ClosetMaid 17029 Installation guide

Selectives Combo Kits

Installation Tips

Basic Kit

17029

03/15

Tools you will need for assembly:

.50 in.

.25 in.

Getting Started

General Tips

• Pleaserefertotheinstructionsheetprovidedintheproductpackageforthespecicsonre-

quired & recommended tools and the assembling the products.

• Take an inventory of the parts for the products purchased to insure you have everything you

need for the installation.

• Pre-plan the placement of the towers.

Parts List

3 - Selectives

Top Shelves

3 - Shelf Support Kits

1 - Selectives 25”

White Custom Closet Organizer

• Assemble and build your towers.

• Placeyourtowers,makingsuretoafxthemtothewallasdirected.

•

• Measure the length that the rods will need to be for each side. Make sure that they span be-

tweenunitsorunitandwallisnotgreaterthan48in.Thetopshelvesandclosetrodstamaxi-

mum span of 48 in.

•

• Theexpandableclosetrodsare30in.to48in.long.Ifthelengthisshorterthan30in.therod

will need to be cut.

• Installtheclosetrodsandtopshelves.

•

• Assemble and install any doors and drawers into the tower unit.

Download PDF