Sunstone SWC12ECR Installation guide

Sunstone
Brand
Sunstone
Model
SWC12ECR
Type
Installation guide

This manual is also suitable for

Wall Cabinet Component & Spacer Panels
SUNSTONE METAL PRODUCTS
DESCRIPTION
Match below Item Numbers with
corresponding Panels and Componets
Wall Cabinet Spacer &
Component Group
PRODUCT
16004 CENTRAL COMMERCE DR.
PFLUGERVILLE, TEXAS 78660
Tel: 888.934.9449
Bus: 512.487.5116
Fax: 512.487.7016
See Drawing Diagram for
Dimensions
304 Stainless Steel entire
structure, 18 Gauge for Door
Panel , 18 Gauge for Cabinet
Box, 18 Gauge for Shelf,
Handles are made of Solid 304
Stainless Steel Bar.
A)SWC42EP -42" Height End Panel
B)SWC21EP -21" Height End Panel
C)SWC12ECR -13" End Crown Panel
D)SWC3SPF90 -3" X 3"Corner Spacer
E)SWC3SPF -3" Full Height Spacer
F)SWC6SPF -6" Full Height Spacer
PRODUCT DIMENSIONS
13" WIDTH
42" HEIGHT
12" WIDTH
42" HEIGHT
42" HEIGHT
42" HEIGHT
21" HEIGHT
13" WIDTH
2" HEIGHT
2" ADDITIONAL CROWN
PANEL HEIGHT
END PANEL IS 1" INCH THICK
END PANEL IS 1" INCH THICK
SWC12ECR
A) SWC13FEP
E) SWC3SPF
C) SWC12ECR
A) SWC42EP
F) SWC6SPF
D) SWC3SP90
B) SWC21EP
A) SWC42EP
C) SWC12ECR
D) SWC3SPF90
E) SWC3SPF
F) SWC6SPF
B) SWC21EP
EXAMPLE WALL CABINET CONFIGURATION
3" x 3"
  • Page 1 1

Sunstone SWC12ECR Installation guide

Sunstone
Brand
Sunstone
Model
SWC12ECR
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents