ClosetMaid 56-127 In. Classic White Closet kit Installation guide

SpaceCreations Combo Kits

Installation Tips

56” - 127” Reach In

6105540

08/18

Tools you will need for assembly:

.50 in.

.25 in.

Getting Started

General Tips

• Pleaserefertotheinstructionsheetprovidedintheproductpackageforthespecicsonrequired

& recommended tools for the assembly of the products.

• Take an inventory of the parts for the products purchased to insure you have everything you need

for the installation.

• Pre-plan the placement of the towers.

Parts List

1 - SPC Frame 30X14

• Assemble and build your towers.

• Placeyourtowers,makingsuretoaxthemtothewallasdirected.

• Measure the length that the rods will need to be for each side. Make sure the span between units

orunitandwallisnotgreaterthan48in.Thetopshelvesandclosetrodstamaximumspaceof

48 in.

• Theexpandableclosetrodsare30in.to48in.long.Ifthelengthisshorterthan30in.therodwill

need to be cut.

• Installtheclosetrodsandtopshelves.

• Assemble and install any drawers into the tower unit (sold separately).

3 - SPC Shelf Kit 30X14

4 - SPC Casual Handle

Nickel

3 - SPC Drawer Kit 12X30

4 - SPC Top Shelf Kit

3 - SPC 48” Hang Rod

Kit Nickel

Download PDF