Product Dimensions
Cabinet Features
SUNSTONE METAL PRODUCTS
DESCRIPTION
18" Full Height Wall Cabinet with Right-
Swing Single Door and Four Interior
Shelves.
18" Full Height Right-Swing Single
Door Wall Cabinet w/Four Shelves
Item No. SWC18FSDR
PRODUCT
16004 CENTRAL COMMERCE DR.
PFLUGERVILLE, TEXAS 78660
Tel: 888.934.9449
Bus: 512.487.5116
Fax: 512.487.7016
18"W x 14"D (w/Panel) x 42"H
or 44"H (w/Crown)
MATERIAL SPECS
304 Stainless Steel entire
structure, 18 Gauge for Door
Panel , 18 Gauge for Cabinet
Box, 18 Gauge for Shelf,
Handles are made of Solid 304
Stainless Steel Bar.
•Lifetime Structure Warranty
•304 Stainless Steel Structure
•304 SS Rod Handles
•2" Crown Molding
•Pin-Lock & Screwed Installation
•Cabinet Style Door Hinges
•Covered Access Ports
•Four Interior Shelves
Wall Cabinet Installation -
See full Cabinet Island Instruction for complete details
PRODUCT DIMENSIONS
18" Cabinet Width
42" Cabinet Height
14" Depth
w/Door
Base Cabinet Height
is 34-1/2" W/Legs
measured without
Counter Top. Base Cabinets
are adjustable up to 36" Max
Elevate Cabinet
Spacing 14" to 18" Above
Base Cabinets
Use Included Hardware
to Mount Wall Cabinet
Support Rails. Measurement
from Top Edge of upper rail
to Bottom Edge of lower rail
spacing is 40-1/2" Inches.
Cabinet Bottom Support
Rail Cups around bottom
edge of cabinet, securing
into stationary position
Notice Interlocking Teeth
Connect into each other
Cabinet Hooks into
each Sleeve along
Support Rail allowing
Cabinet to Free Hang
against wall
Easy Pin-Lock
Removable
Crown Molding
5" x 4" Removable
Top Cabinet Panel
for Light Installation
Snap-On Plastic
Utility Port Covers
All Shelves are Removable
but not adjustable to allow
for larger stored items
2" Height Crown
Molding
/
