Simrad IS42J Installation guide

Brand: Simrad

Model: IS42J

Type: Installation guide

A. Display unit

B. Removable bezel

C. Suncover

D. J1939 and power cable

E. NMEA 2000 kit

- Micro-C Drop cable

- Micro-C T-Connector

F. Mounting kit

- Mounting template

- Screws

- Screw jig

IS42J

INSTALLATION GUIDE

Details

Parts included

For product manuals, technical

specications, certicates and

declarations, refer to the product

website:

www.simrad-yachting.com

*988-12229-001*

Technical specication

Electrical

Supply voltage 12 V DC (10 - 15 V DC)

Fuse rating 3 A

Power consumption max 2.16 W (160 mA at 13.5 V)

Network load 1 LEN

Display

Size 4.1” diagonal, 4:3 Aspect ratio

Resolution 320 x 240 pixels

Brightness 1200 nits

Viewing angles 80° top/bottom, 80° left/right

Environmental

Waterproof rating IPx7

Operating temperature -25°C to + 65°C (-13°F to +149 ºF)

Storage temperature -40°C to + 85°C (-40°F to +185 ºF)

¼ Note: For engine adapter cables, refer to www.simrad-yachting.com

70.0 mm

(2.75”)

36.5 mm

(1.43”)

118.0 mm

(4.64”)

115.0 mm

(4.53”)

28.5 mm

(1.12”)

57.0 mm

(2.30”)

NMEA 2000 backbone

J1939 CAN bus 1 (Primary)

J1939 CAN bus 2 (Secondary)

USB connector

Mounting

Wiring

PIN Description Color

A CAN2_H Brown

B CAN2_L Red

C Not used Black

PIN Description Color

A CAN1_H Blue

B CAN1_L Green

C Not used Black

1 3 42

Power on by switchPower on by supply

FD E

Item Description Color

D Power wire Orange

E Power ON wire Yellow

F DC negative wire Black

Item Description

G Main power switch

H Fuse

I Power on switch/ignition switch

To turn the unit on:

1. Apply power to the power wire (D)

2. Apply power to the power ON wire (E),

permanently or momentarily

To turn the unit o:

Switch o the main power to the unit (G)

Simrad IS42J Installation guide

Simrad IS42J Installation guide

Simrad IS42J Installation guide

Related papers