Ohio 44149

WestonProducts.com

NO devuelva este artículo al vendedor minorista antes de comunicarse con Servicio al Cliente de

Weston Brands.

¡GUARDE ESTAS INSTRUCCIONES!

Consulte estas instrucciones y úselas para enseñar sobre el uso de este producto a otras personas.

Weston 83-2015-W User guide

Brand: Weston

Model: 83-2015-W

Type: User guide

Download PDF

report

in other languages

français: Weston 83-2015-W Mode d'emploi
español: Weston 83-2015-W Guía del usuario

Weston 83-2015-W User guide

Weston 83-2015-W User guide

in other languages

Related papers

Other documents